mirror of
https://github.com/PiSugar/PiSugar.git
synced 2026-11-19 14:36:30 -05:00
Updated PiSugarS Serial (markdown)
parent
6c16e9ab49
commit
7860ff0219
1 changed files with 4 additions and 4 deletions
|
|
@ -37,7 +37,7 @@ When the battery voltage is lower than 3V, PiSugar S will shut down immediately.
|
|||
Both threshold voltages can be adjusted by rewinding the resistor on the circuit board, but we highly recommand do not modify them, If you really have such demand, please contact us.
|
||||
|
||||
# Function comparison
|
||||
| |PiSugar 1| PiSugar S| PiSugar S Plus | PiSugar 2| PiSugar 2 Pro|
|
||||
| |PiSugar 1| PiSugar S| PiSugar S Plus | PiSugar 2| PiSugar 2 Plus|
|
||||
|----------------------------------------------------------------------------------------|------------------------------|------------------------------|------------------------------|------------------------------|------------------------------|
|
||||
| zero | Completely compatible| Completely compatible| Compatible | Completely compatible| Compatible |
|
||||
| 3A/3B/3B+/4B | Not Support| Compatible | Completely compatible| Compatible | Completely compatible|
|
||||
|
|
@ -90,11 +90,11 @@ Both threshold voltages can be adjusted by rewinding the resistor on the circuit
|
|||
| 10 | Power On Pad | |
|
||||
| 11 | 5V Output Pad | Connected to system 5V output, connected to Raspberry Pi 5V |
|
||||
|
||||
# Charging (Same as PiSugar2)
|
||||
Please use PiSugar's type-c or micro USB port for charging.
|
||||
# Charging
|
||||
5V 3A
|
||||
|
||||
# Notice
|
||||
Pisugar S pro use I2C SCL gpio to startup the RaspberryPi system, so the automatic startup function and the custom button cannot be used together with I2C communication
|
||||
Pisugar S and PiSugar S Plus use I2C SCL gpio to startup the RaspberryPi system, so the automatic startup function and the custom button cannot be used together with I2C communication
|
||||
|
||||
# Documents
|
||||
Please refer to: https://github.com/PiSugar/pisugar-documents
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue