Add a conveyance test and do not run badblocks on SSDs.

This commit is contained in:
dak180 2018-01-20 23:27:57 -05:00
parent a8791c21af
commit 4feb21a0e1
No known key found for this signature in database
GPG key ID: 6E2DC12780B8BB51

View file

@ -203,7 +203,7 @@ SMART_capabilities="$(smartctl -c "/dev/${driveID}")"
SMART_info="$(smartctl -i "/dev/${driveID}")"
# Obtain the disk model and serial number:
# Obtain the disk model:
Disk_Model="$(echo "${SMART_info}" | grep "Device Model" | awk '{print $3, $4, $5}' | sed -e 's:^[ \t]*::' -e 's:[ \t]*$::' | sed -e 's: :_:')"
@ -211,8 +211,16 @@ if [ -z "$Disk_Model" ]; then
Disk_Model="$(echo "${SMART_info}" | grep "Model Family" | awk '{print $3, $4, $5}' | sed -e 's:^[ \t]*::' -e 's:[ \t]*$::' | sed -e 's: :_:')"
fi
# Obtain the disk serial number:
Serial_Number="$(echo "${SMART_info}" | grep "Serial Number" | awk '{print $3}' | sed -e 's: :_:')"
# Test to see if disk is a SSD:
if echo "${SMART_info}" | grep "Rotation Rate:" | grep -q "Solid State Device"; then
driveType="ssd"
fi
# Form the log and bad blocks data filenames:
Log_File="burnin-${Disk_Model}_${Serial_Number}-$(date -u +%Y%m%d-%H%M+0).log"
@ -227,10 +235,14 @@ BB_File="${BB_Dir}/${BB_File}"
Short_Test_Minutes=$(echo "${SMART_capabilities}" | pcregrep -M 'Short self-test routine.*\n.*recommended polling time:' | sed -e 's:)::' -e 's:(::' | awk '{print $4}' | tr -d '\n')
#printf "Short_Test_Minutes=[%s]\n" ${Short_Test_Minutes}
Conveyance_Test_Minutes=$(echo "${SMART_capabilities}" | pcregrep -M 'Conveyance self-test routine.*\n.*recommended polling time:' | sed -e 's:)::' -e 's:(::' | awk '{print $4}' | tr -d '\n')
#printf "Conveyance_Test_Minutes=[%s]\n" ${Conveyance_Test_Minutes}
Extended_Test_Minutes=$(echo "${SMART_capabilities}" | pcregrep -M 'Extended self-test routine.*\n.*recommended polling time:' | sed -e 's:)::' -e 's:(::' | awk '{print $4}' | tr -d '\n')
#printf "Extended_Test_Minutes=[%s]\n" ${Extended_Test_Minutes}
Short_Test_Sleep="$((Short_Test_Minutes*60))"
Conveyance_Test_Sleep="$((Conveyance_Test_Minutes*60))"
Extended_Test_Sleep="$((Extended_Test_Minutes*60))"
# Selftest polling timeout interval, in hours
@ -318,6 +330,34 @@ run_short_test() {
echo_str "Finished SMART short test on drive /dev/${driveID}: $(date)"
}
run_conveyance_test() {
if [ -z "${Conveyance_Test_Minutes}" ]; then
push_header
echo_str "+ SMART conveyance test not supported by /dev/${driveID}; skipping."
push_header
eles
push_header
echo_str "+ Run SMART conveyance test on drive /dev/${driveID}: $(date)."
push_header
if [ "${Dry_Run}" -eq 0 ]; then
smartctl -t conveyance "/dev/${driveID}"
echo_str "Conveyance test started, sleeping ${Conveyance_Test_Sleep} seconds until it finishes."
sleep "${Conveyance_Test_Sleep}"
poll_selftest_complete
smartctl -l selftest "/dev/${driveID}" | tee -a "$Log_File"
else
echo_str "Dry run: would start the SMART conveyance test and sleep ${Conveyance_Test_Sleep} seconds until the test finishes."
fi
echo_str "Finished SMART conveyance test on drive /dev/${driveID}: $(date)."
fi
}
run_extended_test() {
push_header
echo_str "+ Run SMART extended test on drive /dev/${driveID}: $(date)"
@ -384,10 +424,13 @@ EOF
# Run the test sequence:
run_short_test
run_conveyance_test
run_extended_test
run_badblocks_test
run_short_test
run_extended_test
if [ ! "${driveType}" = "ssd" ]; then
run_badblocks_test
run_short_test
run_extended_test
fi
# Emit full device information to log:
tee -a "$Log_File" << EOF