**Femtofox is a Linux-based mesh development platform - a Raspberry Pi sized computer with onboard LoRa radio, capable of being run with only 0.3w, making it *ideal* for solar powered nodes.**
The Luckfox Pico Mini is the postage stamp sized heart of the Femtofox - a compact and power efficient Linux board, running a customized version of Ubuntu. Femtofox is an expansion of the Luckfox's capabilities, utilizing a custom PCB with a 30db LoRa radio (over 6x the transmit power of a RAK Wisblock or Heltec V3) to create a power efficient, tiny and highly capable Meshtastic Linux node.
The preconfigured images will reboot every 24 hours. If the internal clock is accurate, this will be at 3am. Reboot timing is set in `crontab`. To keep accurate time, an RTC module can be installed (see [supported hardware](supported_hardware.md)) or internet connectivity can be utilized for NTP via [Chrony](https://chrony-project.org/).
1. Ethernet over USB - most adapters should be supported, but I've only tested the RTL8152 chipset.
2. USB wifi (see [supported hardware](supported_hardware.md)).
3. Preconfigured Ubuntu images: ethernet via the castellated pins at the bottom of the board. See pinout at the bottom of this readme.
4. RDNIS via usb - [see this guide](https://web.archive.org/web/20241006173648/https://wiki.luckfox.com/Luckfox-Pico/Luckfox-Pico-Network-Sharing-1/). Note that in the preconfigured images USB is set to host mode, so you'll have to switch back to peripheral with `sudo luckfox-config`. This is not really recommended, but can be used in a pinch.
> The information on this page is given without warranty or guarantee. Links to vendors of products are for informational purposes only.
> Meshtastic® is a registered trademark of Meshtastic LLC. Meshtastic software components are released under various licenses, see GitHub for details. No warranty is provided - use at your own risk.