**The Luckfox Pico Mini is a compact and power efficient Linux capable board, capable of running Ubuntu. Femtofox is an expansion of the Luckfox's capabilities, combining a customized Ubuntu image with a custom PCB, integrating it with a LoRa radio to create a power efficient, cheap and small Meshtastic Linux node.**
The preconfigured images will reboot every 24 hours. If the internal clock is accurate, this will be at 3am. Reboot timing is set in `crontab`. To keep accurate time, an RTC module can be installed (see [supported hardware](supported_hardware.md)) or internet connectivity can be utilized for NTP via [Chrony](https://chrony-project.org/).
1. Ethernet over USB - most adapters should be supported, but I've only tested the RTL8152 chipset.
2. USB wifi (see [supported hardware](supported_hardware.md)).
3. Preconfigured Ubuntu images: ethernet via the castellated pins at the bottom of the board. See pinout at the bottom of this readme.
4. RDNIS via usb - [see this guide](https://web.archive.org/web/20241006173648/https://wiki.luckfox.com/Luckfox-Pico/Luckfox-Pico-Network-Sharing-1/). Note that in the preconfigured images USB is set to host mode, so you'll have to switch back to peripheral with `sudo luckfox-config`. This is not really recommended, but can be used in a pinch.
> The information on this page is given without warranty or guarantee. Links to vendors of products are for informational purposes only.
> Meshtastic® is a registered trademark of Meshtastic LLC. Meshtastic software components are released under various licenses, see GitHub for details. No warranty is provided - use at your own risk.