diff --git a/supported_hardware.md b/supported_hardware.md index fa7be70..0597fa4 100644 --- a/supported_hardware.md +++ b/supported_hardware.md @@ -10,6 +10,7 @@ Hardware Confirmed working Expected to work +Does not work Notes @@ -18,30 +19,42 @@ LoRa radios (working with Meshtasticd)
  • Waveshare RPi LoRa hat without GNSS*
  • Seeed Wio SX1262
  • Ebyte E220900M30S
  • AI Thinker RA-01SH
  • Heltec HT-RA62
  • Ebyte E22-900mm22s
  • Ebyte E22-900m22s
  • Any SPI LoRa radio that’s Meshtastic compatible
  • + *Waveshare RPi hat is not recommended as it has issues with sending longer messages. +MicroSD cards +
  • Kingston Endurance 32gb
  • Sandisk Ultra UHS-I 32gb
  • +Any reasonably fast (UHS-1 or better) card with 8gb or more + +Stick with reputable manufacturers (Kingston, PNY Samsung, Sandisk, Transcend…)
    The faster the better! Consider sticking with “endurance” cards, especially for remotely deployed nodes. + + RTC (real time clock)
  • DS3231M
  • DS1307
  • DS1337, DS1338, DS1340, other DS3231 variants + Some DS3231 modules are listed as having a supercapacitor - these are usually actually lithium coin cells. Meshtastic nodes USB+UART: RAK4631 with RAK19007 or RAK19003 base board + RAK4630 and 4631 are the same. USB wifi adapter chipsets -See below -See below + + +See below Misc. hardware
  • USB hubs (powered or not)
  • Thumb drives
  • SD card readers
  • + If power draw exceeds supply, the device will reboot, bootloop or hard crash. Unpowered USB hubs seem to be notorious for causing reboots. @@ -110,8 +123,8 @@ rtl8188eu, rtl8188eus -✔ -✔ +✔️ +✔️ Idle: 0.25w
    TXing: 0.4w
    Off: 0.025w Model tested:
    TP-LINK TL-WN725N V2 @@ -179,6 +192,13 @@ +rtl8192eu +✔️ +❌ + +Buggy + + rtl8192se @@ -187,10 +207,10 @@ rtl8273,8188,8191,8192 -✔ -X -rtl8192eu: Buggy + + + rtl8712u @@ -250,8 +270,8 @@ mt7601u -✔ -✔ +✔️ +✔️ Idle: 0.739w @@ -348,8 +368,8 @@ ar9271 -✔ -X +✔️ +❌ Buggy