diff --git a/meshtasticd/config.yaml b/meshtasticd/config.yaml
index 7b1c16c..9021fa7 100644
--- a/meshtasticd/config.yaml
+++ b/meshtasticd/config.yaml
@@ -9,17 +9,50 @@ Lora:
 
 ### Luckfox specific configs:
 
-#  Module: sx1262  # Waveshare SX126X XXXM
+## Waveshare SX126X XXXM
+## AI Thinker RA-01SH
+## Will work with any module with automatic RF switching, and with no TCXO
+#  Module: sx1262  
 #  gpiochip: 1 # subtract 32 from the gpio numbers
 #  DIO2_AS_RF_SWITCH: true
 #  CS: 16 #pin6 (GPIO pin 48 1C0)
 #  IRQ: 23  #pin17 (GPIO pin 55 1C7)
-#  Busy: 22 #pin16 (GPIO pin 54 1C6)
 #  Reset: 25 #pin13 (GPIO pin 57 1D1)
+#  Busy: 22 #pin16 (GPIO pin 54 1C6)
+#  spidev: spidev0.0 #pins are (CS=6, CLK=7, MOSI=8, MISO=9)
+#  spiSpeed: 2000000
+
+## Heltec HT-RA62, Seeed WIO SX1262
+## Will work with any module with automatic RF switching, and with TCXO
+#  Module: sx1262
+#  gpiochip: 1 # subtract 32 from the gpio numbers
+#  DIO2_AS_RF_SWITCH: true
+#  DIO3_TCXO_VOLTAGE: true
+#  CS: 16 #pin6 (GPIO pin 48 1C0)
+#  IRQ: 23  #pin17 (GPIO pin 55 1C7)
+#  Reset: 25 #pin13 (GPIO pin 57 1D1)
+#  Busy: 22 #pin16 (GPIO pin 54 1C6)
+#  spidev: spidev0.0 #pins are (CS=6, CLK=7, MOSI=8, MISO=9)
+#  spiSpeed: 2000000
+
+## Ebyte E22-900M30S, E22-900M22S with no external RF switching setup
+## Will work with any module without RF switching, and with TCXO
+#  Module: sx1262
+#  gpiochip: 1 # subtract 32 from the gpio numbers
+#  DIO2_AS_RF_SWITCH: true
+#  DIO3_TCXO_VOLTAGE: true
+#  CS: 16 #pin6 / GPIO48 1C0
+#  IRQ: 23  #pin17 / GPIO55 1C7
+#  Busy: 22 #pin16 / GPIO54 1C6
+#  Reset: 25 #pin13 / GPIO57 1D1 
+#  RXen: 24 #pin12 / GPIO56 1D0
+#  #TXen: bridge to DIO2 on E22 module
 #  spidev: spidev0.0
 #  spiSpeed: 2000000
 
-#  Module: sx1262  # Bare E22-900M30S or similar
+## Ebyte E22-900MM22S with no external RF switching setup
+## Will work with any module without RF switching and no TCXO
+#  Module: sx1262  
 #  gpiochip: 1 # subtract 32 from the gpio numbers
 #  DIO2_AS_RF_SWITCH: true
 #  DIO3_TCXO_VOLTAGE: true
@@ -174,16 +207,16 @@ Input:
 #  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
 ###
-
+  
 Logging:
   LogLevel: debug # debug, info, warn, error
   TraceFile: /var/log/meshtasticd.json
   AsciiLogs: true     # default if not specified is !isatty() on stdout
-
+  
 Webserver:
   Port: 443 # Port for Webserver & Webservices
   RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer
-
+  
 General:
   MaxNodes: 200
   MaxMessageQueue: 100