From 13d1e6fc41ae74058260f7b8634ccac4e80e8ef7 Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Wed, 8 Jan 2025 14:58:31 +0200 Subject: [PATCH] usb_config.md updated from https://stackedit.io/ --- usb_config.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/usb_config.md b/usb_config.md index 3938482..a02cad3 100644 --- a/usb_config.md +++ b/usb_config.md @@ -68,7 +68,7 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in | LED blink pattern | Meaning | Possible causes | Solutions | |--|--|--|--| |
⚠️
________________
1 very long blink, lasting 5 seconds| Failed to mount USB drive. Ignoring.|
  • Invalid filesystem
  • Corrupted partition table
  • Defective USB drive
  • Defective USB OTG adapter |
  • Use a supported partition (FAT32, exFAT, NTFS, ext4)
  • Repair partition table
  • Try another USB drive
  • Try another USB OTG adapter | -|
    ⚠️
    \_\_\_\_\_  \_\_\_\_\_
    2 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt contains the `dont_run_config_if_log_exists` line and a log is present on the USB drive. Ignoring.| Misconfiguration. | Remove log from USB drive or remove `dont_run_config_if_log_exists` line from femtofox-config.txt | +|
    ⚠️
    \_\_\_\_\_  \_\_\_\_\_
    2 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring.| Misconfiguration. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt | |
    ⚠️
    \_\_\_\_\_  \_\_\_\_\_  \_\_\_\_\_
    3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring.| Config file missing. | Create configuration file as described above. | |
    ⚠️
    \_\_\_\_\_  \_\_\_\_\_  \_\_\_\_\_  \_\_\_\_\_  \_\_\_\_\_
    5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring.| Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. | |
    ⚠️
    \_\_\_  \_\_\_  \_  \_  \_\_\_  \_\_\_  \_  \_
    2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully.|
  • The error may be transient.
  • Configuration file may contain improper data. |
  • Try again.
  • Check configuration file contents as described above.
  • Check the log.

    This pattern may flash before other patterns. The pattern will repeat once for each failed setting.| @@ -78,6 +78,6 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in > [!NOTE] > Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete. \ No newline at end of file