diff --git a/usb_config.md b/usb_config.md index be040b4..d868dc4 100644 --- a/usb_config.md +++ b/usb_config.md @@ -79,13 +79,13 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in | LED blink pattern | Meaning | Possible causes | Solutions | | ---------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -|
⚠️
**________________**
1 very long blink, lasting 5 seconds | Failed to mount USB drive. Ignoring. |
  • Invalid filesystem
  • Corrupted partition table
  • Defective USB drive
  • Defective USB OTG adapter |
  • Use a supported partition (FAT32, exFAT, NTFS, ext4)
  • Repair partition table
  • Try another USB drive
  • Try another USB OTG adapter | -|
    ⚠️
    **__**
    2 long blinks, each lasting 1.5 seconds | femtofox-config.txt is configured to skip if log exists. | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB driver>
  • Remove `dont_run_if_log_exists` line from femtofox-config.txt | -|
    ⚠️
    ━━━ ━━━ ━━━**
    3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. | -|
    ⚠️
    **─── ─── ─── ─── ───**
    5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. | +|
    ⚠️
    **──────────**
    1 very long blink, lasting 5 seconds | Failed to mount USB drive. Ignoring. |
  • Invalid filesystem
  • Corrupted partition table
  • Defective USB drive
  • Defective USB OTG adapter |
  • Use a supported partition (FAT32, exFAT, NTFS, ext4)
  • Repair partition table
  • Try another USB drive
  • Try another USB OTG adapter | +|
    ⚠️
    **───   ───**
    2 long blinks, each lasting 1.5 seconds | femtofox-config.txt is configured to skip if log exists. | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB driver>
  • Remove `dont_run_if_log_exists` line from femtofox-config.txt | +|
    ⚠️
    **───   ───   ───**
    3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. | +|
    ⚠️
    **───   ───   ───   ───   ───**
    5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. | |
    ⚠️
    **──   ──   -   -**
    2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. |
  • The error may be transient.
  • Configuration file may contain improper data. |
  • Try again.
  • Check configuration file contents as described above.
  • Check the log.

    This pattern may flash before other patterns. The pattern will repeat once for each failed setting. | |
    ✅
    **. . . . . . . . . .**
    10 very fast blinks, each lasting 1/8th of a second | USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.
    Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. | | -|
    ✅
    **__ _ _ _ _**
    5 medium blinks, each lasting 0.5 seconds | Boot complete. Appears on every successful boot and always appears last. | | | +|
    ✅
    **─   ─   ─   ─   ─  &nb**
    5 medium blinks, each lasting 0.5 seconds | Boot complete. Appears on every successful boot and always appears last. | | | > \[!NOTE\] > Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete. @@ -182,5 +182,5 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in > \[!NOTE\] > Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete. \ No newline at end of file