diff --git a/README.md b/README.md index b8b2400..65be162 100644 --- a/README.md +++ b/README.md @@ -56,6 +56,7 @@
  • Drivers for CH341, CH343, CP210x and generic serial over USB - tested working with ch341 (e.g. RAK)
  • Drivers for real time clock over i2c - tested working with DS3231 with DS1307 driver (should be compatible with DS1307, DS1337 and DS3231).
  • +

    See supported hardware below.

    Also, I turned off the activity LED. Every μW counts!

    I’ve built three Ubuntu 22.04.5 LTS images with Luckfox’s SDK:

      @@ -78,7 +79,34 @@
    1. Ethernet over USB - most adapters should be supported, but I’ve only tested the RTL8152 chipset.
    2. Preconfigured ubuntu images: ethernet via the castellated pins at the bottom of the board. See pinout at the bottom of this readme. Note that the MAC address for onboard ethernet is 1a:cf:50:33:5f:92 - if you need to change this, sudo nano /etc/network/interfaces.
    -

    Installation

    +

    Supported hardware

    + + + + + + + + + + + + + + + + + + + + + + + + + + +
    HardwareConfirmed workingExpected to work
    RTC (real time clock)DS3231, DS1307
    sdf
    sdf

    Installation

    Choosing a MicroSD card: Any reasonably fast MicroSD card of 32gb or higher should work, but ideally use a card that supports UHS-1 or higher, and is rated for high endurance.

    1. Uncompress the 7z file - will require ~29gb of space. In windows, use 7-zip.