From 34857a313fd639301812f557e4aa2ede1d091b01 Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Fri, 24 Jan 2025 18:32:34 +0200 Subject: [PATCH] foxbuntu_install.md updated from https://stackedit.io/ --- foxbuntu_install.md | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/foxbuntu_install.md b/foxbuntu_install.md index 2f22aaa..cfd4390 100644 --- a/foxbuntu_install.md +++ b/foxbuntu_install.md @@ -21,10 +21,8 @@ To install Foxbuntu, you'll need the following: * Use a USB UART serial adapter to connect to UART2 (serial debug pins). * Use an ethernet cable and SSH in. Femtofox's default hostname is femtofox.local. 5. Connect the Femtofox to power, either via the *power USB-C port* (Pro model only, on the same side as the ethernet port) or via the power-in JST power plug. -6. The Femtofox will perform its first boot. This can take up to 5 minutes (subsequent boots ~40 seconds). When boot is complete, the USR LED will blink 5 times, 1/2 a second each. At this point, Meshtastic should be running and if you plug in a wifi adapter it should work. -7. To connect to your Femtofox via SSH, open [PuTTY](https://www.putty.org/) or your favorite SSH client and connect to your Femtofox via `femtofox.local` or its IP (check your router). - * Username: `femto` - * Password: `fox` +6. The Femtofox will perform its first boot. This can take up to 5 minutes (subsequent boots ~40 seconds). When boot is complete, the USR LED will blink 5 times, 1/2 a second each. +7. Default username and password is `femto`:`femto`. You are required to change the password on first login. \ No newline at end of file