diff --git a/usb_config.md b/usb_config.md index 0f485a9..09d9f87 100644 --- a/usb_config.md +++ b/usb_config.md @@ -80,7 +80,7 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in | LED blink pattern | Meaning | Possible causes | Solutions | | ---------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | |
⚠️
\_______________\_
1 very long blink, lasting 5 seconds | Failed to mount USB drive. Ignoring. |
  • Invalid filesystem
  • Corrupted partition table
  • Defective USB drive
  • Defective USB OTG adapter |
  • Use a supported partition (FAT32, exFAT, NTFS, ext4)
  • Repair partition table
  • Try another USB drive
  • Try another USB OTG adapter | -|
    ⚠️
    \_**\_\_  \_\_**\_
    2 long blinks, each lasting 1.5 seconds | femtofox-config.txt is configured to skip if log exists. | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt | +|
    ⚠️
    **_\_\_  \_\__**
    2 long blinks, each lasting 1.5 seconds | femtofox-config.txt is configured to skip if log exists. | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt | |
    ⚠️
    \_**_\_  \__**\_  \____\_
    3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. | |
    ⚠️
    \_**_\_  \__**\_  \_**_\_  \__**\_  \____\_
    5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. | |
    ⚠️2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. |
  • The error may be transient.
  • Configuration file may contain improper data. |
  • Try again.
  • Check configuration file contents as described above.
  • Check the log.

    This pattern may flash before other patterns. The pattern will repeat once for each failed setting. |