From 46d49d5ac201ba08107b443dddcf8325f3bf0f7c Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Mon, 3 Feb 2025 16:00:38 +0200 Subject: [PATCH] usb_config.md updated from https://stackedit.io/ --- usb_config.md | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/usb_config.md b/usb_config.md index 1ace2d6..b8cce97 100644 --- a/usb_config.md +++ b/usb_config.md @@ -11,7 +11,7 @@ Configurable settings are: - Activity LED (blinky light - disable for minor power savings) - Meshtastic: - [LoRa radio model](https://github.com/femtofox/femtofox/blob/main/supported_hardware.md) - - [URL](https://meshtastic.org/docs/software/python/cli/#--seturl-seturl) (used to configure LoRa settings/channels and generate the QR code) + - [URL](https://meshtastic.org/docs/software/python/cli/#--seturl-seturl) (used to configure LoRa settingschannels and generate the QR code) - Security: [public key](https://meshtastic.org/docs/configuration/radio/security/#public-key) - Security: [private key](https://meshtastic.org/docs/configuration/radio/security/#private-key) - Security: Add [Admin Key](https://meshtastic.org/docs/configuration/radio/security/#admin-key) @@ -71,18 +71,21 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in  | LED blink pattern | Meaning | Possible causes | Solutions | |--|--|--|--| -|
⚠️
**──────────**
1 very long blink, lasting 5 seconds | Failed to mount USB drive. Ignoring. | • Invalid filesystem
• Corrupted partition table
• Defective USB drive
• Defective USB OTG adapter | • Use a supported partition (FAT32, exFAT, NTFS, ext4)
• Repair partition table
• Try another USB drive
• Try another USB OTG adapter |
-|
⚠️
**─── ───**
2 long blinks, each lasting 1.5 seconds | femtofox-config.txt is configured to skip if log exists. | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt |
-|
⚠️
**─── ─── ───**
3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. |
-|
⚠️
**─── ─── ─── ─── ───**
5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. |
-|
⚠️
**── ── - -**
2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. | • The error may be transient.
• Configuration file may contain improper data. | • Try again.
• Check configuration file contents as described above.
• Check the log.
This pattern may flash before other patterns. The pattern will repeat once for each failed setting. |
-|
✅
**· · · · · · · · · ·**
10 very fast blinks, each lasting 1/8th of a second | USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.
Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. | |
-|
✅
**─ ─ ─ ─ ─**
5 medium blinks, each lasting 0.5 seconds | Boot complete. Appears on every successful boot and always appears last.| | Hooray! |
+|
⚠️
**──────────**
1 very long blink, lasting 5 seconds LED blink pattern ai ilessoution | •| Failed to mount USB drive. Ignoring.| Invalid filesystem
• li>Corrupted partition table
• Defective USB drive
• Defective USB OTG adapter | • Use a supported partition (FAT32, exFAT, NTFS, ext4)
• Repair partition table
• Try another USB drive
• Try another USB OTG adapter |
+|
⚠️
**─── ───**
2 long5 seconds |g exists. | femtofox-config.txt is configured to skip if lo USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt |
+|
⚠️
**─── ─── ───**
3 long blinks, each lasting 1.5 seconds blinks, each lasting 1. | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. |
+|
⚠️
**─── ─── ─── ─── ───**
5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. |
+|
⚠️
**── ── - -**
2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. | • The error may be transient.
• >Configuration file may contain improper data. | • Try again.
• >Check configuration file contents as described above.
• >Check the log.
This pattern may flash before other patterns. The pattern will repeat once for each failed setting. |
+|
✅
**· · · · · · · · · ·**
10 very fast blinks, each lasting 1/8th of a second | USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.
Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. | |
+|
✅
**─ ─ ─ ─ ─**
+5 medium blinks, each lasting 0.5 seconds | Boot complete. Appears on every successful boot and always appears last.| | Hooray! |
> \[!NOTE\]
> Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete.
\ No newline at end of file