diff --git a/usbconfig.md b/usbconfig.md index fef1b8b..84db177 100644 --- a/usbconfig.md +++ b/usbconfig.md @@ -4,7 +4,7 @@ ---

USB configuration

-

To configure Femtofox wifi settings, you can insert a USB flash drive containing a configuration file named femtofox-config.txt.
+

To configure Femtofox wifi settings, you can insert a USB flash drive containing a configuration file named femtofox-config.txt. The system will automatically recognize, mount and implement the settings you specify.
The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only) or ext4 partition. Add a file named femtofox-config.txt and add the following lines, keeping in mind this is CaSe sEnSiTiVe:

ssid="Your SSID name"
 psk="wifipassword"
@@ -60,6 +60,7 @@ country="US"
 
 
 
-

Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the attempt to mount the USB drive failed, and that boot is complete.

+

[!NOTE]
+Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the attempt to mount the USB drive failed, and that boot is complete.