From 20a3f84c113cf66b7b2dfd316de1f06ec6908dcf Mon Sep 17 00:00:00 2001
From: noon92 <40807970+noon92@users.noreply.github.com>
Date: Mon, 9 Dec 2024 20:20:21 +0200
Subject: [PATCH 1/5] supported_hardware.md updated from https://stackedit.io/
---
supported_hardware.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/supported_hardware.md b/supported_hardware.md
index 582eb38..3966df5 100644
--- a/supported_hardware.md
+++ b/supported_hardware.md
@@ -363,9 +363,9 @@
| rtl8187 |
|
|
From 7d97cafc1692bc05c565111f9f5d04ffe4a6a577 Mon Sep 17 00:00:00 2001
From: noon92 <40807970+noon92@users.noreply.github.com>
Date: Mon, 9 Dec 2024 20:55:40 +0200
Subject: [PATCH 4/5] usb_config.md updated from https://stackedit.io/
---
usb_config.md | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/usb_config.md b/usb_config.md
index 54e2385..13c6e8d 100644
--- a/usb_config.md
+++ b/usb_config.md
@@ -56,7 +56,7 @@ Options are:
[!CAUTION]
-Attempting to set wifi settings via USB configuration tool without a wifi adapter connected will lead to a hard crash - you will need to disconnect and reconnect power to recover.
+Attempting to set wifi settings via USB configuration tool without a wifi adapter connected will lead to a 5 minute hang at boot - either disconnect and reconnect power or wait the full 5 minutes to to recover.
To apply your configuration, reboot the Femtofox with the USB drive plugged in. No other USB drives can be plugged in at the same time.
A log (femtofox-config.log) is saved to /home/femto and the USB drive (except on NTFS, which is read only).
@@ -76,37 +76,37 @@ A log (femtofox-config.log) is saved to /home/femto an
-⚠️ 1 very long blink, lasting 4 seconds _____________ |
+⚠️ _____________ 1 very long blink, lasting 4 seconds |
Failed to mount USB drive. Ignoring. |
Invalid filesystemCorrupted partition tableDefective USB driveDefective USB OTG adapter |
Use a supported partition (FAT32, exFAT, NTFS, ext4)Repair partition tableTry another USB driveTry another USB OTG adapter |
-⚠️ 3 long blinks, each lasting 1.5 seconds _____ _____ _____ |
+⚠️ _____ _____ _____ 3 long blinks, each lasting 1.5 seconds |
USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. |
Config file missing. |
Create configuration file as described above. |
-⚠️ 5 long blinks, each lasting 1.5 seconds _____ _____ _____ _____ _____ |
+⚠️ _____ _____ _____ _____ _____ 5 long blinks, each lasting 1.5 seconds |
USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. |
Configuration file improperly formatted or contains no data. |
Check configuration file contents as described above. |
-⚠️ 2 long blinks, each lasting 1 seconds, then 2 short blinks, each lasting 1/4 of a second. Repeats twice ___ ___ _ _ ___ ___ _ _ |
+⚠️ ___ ___ _ _ ___ ___ _ _ 2 long blinks, each lasting 1 seconds, then 2 short blinks, each lasting 1/4 of a second. Repeats twice |
Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. |
The error may be transient.Configuration file may contain improper data. |
Try again.Check configuration file contents as described above.Check the log.
This pattern may flash before other patterns. The pattern will repeat once for each failed setting. |
-✅ 10 very fast blinks, each lasting 1/8th of a second . . . . . . . . . . |
+✅ . . . . . . . . . . 10 very fast blinks, each lasting 1/8th of a second |
USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. |
This does not mean that the information in the config file is correct - only that it was readable. Note that the “success” boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. |
|
-✅ 5 medium blinks, each lasting 0.5 seconds __ __ __ __ __ |
+✅ __ __ __ __ __ 5 medium blinks, each lasting 0.5 seconds |
Boot complete. Appears on every successful boot and always appears last. |
|
|
From 70297ab09537119fd32ad45c6620ec2b1d481986 Mon Sep 17 00:00:00 2001
From: noon92 <40807970+noon92@users.noreply.github.com>
Date: Mon, 9 Dec 2024 21:38:52 +0200
Subject: [PATCH 5/5] usb_config.md updated from https://stackedit.io/
---
usb_config.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/usb_config.md b/usb_config.md
index 13c6e8d..595515e 100644
--- a/usb_config.md
+++ b/usb_config.md
@@ -56,7 +56,7 @@ Options are:
[!CAUTION]
-Attempting to set wifi settings via USB configuration tool without a wifi adapter connected will lead to a 5 minute hang at boot - either disconnect and reconnect power or wait the full 5 minutes to to recover.
+Attempting to set wifi settings via USB configuration tool without a wifi adapter connected will lead to a 5 minute hang while the configuration tool runs - either disconnect and reconnect power or wait the full 5 minutes to to recover.
To apply your configuration, reboot the Femtofox with the USB drive plugged in. No other USB drives can be plugged in at the same time.
A log (femtofox-config.log) is saved to /home/femto and the USB drive (except on NTFS, which is read only).