diff --git a/usbconfig.md b/usbconfig.md index 1d74c70..71e89fc 100644 --- a/usbconfig.md +++ b/usbconfig.md @@ -4,15 +4,27 @@ ---

USB configuration

-

To configure Femtofox wifi settings, you can insert a USB flash drive containing a configuration file. The system will automatically recognize, mount and implement the settings you specify.
+

To configure some Femtofox settings such as wifi, you can insert a USB flash drive containing a configuration file. The system will automatically recognize, mount and implement the settings you specify.
The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only) or ext4 partition. Add a file named femtofox-config.txt and add the following lines, keeping in mind this is CaSe sEnSiTiVe:

-
ssid="Your SSID name"
-psk="wifipassword"
-country="US"
+
wifi_ssid="Your SSID name"
+wifi_psk="wifipassword"
+wifi_country="US"
+lora_radio="ebyte-e22-900m30s"
 

[!NOTE]
-For country, insert your country’s two letter code (such as CA or IN) in capital letters.

+For wifi country, insert your country’s two letter code (such as CA or IN) in capital letters.

+

For LoRa radio, choose your radio from the supported hardware list.
+Options are:

+
    +
  • ebyte-e22-900m30sm
  • +
  • ebyte-e22-900m22s
  • +
  • e22-900mm22s
  • +
  • heltec-ht-ra62
  • +
  • seeed-wio-sx1262
  • +
  • waveshare-sx126x-xxxm
  • +
  • ai-thinker-ra-01sh
  • +

To apply your configuration, reboot the Femtofox with the USB drive plugged in. No other USB drives can be plugged in at the same time.

Boot codes

@@ -49,8 +61,8 @@ For country, insert your country’s two letter code (such as CA or IN) in capit ✅ 10 very fast blinks, each lasting 1/8th of a second -USB drive mounted successfully, and femtofox-config.txt was found and contained valid configuration data which was deployed. Wifi will now restart and boot will proceed. You can disconnect the USB drive. -Note that this does not mean that the information in the config file is correct - only that we were able to copy it to system configuration. +USB drive mounted successfully, and femtofox-config.txt was found and contained valid configuration data which was deployed. Any affected services will now restart. You can disconnect the USB drive. +Note that this does not mean that the information in the config file is correct - only that it was readable.