Replaced wifi-mesh-control code.

New code syncs wlan0 statte with meshtastic clients (settings, network, wifi enabled).
This commit is contained in:
Ruledo 2025-01-04 00:32:31 -08:00
parent 5bd14386a3
commit 677b95cda9

View file

@ -1,52 +1,95 @@
#!/bin/bash
ip link set wlan0 up
sleep 60 #wait 60 seconds so networking will be available during boot
# Initial value for comparison (start with an impossible value so it'll always implement the current value after boot)
previous_value=2
LOG_FILE="/var/log/meshtastic_wifi.log"
WIFI_STATE_FILE="/etc/wifi_state.txt"
PROTO_FILE="/root/.portduino/default/prefs/config.proto"
while true; do
if systemctl is-active --quiet meshtasticd; then
# Run the command to fetch the value
current_value=$(cat /root/.portduino/default/prefs/config.proto | protoc --decode_raw | awk '/4 {/, /}/ {if ($1 == "1:") print $2}')
log() {
echo "$(date) - $1" | tee -a "$LOG_FILE"
}
# Check if the value has changed
if [ "$current_value" != "$previous_value" ]; then
get_mobile_wifi_state() {
local proto_output
proto_output=$(cat "$PROTO_FILE" | protoc --decode_raw | awk '/4 {/, /}/ {if ($1 == "1:") print $2}')
[[ "$proto_output" == "1" ]] && echo "up" || echo "down"
}
if [ "$previous_value" -eq 1 ]; then
prev_text="Wifi on"
elif [ "$previous_value" -eq 2 ]; then
prev_text="Startup"
else
prev_text="Wifi off"
fi
if [ "$current_value" -eq 1 ]; then
cur_text="Wifi on"
else
cur_text="Wifi off"
fi
# Log the change
logger "Wifi mesh control: wifi setting changed: $prev_text -> $cur_text"
# Update the previous value for next comparison
previous_value="$current_value"
fi
# Take action based on the new value
if [ "$current_value" == "1" ]; then
ip link set wlan0 up
set_mobile_wifi_state() {
local state="$1"
local meshtastic_output
if [[ "$state" == "up" ]]; then
meshtastic_output=$(meshtastic --host 127.0.0.1 --set network.wifi_enabled true 2>&1)
else
ip link set wlan0 down
meshtastic_output=$(meshtastic --host 127.0.0.1 --set network.wifi_enabled false 2>&1)
fi
log "Set Meshtastic Wi-Fi state to $state. Output: $meshtastic_output"
}
set_wlan_state() {
local state="$1"
if [[ "$state" == "up" ]]; then
ip link set wlan0 up && log "Set wlan0 UP."
else
ip link set wlan0 down && log "Set wlan0 DOWN."
fi
}
validate_wifi_state_file() {
local state
state=$(cat "$WIFI_STATE_FILE" 2>/dev/null)
if [[ "$state" != "up" && "$state" != "down" ]]; then
echo "up" > "$WIFI_STATE_FILE"
log "Invalid wifi_state.txt content. Defaulting to up."
fi
}
sync_states() {
local text_state mobile_state
text_state=$(cat "$WIFI_STATE_FILE")
mobile_state=$(get_mobile_wifi_state)
if [[ "$text_state" != "$mobile_state" ]]; then
set_mobile_wifi_state "$text_state"
log "Synced mobile Wi-Fi state to $text_state."
fi
else
if ip link show wlan0 | grep -q 'state DOWN'; then
ip link set wlan0 up
logger "Wifi mesh control: Meshtasticd service is offline, turning wifi on."
current_wlan_state=$(ip link show wlan0 | grep -q 'state UP' && echo "up" || echo "down")
if [[ "$text_state" != "$current_wlan_state" ]]; then
set_wlan_state "$text_state"
log "Synced wlan0 state to $text_state."
fi
fi
}
monitor_changes() {
local previous_mobile_state previous_wlan_state
previous_mobile_state=$(get_mobile_wifi_state)
previous_wlan_state=$(ip link show wlan0 | grep -q 'state UP' && echo "up" || echo "down")
while true; do
local current_mobile_state current_wlan_state
current_mobile_state=$(get_mobile_wifi_state)
current_wlan_state=$(ip link show wlan0 | grep -q 'state UP' && echo "up" || echo "down")
if [[ "$current_mobile_state" != "$previous_mobile_state" ]]; then
log "Detected mobile Wi-Fi state change: $previous_mobile_state -> $current_mobile_state"
echo "$current_mobile_state" > "$WIFI_STATE_FILE"
set_wlan_state "$current_mobile_state"
previous_mobile_state="$current_mobile_state"
fi
if [[ "$current_wlan_state" != "$previous_wlan_state" ]]; then
log "Detected wlan0 state change: $previous_wlan_state -> $current_wlan_state"
echo "$current_wlan_state" > "$WIFI_STATE_FILE"
set_mobile_wifi_state "$current_wlan_state"
previous_wlan_state="$current_wlan_state"
fi
sleep 5
done
}
# Main Execution
validate_wifi_state_file
sync_states
monitor_changes
# wait 30 secs before checking again
sleep 30
done