diff --git a/foxbuntu/project/cfg/BoardConfig_IPC/overlay/overlay-luckfox-ubuntu/etc/rc.local b/foxbuntu/project/cfg/BoardConfig_IPC/overlay/overlay-luckfox-ubuntu/etc/rc.local
index b019d89..3c256d5 100755
--- a/foxbuntu/project/cfg/BoardConfig_IPC/overlay/overlay-luckfox-ubuntu/etc/rc.local
+++ b/foxbuntu/project/cfg/BoardConfig_IPC/overlay/overlay-luckfox-ubuntu/etc/rc.local
@@ -11,30 +11,15 @@ luckfox-config load
 #run only on first boot
 if [ -e "/usr/local/bin/.firstboot" ]; then
   /usr/local/bin/runonce.sh
-  # Wait for runonce.sh to complete
-  wait $!
+#  # Wait for runonce.sh to complete
+#  wait $!
 fi
 
 # try enable RTC
 echo 'ds1307 0x68' | sudo tee /sys/class/i2c-adapter/i2c-3/new_device > /dev/null 2>&1
 
 # activating USER LED
-echo 34 > /sys/class/gpio/export && echo out > /sys/class/gpio/gpio34/direction &
-
-# (
-#  if ip addr show wlan0 | grep -q 'inet '; then
-#    echo "Wifi (wlan0) is online.";
-#  else
-    # echo "Wifi (wlan0) is offline.";
-  # fi
-  # if ip addr show eth0 | grep -q 'inet '; then
-    # echo "Onboard ethernet (eth0) is online.";
-  # else
-    # echo "Onboard ethernet (eth0) is offline.";
-  # fi
-  # ) &
-
-
+echo 34 > /sys/class/gpio/export && echo out > /sys/class/gpio/gpio34/direction
 
 # necessary for internet over usb in otg mode (see https://web.archive.org/web/20241006173648/https://wiki.luckfox.com/Luckfox-Pico/Luckfox-Pico-Network-Sharing-1/)
 #sleep 5 && route add default gw 172.32.0.100 && echo "nameserver 8.8.8.8" >> /etc/resolv.conf
@@ -42,24 +27,22 @@ echo 34 > /sys/class/gpio/export && echo out > /sys/class/gpio/gpio34/direction
 # does not appear to lower power consumption, but needs more testing
 #(sleep 5 && cpufreq-set -u 408000 && echo "Boot complete, setting CPU frequency to 408mhz.") &
 
-  # run USB automount and config tool
-  /usr/local/bin/usbconfig.sh
-
-  # boot complete
-  (
-    echo "Disabling ACT LED..."
-    echo "none" > /sys/class/leds/work/trigger &
-    sleep 1
+# run USB automount and config tool
+/usr/local/bin/usbconfig.sh
 
+# boot complete
+(
+  echo "Disabling ACT LED..."
+  echo "none" > /sys/class/leds/work/trigger &
+  sleep 1
+  
   # blink successful boot code
-    for i in $(seq 1 5); do
-      echo 1 > /sys/class/gpio/gpio34/value;
-      sleep 0.5;
-      echo 0 > /sys/class/gpio/gpio34/value;
-      sleep 0.5;
-    done
-  )
-  echo "Boot complete."
-
+  for i in $(seq 1 5); do
+    echo 1 > /sys/class/gpio/gpio34/value;
+    sleep 0.5;
+    echo 0 > /sys/class/gpio/gpio34/value;
+    sleep 0.5;
+  done
+) &
 
 exit 0
\ No newline at end of file