mirror of
https://github.com/femtofox/femtofox.git
synced 2026-10-26 02:49:05 -04:00
usbconfig.md updated from https://stackedit.io/
This commit is contained in:
noon92
parent
b9871c0b69
commit
783f873132
1 changed files with 50 additions and 38 deletions
88
usbconfig.md
88
usbconfig.md
|
|
@ -9,23 +9,25 @@ Configurable settings are:</p>
|
|||
<ul>
|
||||
<li>Wifi SSID</li>
|
||||
<li>Wifi PSK (password)</li>
|
||||
<li>Wifi country</li>
|
||||
<li>
|
||||
- Wifi country</li>
|
||||
<li>Timezone</li>
|
||||
<li>Meshtastic:
|
||||
<ul>
|
||||
<li>LoRa radio model</li>
|
||||
<li><a href="https://meshtastic.org/docs/software/python/cli/#--seturl-seturl">URL</a> (used to configure LoRa settings and channels)</li>
|
||||
<li
|
||||
LoRa radio model</li>
|
||||
<li><a href="https://meshtastic.org/docs/software/python/cli/#--seturl-seturl">URL</a>) (used to configure LoRa settings and channels)</li>
|
||||
<li>Security: Add Admin Key</li>
|
||||
<li>Security: Clear Admin Key List</li>
|
||||
<li>Security: <a href="https://meshtastic.org/docs/configuration/radio/security/#admin-channel-enabled">Legacy Admin Channel</a> enable/disable</li>
|
||||
<li>dmin Key List</li>
|
||||
<li>Security: <a href="Security: [Legacy Ahttps://meshtastic.org/docs/configuration/radio/security/#admin-channel-enabled">Legacy Admin Channel</a> enable/disable</li>
|
||||
</ul>
|
||||
</li>
|
||||
</ul>
|
||||
<h3 id="instructions">Instructions</h3>
|
||||
<p>The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only - log will not be saved to drive) or ext4 partition. Add a file named <code>femtofox-config.txt</code> and whichever of the the following lines you want to set, keeping in mind this is CaSe sEnSiTiVe:</p>
|
||||
<p>
|
||||
The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only - log will not be saved to drive) or ext4 partition. Add a file named <code>femtofox-config.txt</code>` and whichever of the the following lines you want to set, keeping in mind this is CaSe sEnSiTiVe:</p>
|
||||
<pre><code>wifi_ssid="Your SSID name"
|
||||
wifi_psk="wifipassword"
|
||||
wifi_country="US"
|
||||
wifi_psk="wifipassword"wifi_country="US"
|
||||
timezone="America/New_York"
|
||||
meshtastic_lora_radio="ebyte-e22-900m30s"
|
||||
meshtastic_url="https://meshtastic.org/e/#CgMSAQESCAgBOAFAA0gB"
|
||||
|
|
@ -33,12 +35,13 @@ meshtastic_admin_key="base64:T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ="
|
|||
meshtastic_legacy_admin="true"
|
||||
</code></pre>
|
||||
<blockquote>
|
||||
<p>[!NOTE]<br>
|
||||
Enter as many or as few settings as you like.</p>
|
||||
<p>[!NOTE]>
|
||||
|
||||
> Enter as many or as few settings as you like.</p>
|
||||
<p>For <code>wifi_country</code>, insert your country’s two letter code (such as CA or IN) in capital letters.</p>
|
||||
<p>Use a timezone as it appears in <a href="https://en.wikipedia.org/wiki/List_of_tz_database_time_zones">the tz database</a>.</p>
|
||||
> Use a timezone as it appears in <a href="https://en.wikipedia.org/wiki/List_of_tz_database_time_zones">the tz database</a>.</p>
|
||||
<p><strong>Meshtastic</strong><br>
|
||||
For <code>meshtastic_lora_radio</code>, choose your radio from the supported hardware list.<br>
|
||||
For <code>meshtastic_lora_radio</code>`, choose your radio from the supported hardware list.<br>
|
||||
Options are:</p>
|
||||
<ul>
|
||||
<li><code>ebyte-e22-900m30sm</code></li>
|
||||
|
|
@ -50,19 +53,22 @@ Options are:</p>
|
|||
<li><code>ai-thinker-ra-01sh</code></li>
|
||||
<li><code>none</code> <em>(for simradio)</em></li>
|
||||
</ul>
|
||||
<p><strong>Important:</strong> You cannot set URL and security settings in the same operation - if you must set both, set the URL first, then edit the <code>femtofox-config.txt</code> file on the USB drive to remove the URL and add in your security settings.</p>
|
||||
<p>To add a <code>meshtastic_admin_key</code>, copy it from the app and add <code>base64:</code> to the beginning (<code>meshtastic_admin_key="base64:T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ="</code>).</p>
|
||||
<p>Clearing the <code>meshtastic_admin_key</code> list: The admin key list can contain up to three keys - <em>if more are added they will be ignored</em>. The USB configuration tool supports clearing the admin key list, after which you will need to re-add your admin key/s in a second operation. To clear the admin key list, enter <code>meshtastic_admin_key="0"</code>, without <code>base64:</code>.</p>
|
||||
<p><strong>Important:</strong> You cannot set URL and security settings in the same operation - if you must set both, set the URL first, then edit the <code>`femtofox-config.txt</code>` file on the USB drive to remove the URL and add in your security settings.</p>
|
||||
<p>To add a <code>meshtastic_admin_key</code>, copy it from the app and add <code>`base64:</code>` to the beginning (<code>meshtastic_admin_key="base64:T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ="</code>).</p>
|
||||
<p>Clearing the <code>meshtastic_admin_key</code>` list: The admin key list can contain up to three keys - <em>if more are added they will be ignored</em>. The USB configuration tool supports clearing the admin key list, after which you will need to re-add your admin key/s in a secondoperation. To clear the admin key list, enter <code>meshtastic_admin_key="0"</code>`, without <code>`base64:</code>.</p>
|
||||
</blockquote>
|
||||
<blockquote>
|
||||
<p>[!CAUTION]<br>
|
||||
Attempting to set wifi settings via USB configuration tool without a wifi adapter connected will lead to a 5 minute hang while the configuration tool runs - either disconnect and reconnect power or wait the full 5 minutes to to recover.</p>
|
||||
<p>`.
|
||||
|
||||
> [!CAUTION]<br>
|
||||
Attempting to set wifi settings via USB configuration tool without a wifi adapterconnected will lead to a 5 minute hang while the configuration tool runs - either disconnect and reconnect power or wait the full 5 minutes to to recover.</p>
|
||||
</blockquote>
|
||||
<p><strong>To apply your configuration, reboot the Femtofox with the USB drive plugged in. No other USB drives can be plugged in at the same time.</strong><br>
|
||||
A log (<code>femtofox-config.log</code>) is saved to <code>/home/femto</code> and the USB drive (except on NTFS, which is read only).<br>
|
||||
<p><strong>To apply your configuration, reboot the Femtofox with the USB drive plugged in. No other USB drives can be plugged in at the same time.</strong><br>**
|
||||
A log (<code>`femtofox-config.log</code>`) is saved to <code>`/home/femto</code> and the USB drive (except on NTFS, which is read only).<br>
|
||||
<br></p>
|
||||
<h3 id="boot-codes">Boot codes</h3>
|
||||
<p>When the Femtofox is finished booting, it will blink its User LED (see below) in a pattern which can be used to gather info on its status or help diagnose issues.<br>
|
||||
<p>
|
||||
When the Femtofox is finished booting, it will blink its User LED (see below) in a pattern which can be used to gather info on its status or help diagnose issues.<br>
|
||||
<img src="https://github.com/noon92/femtofox/blob/main/leds.png" alt="LEDs"></p>
|
||||
|
||||
<table>
|
||||
|
|
@ -77,43 +83,49 @@ A log (<code>femtofox-config.log</code>) is saved to <code>/home/femto</code> an
|
|||
<tbody>
|
||||
<tr>
|
||||
<td><center>⚠️<br>________________<br>1 very long blink, lasting 5 seconds</center></td>
|
||||
<td>Failed to mount USB drive. Ignoring.</td>
|
||||
<td><li>Invalid filesystem</li><li>Corrupted partition table</li><li>Defective USB drive</li><li>Defective USB OTG adapter</li></td>
|
||||
<td><li>Use a supported partition (FAT32, exFAT, NTFS, ext4)</li><li>Repair partition table</li><li>Try another USB drive</li><li>Try another USB OTG adapter</li></td>
|
||||
<td>| Failed to mount USB drive. Ignoring.</td>
|
||||
<td>| <li>Invalid filesystem</li><li>Corrupted partition table</li><li>Defective USB drive</li><li>Defective USB OTG adapter</li></td>
|
||||
<td> | <li>Use a supported partition (FAT32, exFAT, NTFS, ext4)</li><li>Repair partition table</li><li>Try anotheUSB drive</li><li>Try another USB OTG adapter</li></td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td><center>⚠️<br>_____ _____ _____<br>3 long blinks, each lasting 1.5 seconds</center></td>
|
||||
<td><center>⚠️<br>_ _ _____<br>3 long blinks, each lasting 1.5 seconds</center></td>
|
||||
<td>USB drive mounted successfully but femtofox-config.txt was not found. Ignoring.</td>
|
||||
<td>Config file missing.</td>
|
||||
<td>Create configuration file as described above.</td>
|
||||
<td>| Config file missing.</td>
|
||||
<td> | Create configuration file as described above.</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td><center>⚠️<br>_____ _____ _____ _____ _____<br>5 long blinks, each lasting 1.5 seconds</center></td>
|
||||
<td> <center>⚠️<br>____\_\_\_\_\_ ____\_\_\_\_\_ ____\_\_\_\_\_ ____\_\_\_\_\_ _____<br>5 long blinks, each lasting 1.5 seconds</center></td>
|
||||
<td>USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring.</td>
|
||||
<td>Configuration file improperly formatted or contains no data.</td>
|
||||
<td>Check configuration file contents as described above.</td>
|
||||
<td>| Configuration file improperly formatted or contains no data.</td>
|
||||
<td> | Check configuration file contents as described above.</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td><center>⚠️<br>___ ___ _ _ ___ ___ _ _<br>2 long blinks, each lasting 1 seconds, then 2 short blinks, each lasting 1/4 of a second. Repeats twice</center></td>
|
||||
<td> |
|
||||
|<center>⚠️<br>_ _ _ _ _ _ _<br>2 long blinks, each lasting 1 seconds, then 2 short blinks, each lasting 1/4 of a second. Repeats twice</center></td>
|
||||
<td>Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully.</td>
|
||||
<td><li>The error may be transient.</li><li>Configuration file may contain improper data.</li></td>
|
||||
<td><li>Try again.</li><li>Check configuration file contents as described above.</li><li>Check the log.<br><br>This pattern may flash before other patterns. The pattern will repeat once for each failed setting.</li></td>
|
||||
<td>| <li>The error may be transient.</li><li>Configuration file may contain improper data.</li></td>
|
||||
<td> | <li>Try again.</li><li>Check configuration file contents as described above.</li><li>Check the log.<br><br>This pattern may flash before other patterns. The pattern will repeat once for each failed setting.</li></td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td><center>✅<br>. . . . . . . . . .<br>10 very fast blinks, each lasting 1/8th of a second</center></td>
|
||||
<td>USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive.</td>
|
||||
<td>This does not mean that the information in the config file is correct - only that it was readable.<br>Note that the “success” boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully.</td>
|
||||
<td>|
|
||||
|<center>✅<br>. . . . . . . . . .<br>10 very fast blinks, each lasting 1/8th of a second</center></td>
|
||||
<td> | USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive.</td>
|
||||
<td> | This does not mean that the information in the config file is correct - only that it was readable.<br>Note that the “success boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully.</td>
|
||||
<td></td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td><center>✅<br>__ __ __ __ __<br>5 medium blinks, each lasting 0.5 seconds</center></td>
|
||||
<td><center>✅<br>__ _ __ __ __<br>5 medium blinks, each lasting 0.5 seconds</center></td>
|
||||
<td>Boot complete. Appears on every successful boot and always appears last.</td>
|
||||
<td></td>
|
||||
<td></td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table><blockquote>
|
||||
<p>[!NOTE]<br>
|
||||
Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the attempt to mount the USB drive failed, and that boot is complete.</p>
|
||||
<p>[!NOTE]>
|
||||
|
||||
> Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the attempt to mount the USB drive failed, and that boot is complete.</p>
|
||||
</blockquote>
|
||||
|
||||
<!--stackedit_data:
|
||||
eyJoaXN0b3J5IjpbLTE0MTQyNzcxNTddfQ==
|
||||
-->
|
||||
Loading…
Add table
Add a link
Reference in a new issue