diff --git a/usb_config.md b/usb_config.md index e84fd2e..e772e59 100644 --- a/usb_config.md +++ b/usb_config.md @@ -71,12 +71,12 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in ![LEDs](assets/images/leds.png) | LED blink pattern | Meaning | Possible causes | Solutions | |--|--|--|--| -|
⚠️
──────────
1 very long blink, lasting 5 seconds
| Failed to mount USB drive. Ignoring. | • Invalid filesystem
• Corrupted partition table
• Defective USB drive
• Defective USB OTG adapter | • Use a supported partition (FAT32, exFAT, NTFS, ext4)
• Repair partition table
• Try another USB drive
• Try another USB OTG adapter | +|
⚠️
**──────────**
1 very long blink, lasting 5 seconds
| Failed to mount USB drive. Ignoring. | • Invalid filesystem
• Corrupted partition table
• Defective USB drive
• Defective USB OTG adapter | • Use a supported partition (FAT32, exFAT, NTFS, ext4)
• Repair partition table
• Try another USB drive
• Try another USB OTG adapter | |
⚠️
**───   ───**
2 long blinks, each lasting 1.5 seconds
| femtofox-config.txt is configured to skip if log exists. | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt | -|
⚠️
**───   ───   ───   **
3 long blinks, each lasting 1.5 seconds
| USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. | -|
⚠️
**───   ───   ───   ───   ───   **
5 long blinks, each lasting 1.5 seconds
| USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. | -|
⚠️
\__\_ \__\_ \_ \_ \__\_ \__\_ \_ \_
2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. | • The error may be transient.
• Configuration file may contain improper data. | • Try again.
• Check configuration file contents as described above.
• Check the log.

This pattern may flash before other patterns. The pattern will repeat once for each failed setting. | -|
✅
. . . . . . . . . .
10 very fast blinks, each lasting 1/8th of a second
| USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.
Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. | | +|
⚠️
**───   ───   ───**
3 long blinks, each lasting 1.5 seconds
| USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. | +|
⚠️
**───   ───   ───   ───   ───**
5 long blinks, each lasting 1.5 seconds
| USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. | +|
⚠️
**──   ──   -   -**
2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. | • The error may be transient.
• Configuration file may contain improper data. | • Try again.
• Check configuration file contents as described above.
• Check the log.

This pattern may flash before other patterns. The pattern will repeat once for each failed setting. | +|
✅
.   .   .   .   .   .   .   .      .   
10 very fast blinks, each lasting 1/8th of a second
| USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.
Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. | | |
✅
\_\_ \_\_ \_\_ \_\_ \_\_
5 medium blinks, each lasting 0.5 seconds
| Boot complete. Appears on every successful boot and always appears last. | | \_\_  \_\_
5 medium blinks, each lasting 0.5 seconds | Boot complete. Appears on every successful boot and always appears last.| | | > \[!NOTE\] @@ -88,5 +88,5 @@ eyJoaXN0b3J5IjpbLTE5OTAxODA3OSwtMjYyOTMyNDldfQ== > \[!NOTE\] > Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete. \ No newline at end of file