From 7c1e49a0aedbe8b2cea84f72f9ac6ec1462ba3aa Mon Sep 17 00:00:00 2001
From: noon92 <40807970+noon92@users.noreply.github.com>
Date: Fri, 25 Oct 2024 18:39:54 +0300
Subject: [PATCH] Update README.md

---
 README.md | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/README.md b/README.md
index 17153ae..c028d8f 100644
--- a/README.md
+++ b/README.md
@@ -23,8 +23,8 @@ Three images are available:
 3. [An image preconfigured with the TC2-BBS for comms over USB.](https://drive.google.com/file/d/1FeKXmsZaS6a3FwgwfjkuimlVRJ-OS4HC/view?usp=drive_link) Note that this assumes the USB device is recognized as /dev/ttyACM0.
 
 # Installation
-1. Uncompress the 7z file - will require ~29gb of space. In windows, use (7-zip)[https://www.7-zip.org/].
-2. Flash the image to a reasonably fast Micro-SD card of at least 32gb in size using (Balena Etcher)[https://etcher.balena.io/] or your favorite flashing program. You will likely get a warning that the image appears to be invalid or has no partition table. This is normal.
+1. Uncompress the 7z file - will require ~29gb of space. In windows, use [7-zip](https://www.7-zip.org/).
+2. Flash the image to a reasonably fast Micro-SD card of at least 32gb in size using [Balena Etcher](https://etcher.balena.io/) or your favorite flashing program. You will likely get a warning that the image appears to be invalid or has no partition table. This is normal.
 3. Insert the microSD card into the Pico Mini.
 4. Connect Pico Mini to Meshtastic radio via pins or USB, depending on image flashed. If using pins - use pins 10 and 11 on the luckfox board.
 5. For the rak19007 (with the rak4631 daughter board):
@@ -44,7 +44,7 @@ Three images are available:
 9. If communications is via UART, you must bridge the grounds of the two boards.
 10. Supply power to the Pico Mini via pins or USB.
 11. It should Just Work.
-12. You can connect to the Luckfox via USB Ethernet adapter or via UART serial as described (here)[https://wiki.luckfox.com/Luckfox-Pico/Luckfox-Pico-RV1103/Luckfox-Pico-Login-UART/].
+12. You can connect to the Luckfox via USB Ethernet adapter or via UART serial as described [here](https://wiki.luckfox.com/Luckfox-Pico/Luckfox-Pico-RV1103/Luckfox-Pico-Login-UART/).
 
 Login for the "fresh" image is root:root or pico:luckfox.
 Login for the configured BBS images is bbs:mesh.