From 7fe502778b3d37f1bb82b6f9b7d41416fe91aed2 Mon Sep 17 00:00:00 2001 From: nagumii Date: Sat, 14 Dec 2024 22:54:31 +0200 Subject: [PATCH] remove old meshtasticd config location --- ...x_EByte-E22-900M30S_Ebyte-E22-900M22S.yaml | 16 -- .../femtofox_EByte-E22-900MM22S.yaml | 16 -- ...tofox_Heltec-HT-RA62_Seeed-WIO-SX1262.yaml | 14 -- ...eshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml | 13 -- meshtasticd/config.yaml | 163 ------------------ 5 files changed, 222 deletions(-) delete mode 100644 meshtasticd/available.d/femtofox_EByte-E22-900M30S_Ebyte-E22-900M22S.yaml delete mode 100644 meshtasticd/available.d/femtofox_EByte-E22-900MM22S.yaml delete mode 100644 meshtasticd/available.d/femtofox_Heltec-HT-RA62_Seeed-WIO-SX1262.yaml delete mode 100644 meshtasticd/available.d/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml delete mode 100644 meshtasticd/config.yaml diff --git a/meshtasticd/available.d/femtofox_EByte-E22-900M30S_Ebyte-E22-900M22S.yaml b/meshtasticd/available.d/femtofox_EByte-E22-900M30S_Ebyte-E22-900M22S.yaml deleted file mode 100644 index 6c88b1e..0000000 --- a/meshtasticd/available.d/femtofox_EByte-E22-900M30S_Ebyte-E22-900M22S.yaml +++ /dev/null @@ -1,16 +0,0 @@ ---- -Lora: -## Ebyte E22-900M30S, E22-900M22S with no external RF switching setup -## Will work with any module without RF switching, and with TCXO - Module: sx1262 - gpiochip: 1 # subtract 32 from the gpio numbers - DIO2_AS_RF_SWITCH: true - DIO3_TCXO_VOLTAGE: true - CS: 16 #pin6 / GPIO48 1C0 - IRQ: 23 #pin17 / GPIO55 1C7 - Busy: 22 #pin16 / GPIO54 1C6 - Reset: 25 #pin13 / GPIO57 1D1 - RXen: 24 #pin12 / GPIO56 1D0 - #TXen: bridge to DIO2 on E22 module - spidev: spidev0.0 - spiSpeed: 2000000 \ No newline at end of file diff --git a/meshtasticd/available.d/femtofox_EByte-E22-900MM22S.yaml b/meshtasticd/available.d/femtofox_EByte-E22-900MM22S.yaml deleted file mode 100644 index 451d5d3..0000000 --- a/meshtasticd/available.d/femtofox_EByte-E22-900MM22S.yaml +++ /dev/null @@ -1,16 +0,0 @@ ---- -Lora: -## Ebyte E22-900MM22S with no external RF switching setup -## Will work with any module without RF switching and no TCXO - Module: sx1262 - gpiochip: 1 # subtract 32 from the gpio numbers - DIO2_AS_RF_SWITCH: true - DIO3_TCXO_VOLTAGE: true - CS: 16 #pin6 / GPIO48 1C0 - IRQ: 23 #pin17 / GPIO55 1C7 - Busy: 22 #pin16 / GPIO54 1C6 - Reset: 25 #pin13 / GPIO57 1D1 - RXen: 24 #pin12 / GPIO56 1D0 - #TXen: bridge to DIO2 on E22 module - spidev: spidev0.0 - spiSpeed: 2000000 \ No newline at end of file diff --git a/meshtasticd/available.d/femtofox_Heltec-HT-RA62_Seeed-WIO-SX1262.yaml b/meshtasticd/available.d/femtofox_Heltec-HT-RA62_Seeed-WIO-SX1262.yaml deleted file mode 100644 index d5f02b4..0000000 --- a/meshtasticd/available.d/femtofox_Heltec-HT-RA62_Seeed-WIO-SX1262.yaml +++ /dev/null @@ -1,14 +0,0 @@ ---- -Lora: -## Heltec HT-RA62, Seeed WIO SX1262 -## Will work with any module with automatic RF switching, and with TCXO - Module: sx1262 - gpiochip: 1 # subtract 32 from the gpio numbers - DIO2_AS_RF_SWITCH: true - DIO3_TCXO_VOLTAGE: true - CS: 16 #pin6 (GPIO pin 48 1C0) - IRQ: 23 #pin17 (GPIO pin 55 1C7) - Reset: 25 #pin13 (GPIO pin 57 1D1) - Busy: 22 #pin16 (GPIO pin 54 1C6) - spidev: spidev0.0 #pins are (CS=6, CLK=7, MOSI=8, MISO=9) - spiSpeed: 2000000 \ No newline at end of file diff --git a/meshtasticd/available.d/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml b/meshtasticd/available.d/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml deleted file mode 100644 index 6eb194b..0000000 --- a/meshtasticd/available.d/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml +++ /dev/null @@ -1,13 +0,0 @@ ---- -Lora: -## Waveshare SX126X XXXM, AI Thinker RA-01SH -## Will work with any module with automatic RF switching, and with no TCXO - Module: sx1262 - gpiochip: 1 # subtract 32 from the gpio numbers - DIO2_AS_RF_SWITCH: true - CS: 16 #pin6 (GPIO pin 48 1C0) - IRQ: 23 #pin17 (GPIO pin 55 1C7) - Reset: 25 #pin13 (GPIO pin 57 1D1) - Busy: 22 #pin16 (GPIO pin 54 1C6) - spidev: spidev0.0 #pins are (CS=6, CLK=7, MOSI=8, MISO=9) - spiSpeed: 2000000 \ No newline at end of file diff --git a/meshtasticd/config.yaml b/meshtasticd/config.yaml deleted file mode 100644 index 407b720..0000000 --- a/meshtasticd/config.yaml +++ /dev/null @@ -1,163 +0,0 @@ -### Many device configs have been moved to /etc/meshtasticd/available.d -### To activate, simply copy or link the appropriate file into /etc/meshtasticd/config.d - -### Define your devices here using Broadcom pin numbering -### Uncomment the block that corresponds to your hardware -### Including the "Module:" line! ---- -Lora: - -# Module: sx1262 # Waveshare SX1302 LISTEN ONLY AT THIS TIME! -# CS: 7 -# IRQ: 17 -# Reset: 22 - -# Module: sx1262 # pinedio -# CS: 0 -# IRQ: 10 -# Busy: 11 -# DIO2_AS_RF_SWITCH: true -# spidev: spidev0.1 - -# Module: RF95 # Adafruit RFM9x -# Reset: 25 -# CS: 7 -# IRQ: 22 -# Busy: 23 - -# Module: RF95 # Elecrow Lora RFM95 IOT https://www.elecrow.com/lora-rfm95-iot-board-for-rpi.html -# Reset: 22 -# CS: 7 -# IRQ: 25 - -# Module: sx1280 # SX1280 -# CS: 21 -# IRQ: 16 -# Busy: 20 -# Reset: 18 - -# Module: sx1268 # SX1268-based modules, tested with Ebyte E22 400M33S -# CS: 21 -# IRQ: 16 -# Busy: 20 -# Reset: 18 -# TXen: 6 -# RXen: 12 -# DIO3_TCXO_VOLTAGE: true - -# DIO3_TCXO_VOLTAGE: true # the Waveshare Core1262 and others are known to need this setting - -# TXen: x # TX and RX enable pins -# RXen: x - -# ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341 - -# spiSpeed: 2000000 - -### Set gpio chip to use in /dev/. Defaults to 0. -### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4 -# gpiochip: 4 - -### Specify the SPI device to use in /dev/. Defaults to spidev0.0 -### Some devices, like the pinedio, may require spidev0.1 as a workaround. -# spidev: spidev0.0 - -### Define GPIO buttons here: - -GPIO: -# User: 6 - -### Define GPS - -GPS: -# SerialPath: /dev/ttyS0 - -### Specify I2C device, or leave blank for none - -I2C: -# I2CDevice: /dev/i2c-1 - -### Set up SPI displays here. Note that I2C displays are generally auto-detected. - -Display: - -### Waveshare 1.44inch LCD HAT -# Panel: ST7735S -# CS: 8 #Chip Select -# DC: 25 # Data/Command pin -# Backlight: 24 -# Width: 128 -# Height: 128 -# Reset: 27 -# OffsetX: 0 -# OffsetY: 0 - -### Adafruit PiTFT 2.8 TFT+Touchscreen -# Panel: ILI9341 -# CS: 8 -# DC: 25 -# Width: 240 -# Height: 320 -# Rotate: true - -### SHCHV 3.5 RPi TFT+Touchscreen -# Panel: ILI9486 -# spidev: spidev0.0 -# BusFrequency: 30000000 -# DC: 24 -# Reset: 25 -# Width: 320 -# Height: 480 -# OffsetRotate: 2 - -### TZT 2.0 Inch TFT Display ST7789V 240RGBx320 -# Panel: ST7789 -# spidev: spidev0.0 -# # CS: 8 # can be freely chosen -# BusFrequency: 80000000 -# DC: 24 # can be freely chosen -# Width: 320 -# Height: 240 -# Reset: 25 # can be freely chosen -# Rotate: true -# OffsetRotate: 1 -# Invert: true - -### You can also specify the spi device for the display to use -# spidev: spidev0.0 - -Touchscreen: -### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching. - -# Module: STMPE610 # Option 1 for Adafruit PiTFT 2.8 -# CS: 7 -# IRQ: 24 - -# Module: FT5x06 # Option 2 for Adafruit PiTFT 2.8 -# IRQ: 24 -# I2CAddr: 0x38 - -### You can also specify the spi device for the touchscreen to use -# spidev: spidev0.0 - - -Input: -### Configure device for direct keyboard input - -# KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd - -### - -Logging: - LogLevel: debug # debug, info, warn, error - TraceFile: /var/log/meshtasticd.json - AsciiLogs: true # default if not specified is !isatty() on stdout - -Webserver: - Port: 443 # Port for Webserver & Webservices - RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer - -General: - MaxNodes: 200 - MaxMessageQueue: 100 - ConfigDirectory: /etc/meshtasticd/config.d/ \ No newline at end of file