From 8abf8d9a561c044e4cec95f97dbd77f969fa7af4 Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Sat, 21 Dec 2024 21:02:29 +0200 Subject: [PATCH] usb_config.md updated from https://stackedit.io/ --- usb_config.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/usb_config.md b/usb_config.md index af9bf82..0faf57b 100644 --- a/usb_config.md +++ b/usb_config.md @@ -2,8 +2,6 @@ ## USB Configuration Tool To configure some Femtofox settings such as wifi, you can insert a USB flash drive containing a configuration file. The system will automatically recognize, mount and implement the settings you specify. -     **[Get an example USB configuration file here](assets/femtofox-config.txt)** - Configurable settings are: - Wifi SSID - Wifi PSK (password) @@ -17,7 +15,9 @@ Configurable settings are: - Security: [Legacy Admin Channel](https://meshtastic.org/docs/configuration/radio/security/#admin-channel-enabled) enable/disable ### Instructions -The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only - log will not be saved to drive) or ext4 partition. Add a file named `femtofox-config.txt` and whichever of the the following lines you want to set, keeping in mind this is CaSe sEnSiTiVe: +The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only - log will not be saved to drive) or ext4 partition. Add a file named `femtofox-config.txt` and whichever settings you would like to change (CaSe sEnSiTiVe). + +     **[Get an example USB configuration file here](assets/femtofox-config.txt)** ``` wifi_ssid="Your SSID name" wifi_psk="wifipassword" @@ -25,7 +25,7 @@ wifi_country="US" timezone="America/New_York" meshtastic_lora_radio="ebyte-e22-900m30s" meshtastic_url="https://meshtastic.org/e/#CgMSAQESCAgBOAFAA0gB" -meshtastic_admin_key="base64:T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ=" +meshtastic_admin_key="T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ=" meshtastic_legacy_admin="true" ``` > [!NOTE] @@ -76,5 +76,5 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in > [!NOTE] > Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the attempt to mount the USB drive failed, and that boot is complete. \ No newline at end of file