diff --git a/assets/femtofox-config.txt b/assets/femtofox-config.txt
index 01e4d3c..90b1b92 100644
--- a/assets/femtofox-config.txt
+++ b/assets/femtofox-config.txt
@@ -18,6 +18,10 @@
 ## Options are "enable" and "disable"
 #act_led="disable"
 
+### Software installation
+## Software package names are filenames (without .sh suffix) in /usr/local/bin/packages
+## Multiple packages can be installed by separating them with commas
+#software_install="packageA,packageB"
 
 ### Meshtastic settings
 
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/foxbuntu-release b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/foxbuntu-release
index 3f697f5..f2aa180 100644
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/foxbuntu-release
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/foxbuntu-release
@@ -1,6 +1,6 @@
 major=1
 minor=0
 patch=0
-hotfix=
+hotfix=RC3
 
 # major, minor and patch must be numbers and populated. hotfix must be letters and can be blank.
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-boot-complete.service b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-boot-complete.service
index 85e6d55..2e47bf2 100644
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-boot-complete.service
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-boot-complete.service
@@ -1,7 +1,7 @@
 [Unit]
 Description=Boot Complete
 DefaultDependencies=no
-After=multi-user.target
+After=multi-user.target femto-usb-config-tool.service
 
 [Service]
 ExecStart=/usr/local/bin/femto-boot-complete.sh
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-runonce.sh b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-runonce.sh
index d38262a..0968a57 100755
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-runonce.sh
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-runonce.sh
@@ -109,11 +109,11 @@ log_message "Enabling meshtasticd service"
 systemctl enable meshtasticd
 
 #generate SSH keys
-log_message "Generating new SSH encryption keys. This can take a couple minutes..."
+log_message "Generating new SSH encryption keys. This can take a few minutes..."
 femto-utils.sh -E
 
 #generate ttyd SSL keys
-log_message "Generating new Web Terminal (ttyd) SSL encryption keys. This can take a couple minutes..."
+log_message "Generating new Web Terminal (ttyd) SSL encryption keys. This can take a few minutes..."
 /usr/local/bin/packages/ttyd.sh -k
 log_message "Enabling Web Terminal (ttyd) service..."
 systemctl enable ttyd
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-set-time.sh b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-set-time.sh
index 51b29d8..2ca6bd8 100755
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-set-time.sh
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-set-time.sh
@@ -23,6 +23,19 @@ set_timezone() {
   echo "Setting time zone..."
   ln -f -s /usr/share/zoneinfo/$1 /etc/localtime >/dev/null 2>&1
   dpkg-reconfigure --frontend noninteractive tzdata >/dev/null 2>&1
+  if [ ! -f /usr/share/zoneinfo/$1 >/dev/null 2>&1 ]; then
+    echo -e "Invalid timezone: $1"
+    return 1
+  fi
+  desired_offset=$(TZ=$1 date +"%:z")
+  current_offset=$(date +"%:z")
+  if [ "$desired_offset" != "$current_offset" ]; then
+    echo -e "FAILED to set timezone to $1. Expected GMT offset: $desired_offset, but got: $current_offset"
+    return 1
+  else
+    echo "Set timezone to $current_offset"
+    return 0
+  fi
 }
 
 set_timestamp() {
@@ -46,9 +59,11 @@ while getopts ":t:T:h" opt; do
   case ${opt} in
     t)  # Option -t (timezone)
       set_timezone "$OPTARG"
+      [ $? -eq 1 ] && exit 1
     ;;
     T)  # Option -t (timestamp)
       set_timestamp "$OPTARG"
+      [ $? -eq 1 ] && exit 1 || exit 0
     ;;
     h)  # Option -h (help)
       echo -e "$help"
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-usb-config-tool.sh b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-usb-config-tool.sh
index 5bf0574..c9c8cc1 100755
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-usb-config-tool.sh
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-usb-config-tool.sh
@@ -14,12 +14,21 @@ log_message() {
   echo "$(date +"%Y-%m-%d %H:%M:%S") $1" >> /tmp/femtofox-config.log
 }
 
-if grep -qE '^first_boot=true' /etc/femto.conf; then
+if systemctl is-enabled femto-runonce &>/dev/null; then
   log_message "First boot, skipping USB Configuration Tool."
   exit 0
 fi
 
 exit_script() {
+  if [[ -n "$partial_failure" ]]; then
+    log_message "\033[0;31mPartial failure in usb-config-tool...\033[0m"
+    for _ in {1..2}; do #boot code
+      blink "1" && sleep 0.5
+    done
+    for _ in {1..2}; do #boot code
+      blink "0.25" && sleep 0.5
+    done
+  fi
   if [ ! -z "$usb_path" ]; then #if usb path is populated
     if ! df -T /mnt/usb 2>/dev/null | grep -qw 'ntfs'; then
       log_message "USB configuration script complete. Copying femtofox-config.log to USB drive."
@@ -130,8 +139,9 @@ if [ -f "$mount_point/femtofox-config.txt" ]; then
       meshtastic_private_key) meshtastic_private_key=$(escape_sed "$value") ;;
       meshtastic_admin_key) meshtastic_admin_key=$(escape_sed "$value") ;;
       dont_run_if_log_exists) dont_run_if_log_exists=$(escape_sed "$value") ;;
+      software_install) software_install=$(escape_sed "$value") ;;
     esac
-  done < <(grep -E '^(act_led|wifi_ssid|wifi_psk|wifi_country|meshtastic_lora_radio|timezone|meshtastic_url|meshtastic_legacy_admin|meshtastic_public_key|meshtastic_private_key|meshtastic_admin_key|dont_run_if_log_exists)=' "$usb_config")
+  done < <(grep -E '^(act_led|wifi_ssid|wifi_psk|wifi_country|meshtastic_lora_radio|timezone|meshtastic_url|meshtastic_legacy_admin|meshtastic_public_key|meshtastic_private_key|meshtastic_admin_key|dont_run_if_log_exists|software_install)=' "$usb_config")
   
   # Check if the log exits and if the dont_run_if_log_exists line is set in the script
   if $log_exists && [[ $dont_run_if_log_exists = "true" ]]; then
@@ -173,6 +183,13 @@ if [ -f "$mount_point/femtofox-config.txt" ]; then
     found_config="true"
     update_wifi="true"
   fi
+
+  if [ "$update_wifi" = true ]; then #if wifi config found, restart wifi
+    log_message "Making changes to wifi settings and restarting wifi."
+    wifi_command="$wifi_command -r"
+    eval $wifi_command 2>&1 | tee -a /tmp/femtofox-config.log
+    log_message "wpa_supplicant.conf updated and wifi restarted. Enabling Meshtastic wifi setting."
+  fi
   
   #get meshtastic_lora_radio model, if specified, and copy appropriate yaml to /etc/meshtasticd/config.d/
   if [[ -n "$meshtastic_lora_radio" ]]; then
@@ -214,12 +231,18 @@ if [ -f "$mount_point/femtofox-config.txt" ]; then
         radio="none"
       ;;
       *)
-        log_message "Invalid LoRa radio name: $meshtastic_lora_radio, ignoring."
+        log_message "\033[0;31mInvalid LoRa radio name: $meshtastic_lora_radio, ignoring.\033[0m"
+        partial_failure=true
       ;;
     esac
     if [[ -n "$radio" ]]; then # if a radio was found
       femto-meshtasticd-config.sh -l "$radio" -s 2>&1 | tee -a /tmp/femtofox-config.log # set the radio and restart the service
-      log_message "Set LoRa radio to $meshtastic_lora_radio, restarting Meshtasticd."
+      if [ $? -eq 0 ]; then
+        log_message "Set LoRa radio to $meshtastic_lora_radio, restarting Meshtasticd."
+      else
+        log_message "\033[0;31mSeting LoRa radio to $meshtastic_lora_radio FAILED, restarting Meshtasticd.\033[0m" | tee -a /tmp/femtofox-config.log
+        partial_failure=true
+      fi
     fi
   fi
   
@@ -227,6 +250,10 @@ if [ -f "$mount_point/femtofox-config.txt" ]; then
     timezone=$(echo "$timezone" | sed 's/\\//g')
     log_message "Updating system timezone to $timezone."
     femto-set-time.sh -t "$timezone"
+    if [ $? -eq 1 ]; then
+      partial_failure=true
+      log_message "\033[0;31mSeting timezone to $timezone FAILED.\033[0m" | tee -a /tmp/femtofox-config.log
+    fi
     found_config="true"
   fi
   
@@ -274,25 +301,62 @@ if [ -f "$mount_point/femtofox-config.txt" ]; then
   while IFS='=' read -r key value; do
     log_message "Meshtastic CLI command found."
     femto-meshtasticd-config.sh -m "$value" 3 "Meshtastic CLI command" 2>&1 | tee -a /tmp/femtofox-config.log
+    if [ $? -eq 1 ]; then
+      partial_failure=true
+      log_message "\033[0;31mMeshtastic CLI command \`meshtastic --host $value\` FAILED.\033[0m" | tee -a /tmp/femtofox-config.log
+    fi
     found_config=true
   done < <(grep '^meshtastic_cli=' "$usb_config" | sed -E 's/^meshtastic_cli=["]?(.*[^"])["]?$/meshtastic_cli=\1/')
 
-  if [ "$found_config" = true ]; then #if we found a config file containing valid data
-    if [ "$update_wifi" = true ]; then #if wifi config found, restart wifi
-      log_message "Making changes to wifi settings and restarting wifi."
-      wifi_command="$wifi_command -r"
-      eval $wifi_command 2>&1 | tee -a /tmp/femtofox-config.log
-      log_message "wpa_supplicant.conf updated and wifi restarted. Enabling Meshtastic wifi setting."
+  # install software packages from software_install=
+  package_dir="/usr/local/bin/packages"
+  export HOME=/root
+  IFS=',' read -ra packages <<< "$software_install"
+  for package in "${packages[@]}"; do
+    if [[ -f "/usr/local/bin/packages/${package}.sh" ]]; then
+      found_config=true
+      log_message "Installing $($package_dir/${package}.sh -N) in non-interactive mode..." | tee -a /tmp/femtofox-config.log
+      for i in {1..5}; do
+        set -o pipefail
+        $package_dir/${package}.sh -xi | tee -a /tmp/femtofox-config.log
+        last_install_attempt_state=${PIPESTATUS[0]}
+        set +o pipefail
+        if [ $last_install_attempt_state -eq 0 ]; then
+          log_message "\033[0;32mInstallation of $($package_dir/${package}.sh -N) successful!\033[0m"
+          break
+        fi
+        [ $i = 5 ] && log_message "Installation failed... Is internet connected?" && break
+        log_message "Installation failed ($((i+1))/5). Retrying..."
+        sleep 4
+      done
+      if [ $last_install_attempt_state -ne 0 ]; then
+        log_message "\033[0;31mInstallation of $($package_dir/${package}.sh -N) unsuccessful!\033[0m"
+        partial_failure=true
+      fi
+    else
+      log_message "\033[0;31mSoftware package $package_dir/${package}.sh does not exist, ignoring...\033[0m"
+      partial_failure=true
     fi
+  done
+
+  if [ "$found_config" = true ]; then #if we found a config file containing valid data
     
     if [ "$meshtastic_url" != "" ]; then
       log_message "Connecting to Meshtastic radio and submitting $meshtastic_url"
       femto-meshtasticd-config.sh -q "$meshtastic_url" 2>&1 | tee -a /tmp/femtofox-config.log
+      if [ $? -eq 1 ]; then
+        partial_failure=true
+        log_message "\033[0;31mSetting Meshtastic URL to $meshtastic_url FAILED.\033[0m" | tee -a /tmp/femtofox-config.log
+      fi
     fi
     
     if [ "$meshtastic_security_command" != "femto-meshtasticd-config.sh" ]; then
       log_message "Connecting to Meshtastic radio and submitting $meshtastic_security_command"
       eval "$meshtastic_security_command" 2>&1 | tee -a /tmp/femtofox-config.log
+      if [ $? -eq 1 ]; then
+        partial_failure=true
+        log_message "\033[0;31mSetting Meshtastic security settings FAILED.\033[0m" | tee -a /tmp/femtofox-config.log
+      fi
     fi
     
     for _ in {1..10}; do #do our successful config boot code
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-utils.sh b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-utils.sh
index ad3fe08..2a0cb78 100755
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-utils.sh
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-utils.sh
@@ -92,10 +92,11 @@ Mnted drives:$mounted_drives"
 }
 
 os_info() {
-  local os_version="Foxbuntu v$(grep -oP 'major=\K[0-9]+' /etc/foxbuntu-release).$(grep -oP 'minor=\K[0-9]+' /etc/foxbuntu-release)$(output=$(grep -o 'patch=[1-9][0-9]*' /etc/foxbuntu-release | cut -d= -f2) && [ -n "$output" ] && echo ".$output")$(grep -oP 'hotfix=\K[a-z]+' /etc/foxbuntu-release) ($(lsb_release -d | awk -F'\t' '{print $2}') $(lsb_release -c | awk -F'\t' '{print $2}'))"
+  local os_version="$(femto-utils.sh -v) ($(lsb_release -d | awk -F'\t' '{print $2}') $(lsb_release -c | awk -F'\t' '{print $2}'))"
   local system_uptime="$(uptime -p | awk '{$1=""; print $0}' | sed -e 's/ day\b/d/g' -e 's/ hour\b/h/g' -e 's/ hours\b/h/g' -e 's/ minute\b/m/g' -e 's/ minutes\b/m/g' | sed 's/,//g')"
   local kernel_active_modules="$(lsmod | awk 'NR>1 {print $1}' | tr '\n' ' ' && echo)"
   local kernel_boot_modules="$(modules=$(sed -n '6,$p' /etc/modules | sed ':a;N;$!ba;s/\n/, /g;s/, $//'); [ -z "$modules" ] && echo "none" || echo "$modules")"
+  local kernel_modules_blacklist="$(femto-kernel-modules.sh -y | sed 's/\x1B\[[0-9;]*m//g')" #remove underline
   local ttyd_enabled="$(femto-utils.sh -C "ttyd")"
   local logging_enabled="$(logging "check" | sed 's/\x1b\[[0-9;]*m//g')"
   local act_led="$(femto-utils.sh -a "check" | sed -r 's/\x1B\[[0-9;]*[mK]//g')" #remove color from output
@@ -107,6 +108,7 @@ Uptime:$system_uptime\n\
 System time:$(date)\n\
 K mods active:$kernel_active_modules\n\
 K boot mods:$kernel_boot_modules\n\
+K mod blcklst: $kernel_modules_blacklist
 Web terminal:$ttyd_enabled\n\
 Logging:$logging_enabled\n\
 Activity LED:$act_led"
@@ -284,7 +286,7 @@ while getopts ":harsl:ipcnoSEC:R:v" opt; do
       replace_colors "$OPTARG"
     ;;
     v) # get foxbuntu version)
-      echo "Foxbuntu v$(grep -oP 'major=\K[0-9]+' /etc/foxbuntu-release).$(grep -oP 'minor=\K[0-9]+' /etc/foxbuntu-release).$(grep -oP 'patch=\K[0-9]+' /etc/foxbuntu-release)$(grep -oP 'hotfix=\K[a-z]+' /etc/foxbuntu-release)"
+      echo "Foxbuntu v$(grep -oP 'major=\K[0-9]+' /etc/foxbuntu-release).$(grep -oP 'minor=\K[0-9]+' /etc/foxbuntu-release).$(grep -oP 'patch=\K[0-9]+' /etc/foxbuntu-release)$(grep -oP 'hotfix=\K\S+' /etc/foxbuntu-release)"
     ;;
     \?) # Unknown argument)
       echo -e "Unknown argument $1.\n$help"