diff --git a/Getting_started.md b/Getting_started.md index 6e31ede..bd5ec34 100644 --- a/Getting_started.md +++ b/Getting_started.md @@ -32,9 +32,9 @@ If you require a large quantity of Femtofox boards, please get in touch. ### Operating System 1. Download the latest image of Foxbuntu from the releases [https://github.com/femtofox/Femtofox/releases/] and extract from the 7z file with [7z program](https://www.7-zip.org/) or suitable alternative. - 2. Use an image flashing tool such as [Balena Etcher] to flash the image to a suitable SD card (see [supported hardware]). - Note that the image will not appear bootable to Etcher, but will be functional in use. - 3. Insert the SD card into the reader of the Femtofox + 2. Use an image flashing tool such as [Balena Etcher](https://www.balena.io/etcher) to flash the image to a suitable SD card (see [supported hardware](./supported_hardware.md)). + Note: the image will not appear bootable to Etcher, but will be functional in use. + 3. Insert the SD card into the reader of the Femtofox. ### Initial Configuration - Suggested Workflow Foxbuntu is ready to operate almost from the first boot. The settings can be configured using one of the following methods: @@ -72,5 +72,5 @@ Foxbuntu, Meshtasticd and the mesh applications can be updated as using the `Fem \ No newline at end of file