From 9870a91996fe017aeadfb3fa9cce0a8eda5911dc Mon Sep 17 00:00:00 2001 From: Tom <116762865+Nestpebble@users.noreply.github.com> Date: Mon, 3 Feb 2025 00:19:46 +0000 Subject: [PATCH] Update README.md --- README.md | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/README.md b/README.md index 962b7a2..a9de711 100644 --- a/README.md +++ b/README.md @@ -42,17 +42,6 @@ The Luckfox Pico Mini is the postage stamp sized heart of the Femtofox - a compa The preconfigured images will reboot every 24 hours. If the internal clock is accurate, this will be at 3am. Reboot timing is set in `crontab`. To keep accurate time, an RTC module can be installed (see [supported hardware](supported_hardware.md)) or internet connectivity can be utilized for NTP via [Chrony](https://chrony-project.org/). -### [Supported hardware - click here](supported_hardware.md) - -### Networking -There are four methods to get online: -1. Ethernet over USB - most adapters should be supported, but I've only tested the RTL8152 chipset. -2. USB wifi (see [supported hardware](supported_hardware.md)). -3. Preconfigured Ubuntu images: ethernet via the castellated pins at the bottom of the board. See pinout at the bottom of this readme. -4. RDNIS via usb - [see this guide](https://web.archive.org/web/20241006173648/https://wiki.luckfox.com/Luckfox-Pico/Luckfox-Pico-Network-Sharing-1/). Note that in the preconfigured images USB is set to host mode, so you'll have to switch back to peripheral with `sudo luckfox-config`. This is not really recommended, but can be used in a pinch. - -### [Installation guide](foxbuntu_install.md) - > [!NOTE] > The information on this page is given without warranty or guarantee. Links to vendors of products are for informational purposes only. > Meshtastic® is a registered trademark of Meshtastic LLC. Meshtastic software components are released under various licenses, see GitHub for details. No warranty is provided - use at your own risk.