From a97ebdfc181bb32827bb33dd778c2eb6bf468073 Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Mon, 6 Jan 2025 18:33:47 +0200 Subject: [PATCH] usb_config.md updated from https://stackedit.io/ --- usb_config.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/usb_config.md b/usb_config.md index c5696c2..5b1705b 100644 --- a/usb_config.md +++ b/usb_config.md @@ -64,16 +64,16 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in | LED blink pattern | Meaning | Possible causes | Solutions | |--|--|--|--| |
⚠️
________________
1 very long blink, lasting 5 seconds| Failed to mount USB drive. Ignoring.|
  • Invalid filesystem
  • Corrupted partition table
  • Defective USB drive
  • Defective USB OTG adapter |
  • Use a supported partition (FAT32, exFAT, NTFS, ext4)
  • Repair partition table
  • Try another USB drive
  • Try another USB OTG adapter | -|
    ⚠️
    \_\_\_\_\_  \_\_\_\_\_
    3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring.| Config file missing. | Create configuration file as described above. | -|
    ⚠️
    \_\_\_\_\_  \_\_\_\_\_  \_\_\_\_\_
    2 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring.| Config file missing. | Create configuration file as described above. | +|
    ⚠️
    \_\_\_\_\_  \_\_\_\_\_
    2 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt contains the `dont_run_config_if_log_exists` line and a log is present on the USB drive... Ignoring.| Config file missing. | Create configuration file as described above. | +|
    ⚠️
    \_\_\_\_\_  \_\_\_\_\_  \_\_\_\_\_
    3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring.| Config file missing. | Create configuration file as described above. | |
    ⚠️
    \_\_\_\_\_  \_\_\_\_\_  \_\_\_\_\_  \_\_\_\_\_  \_\_\_\_\_
    5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring.| Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. | -|
    ⚠️
    \_\_\_  \_\_\_  \_  \_  \_\_\_  \_\_\_  \_  \_
    2 long blinks, each lasting 1 seconds, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully.|
  • The error may be transient.
  • Configuration file may contain improper data. |
  • Try again.
  • Check configuration file contents as described above.
  • Check the log.

    This pattern may flash before other patterns. The pattern will repeat once for each failed setting.| +|
    ⚠️
    \_\_\_  \_\_\_  \_  \_  \_\_\_  \_\_\_  \_  \_
    2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully.|
  • The error may be transient.
  • Configuration file may contain improper data. |
  • Try again.
  • Check configuration file contents as described above.
  • Check the log.

    This pattern may flash before other patterns. The pattern will repeat once for each failed setting.| |
    ✅
    . . . . . . . . . .
    10 very fast blinks, each lasting 1/8th of a second | USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.
    Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully.| |
    ✅
    \_\_  \_\_  \_\_  \_\_  \_\_
    5 medium blinks, each lasting 0.5 seconds | Boot complete. Appears on every successful boot and always appears last.| | | > [!NOTE] > Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete. \ No newline at end of file