From a9f3de3006715ab814653a04ad6d43b2dae75b1b Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Sun, 22 Dec 2024 18:21:28 +0200 Subject: [PATCH] README.md updated from https://stackedit.io/ --- README.md | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/README.md b/README.md index 15f14a4..0b3a697 100644 --- a/README.md +++ b/README.md @@ -46,12 +46,7 @@ There are four methods to get online: 3. Preconfigured Ubuntu images: ethernet via the castellated pins at the bottom of the board. See pinout at the bottom of this readme. 4. RDNIS via usb - [see this guide](https://web.archive.org/web/20241006173648/https://wiki.luckfox.com/Luckfox-Pico/Luckfox-Pico-Network-Sharing-1/). Note that in the preconfigured images USB is set to host mode, so you'll have to switch back to peripheral with `sudo luckfox-config`. This is not really recommended, but can be used in a pinch. -### Installation - connection to Meshtastic node via UART or USB: - -1. Download the most recent OS image in [releases](https://github.com/noon92/femtofox/releases). -2. Flash the image your MicroSD card using [Balena Etcher](https://etcher.balena.io/) or your favorite flashing program. You will likely get a warning that the image appears to be invalid or has no partition table. This is normal. -3. Insert the microSD card into the Luckfox Pico Mini. -4. Configure the system with a USB drive as described in [USB Configuration Tool](usb_config.md). +### [Installation - connection to Meshtastic node via UART or USB](foxbuntu_install.md) ### Pinout: |Pin #|Pin ID |Function |Luckfox |Pin #|Pin ID |Function |