From b9b07a4e82321b61562bbdcdf4811a944abd031a Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Sun, 22 Dec 2024 18:20:50 +0200 Subject: [PATCH] foxbuntu_install.md updated from https://stackedit.io/ --- foxbuntu_install.md | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/foxbuntu_install.md b/foxbuntu_install.md index 9b90ec4..eeb90d8 100644 --- a/foxbuntu_install.md +++ b/foxbuntu_install.md @@ -1 +1,21 @@ -## Installation instructions for Foxbuntu +## Requirements for installing Foxbuntu +To install Foxbuntu, you'll need the following: +1. microSD card. You can select one from [Supported Hardware](supported_hardware.md), but any card over 8gb and supporting UHS-I *should* work. +2. microSD card reader for your PC. +3. USB OTG adapter. +4. USB flash drive. +5. A Femtofox. + +## Installation instructions +1. Download the latest [stable Foxbuntu release.](https://github.com/noon92/femtofox/releases). At the bottom of the release, click the .7z file to download. +2. Flash the image your MicroSD card using [Balena Etcher](https://etcher.balena.io/) or your favorite flashing program. You will likely get a warning that the image appears to be invalid or has no partition table. This is normal. +3. Insert the microSD card into the Luckfox Pico Mini. + * Optional: attach a USB to serial adapter to the Femtofox via the TX2 and RX2 pins for debug console. Remember bridge grounds! +4. Following the instructions on the [USB Configuration Tool](usb_config.md) page, prepare your USB flash drive with your desired settings. +5. Using your USB OTG adapter, plug the USB flash drive into the Luckfox Pico Mini's USB port. +6. Give power to the Femtofox. +7. The Femtofox will perform its first boot. This can take up to 5 minutes. When boot is complete, the USR LED will blink 5 times, 1/2 a second each. At this point, Meshtastic should be running and if you plug in a wifi adapter you should have network. + * Optional: plug an RJ45 cable in to the ethernet port, if you have one installed. +8. To connect to your Femtofox via SSH, open [PuTTY](https://www.putty.org/) or your favorite SSH client and connect to your Femtofox via `femtofox.local` or its IP (check your router). + * Username: `femto` + * Password: `fox`