usb_config.md updated from https://stackedit.io/

This commit is contained in:
noon92 2025-01-24 18:24:31 +02:00
parent a1c3209ab5
commit b9c7b29fc8

View file

@ -1,26 +1,29 @@
## USB Configuration Tool
To configure some Femtofox settings such as wifi, you can insert a USB flash drive containing a configuration file. On boot, the system will automatically recognize, mount and implement the settings you specify. The tool can also be run from the `femto-config` tool, in the `Utilities` menu.
Configurable settings are:
- Wifi SSID
- Wifi PSK (password)
- Wifi country
- Timezone
- Activity LED (blinky light - disable for minor power savings)
- Meshtastic:
- LoRa radio model
- [URL](https://meshtastic.org/docs/software/python/cli/#--seturl-seturl) (used to configure LoRa settings and channels)
- Security: public key
- Security: private key
- Security: Add Admin Key
- Security: Clear Admin Key List
- Security: [Legacy Admin Channel](https://meshtastic.org/docs/configuration/radio/security/#admin-channel-enabled) enable/disable
- Wifi PSK (password)
- Wifi country
- Timezone
- Activity LED (blinky light - disable for minor power savings)
- Meshtastic:
- LoRa radio model
- [URL](https://meshtastic.org/docs/software/python/cli/#--seturl-seturl) (used to configure LoRa settings and channels)
- Security: public key
- Security: private key
- Security: Add Admin Key
- Security: Clear Admin Key List
- Security: [Legacy Admin Channel](https://meshtastic.org/docs/configuration/radio/security/#admin-channel-enabled) enable/disable
### Instructions
The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only - log will not be saved to drive) or ext4 partition. Add a file named `femtofox-config.txt` and whichever settings you would like to change (CaSe sEnSiTiVe).
<a href download="assets/femtofox-config.txt">[Get an example USB configuration file here](assets/femtofox-config.txt)
     <a href download="assets/femtofox-config.txt">[**Get an example USB configuration file here**](assets/femtofox-config.txt)</a>
```
wifi_ssid="Your SSID name"
wifi_psk="wifipassword"
@ -35,50 +38,146 @@ meshtastic_admin_key="XX="
meshtastic_legacy_admin="true"
dont_run_if_log_exists="true"
```
> [!NOTE]
> \[!NOTE\]
> Enter as many or as few settings as you like.
>
> For `wifi_country`, insert your country's [ISO/IEC alpha2 two letter country code](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2#Officially_assigned_code_elements) (such as US, GB, DE, IN, etc.) in capital letters.
>
> Use a timezone as it appears in [the tz database](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones).
>
> **Meshtastic**
>   **Meshtastic**
> For `meshtastic_lora_radio`, choose your radio from the supported hardware list.
> Options are:
> `ebyte-e22-900m30s`
> `ebyte-e22-900m22s`
> `ebyte-e80-900m22s` (experimental)
> `heltec-ht-ra62`
> `seeed-wio-sx1262`
> `waveshare-sx126x-xxxm`
> `ai-thinker-ra-01sh`
> `sx1262_tcxo` (for Ebyte E22-900M30SM, Ebyte E22-900M22S, Heltec HT-RA62, Seeed Wio SX1262)
> `sx1262_xtal` (for AiThinker RA01SH, and Waveshare Pi hat)
> `lr1121_tcxo` (experimental, for Ebyte E80-900M2213S)
> `none` (for simulated radio)
>
> Clearing the `meshtastic_admin_key` list: The admin key list can contain up to three keys - if more are added they will be ignored. The USB configuration tool supports clearing the admin key list, after which you will need to re-add your admin key/s in a second operation. To clear the admin key list, enter `meshtastic_admin_key="clear"`.
> - `ebyte-e22-900m30s`
> - `ebyte-e22-900m22s`
> - `ebyte-e80-900m22s` _(experimental)_
> - `heltec-ht-ra62`
> - `seeed-wio-sx1262`
> - `waveshare-sx126x-xxxm`
> - `ai-thinker-ra-01sh`
> - `sx1262_tcxo` _(for Ebyte E22-900M30SM, Ebyte E22-900M22S, Heltec HT-RA62, Seeed Wio SX1262)_
> - `sx1262_xtal` _(for AiThinker RA01SH, and Waveshare Pi hat)_
> - `lr1121_tcxo` _(experimental, for Ebyte E80-900M2213S)_
> - `none` _(for simulated radio)_
>
> Clearing the `meshtastic_admin_key` list: The admin key list can contain up to three keys - _if more are added they will be ignored_. The USB configuration tool supports clearing the admin key list, after which you will need to re-add your admin key/s in a second operation. To clear the admin key list, enter `meshtastic_admin_key="clear"`.
> [!NOTE]
> \[!NOTE\]
> `dont_run_if_log_exists="true"` will prevent the USB configuration tool from working if there's a log present on the USB drive, indicating it has already been run. There is also an LED boot code for this, described below.
**To apply your configuration, reboot the Femtofox with the USB drive plugged in, or run `sudo femto-config` - `Utilites` - `Run USB configuration tool`. No other USB drives can be plugged in at the same time.**
**To apply your configuration, reboot the Femtofox with the USB drive plugged in, or run `sudo femto-config` -&gt; `Utilites` -&gt; `Run USB configuration tool`. No other USB drives can be plugged in at the same time.**
A log (`femtofox-config.log`) is saved to `/home/femto` and the USB drive (except on NTFS, which is read only).
<br>
### Boot codes
When the Femtofox is finished booting, it will blink its User LED (see below) in a pattern which can be used to gather info on its status or help diagnose issues.
![LEDs](assets/images/leds.png)
| LED blink pattern |
|<center>⚠️<br><br>1 very long blink, lasting 5 seconds | <li>Use a supported partition (FAT32, exFAT, NTFS, ext4)<>Repair partition table<>Try another USB drive<>Try another USB OTG adapter |
|<center>⚠️<br>nbspnbsp<br> long blinks, each lasting 1.5 seconds | femtofox-config.txt is configured to skip if log exists. | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt |
|<center>⚠️<br>\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_<br>3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring.| Config file missing. | Create configuration file as described above. |
|<center>⚠️<br>\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_<br>5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring.| Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. |
|<center>⚠️<br>\_\_\_&nbsp;&nbsp;\_\_\_&nbsp;&nbsp;\_&nbsp;&nbsp;\_&nbsp;&nbsp;\_\_\_&nbsp;&nbsp;\_\_\_&nbsp;&nbsp;\_&nbsp;&nbsp;\_<br>2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully.| <li>The error may be transient.<li>Configuration file may contain improper data. | <li>Try again.<li>Check configuration file contents as described above.<li>Check the log.<br><br>This pattern may flash before other patterns. The pattern will repeat once for each failed setting.|
|<center>✅<br>. . . . . . . . . .<br>10 very fast blinks, each lasting 1/8th of a second | USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.<br>Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully.|
|<center>✅<br>\_\_&nbsp;&nbsp;\_\_&nbsp;&nbsp;\_\_&nbsp;&nbsp;\_\_&nbsp;&nbsp;\_\_<br>5 medium blinks, each lasting 0.5 seconds | Boot complete. Appears on every successful boot and always appears last.| | |
> [!NOTE]
| LED blink pattern | Meaning | Possible causes | Solutions |
| ---------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| <center>⚠️<br>**──────────**<br>1 very long blink, lasting 5 seconds | Failed to mount USB drive. Ignoring. | <li>Invalid filesystem<li>Corrupted partition table<li>Defective USB drive<li>Defective USB OTG adapter | <li>Use a supported partition (FAT32, exFAT, NTFS, ext4)<li>Repair partition table<li>Try another USB drive<li>Try another USB OTG adapter |
| <center>⚠️<br>**───&nbsp;&nbsp;&nbsp;───**<br>2 long blinks, each lasting 1.5 seconds | femtofox-config.txt is configured to skip if log exists. | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB driver><li>Remove `dont_run_if_log_exists` line from femtofox-config.txt |
| <center>⚠️<br>**───&nbsp;&nbsp;&nbsp;───&nbsp;&nbsp;&nbsp;───**<br>3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. |
| <center>⚠️<br>**───&nbsp;&nbsp;&nbsp;───&nbsp;&nbsp;&nbsp;───&nbsp;&nbsp;&nbsp;───&nbsp;&nbsp;&nbsp;───**<br>5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. |
| <center>⚠️<br>**──&nbsp;&nbsp;&nbsp;──&nbsp;&nbsp;&nbsp;-&nbsp;&nbsp;&nbsp;-**<br>2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. | <li>The error may be transient.<li>Configuration file may contain improper data. | <li>Try again.<li>Check configuration file contents as described above.<li>Check the log.<br><br>This pattern may flash before other patterns. The pattern will repeat once for each failed setting. |
| <p align="center">✅<br>**. . . . . . . . . .**<br>10 very fast blinks, each lasting 1/8th of a second</br> | USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.<br>Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. | |
| <center>✅<br>**─&nbsp;&nbsp;&nbsp;─&nbsp;&nbsp;&nbsp;─&nbsp;&nbsp;&nbsp;─&nbsp;&nbsp;&nbsp;─**<br>5 medium blinks, each lasting 0.5 seconds | Boot complete. Appears on every successful boot and always appears last. | | |
> \[!NOTE\]
> Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete.
## USB Configuration Tool
To configure some Femtofox settings such as wifi, you can insert a USB flash drive containing a configuration file. On boot, the system will automatically recognize, mount and implement the settings you specify. The tool can also be run from the `femto-config` tool, in the `Utilities` menu.
Configurable settings are:
- Wifi SSID
- Wifi PSK (password)
- Wifi country
- Timezone
- Activity LED (blinky light - disable for minor power savings)
- Meshtastic:
- LoRa radio model
- [URL](https://meshtastic.org/docs/software/python/cli/#--seturl-seturl) (used to configure LoRa settings and channels)
- Security: public key
- Security: private key
- Security: Add Admin Key
- Security: Clear Admin Key List
- Security: [Legacy Admin Channel](https://meshtastic.org/docs/configuration/radio/security/#admin-channel-enabled) enable/disable
### Instructions
The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only - log will not be saved to drive) or ext4 partition. Add a file named `femtofox-config.txt` and whichever settings you would like to change (CaSe sEnSiTiVe).
     <a href download="assets/femtofox-config.txt">[**Get an example USB configuration file here**](assets/femtofox-config.txt)</a>
```
wifi_ssid="Your SSID name"
wifi_psk="wifipassword"
wifi_country="US"
timezone="America/New_York"
act_led="enable"
meshtastic_lora_radio="ebyte-e22-900m30s"
meshtastic_url="https://meshtastic.org/e/#CgMSAQESCAgBOAFAA0gB"
#meshtastic_public_key="XX="
#meshtastic_private_key="XX="
meshtastic_admin_key="XX="
meshtastic_legacy_admin="true"
dont_run_if_log_exists="true"
```
> \[!NOTE\]
> Enter as many or as few settings as you like.
>
> For `wifi_country`, insert your country's [ISO/IEC alpha2 two letter country code](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2#Officially_assigned_code_elements) (such as US, GB, DE, IN, etc.) in capital letters.
>
> Use a timezone as it appears in [the tz database](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones).
>
>   **Meshtastic**
> For `meshtastic_lora_radio`, choose your radio from the supported hardware list.
> Options are:
>
> - `ebyte-e22-900m30s`d
> - `ebyte-e22-900m22s`
> - `ebyte-e80-900m22s` _(experimental)_
> - `heltec-ht-ra62`
> - `seeed-wio-sx1262`
> - `waveshare-sx126x-xxxm`
> - `ai-thinker-ra-01sh`
> - `sx1262_tcxo` _(for Ebyte E22-900M30SM, Ebyte E22-900M22S, Heltec HT-RA62, Seeed Wio SX1262)_
> - `sx1262_xtal` _(for AiThinker RA01SH, and Waveshare Pi hat)_
> - `lr1121_tcxo` _(experimental, for Ebyte E80-900M2213S)_
> - `none` _(for simulated radio)_
>
> Clearing the `meshtastic_admin_key` list: The admin key list can contain up to three keys - _if more are added they will be ignored_. The USB configuration tool supports clearing the admin key list, after which you will need to re-add your admin key/s in a second operation. To clear the admin key list, enter `meshtastic_admin_key="clear"`.
> \[!NOTE\]
> `dont_run_if_log_exists="true"` will prevent the USB configuration tool from working if there's a log present on the USB drive, indicating it has already been run. There is also an LED boot code for this, described below.
**To apply your configuration, reboot the Femtofox with the USB drive plugged in, or run `sudo femto-config` -&gt; `Utilites` -&gt; `Run USB configuration tool`. No other USB drives can be plugged in at the same time.**
A log (`femtofox-config.log`) is saved to `/home/femto` and the USB drive (except on NTFS, which is read only).
<br>
### Boot codes
When the Femtofox is finished booting, it will blink its User LED (see below) in a pattern which can be used to gather info on its status or help diagnose issues.
![LEDs](assets/images/leds.png)
| LED blink pattern | Meaning | Possible causes | Solutions |
| --------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
| <center>⚠️<br>\_______________\_<br>1 very long blink, lasting 5 seconds</center> | Failed to mount USB drive. Ignoring. | • Invalid filesystem<br>• Corrupted partition table<br>• Defective USB drive<br>• Defective USB OTG adapter | • Use a supported partition (FAT32, exFAT, NTFS, ext4)<br>• Repair partition table<br>• Try another USB drive<br>• Try another USB OTG adapter |
| <center>⚠️<br>\_**_\_ \__**\_<br>2 long blinks, each lasting 1.5 seconds</center> | femtofox-config.txt is configured to skip if log exists. | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt |
| <center>⚠️<br>\_**_\_ \__**\_ \____\_<br>3 long blinks, each lasting 1.5 seconds</center> | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. |
| <center>⚠️<br>\_**_\_ \__**\_ \_**_\_ \__**\_ \____\_<br>5 long blinks, each lasting 1.5 seconds</center> | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. |
| <center>⚠️<br>\__\_ \__\_ \_ \_ \__\_ \__\_ \_ \_<br>2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice</center> | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. | • The error may be transient.<br>• Configuration file may contain improper data. | • Try again.<br>• Check configuration file contents as described above.<br>• Check the log.<br><br>This pattern may flash before other patterns. The pattern will repeat once for each failed setting. |
| <center>✅<br>. . . . . . . . . .<br>10 very fast blinks, each lasting 1/8th of a second</center> | USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.<br>Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. | |
| <center>✅<br>\_\_ \_\_ \_\_ \_\_ \_\_<br>5 medium blinks, each lasting 0.5 seconds</center> | Boot complete. Appears on every successful boot and always appears last. | | |
> \[!NOTE\]
> Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete.
<!--stackedit_data:
eyJoaXN0b3J5IjpbLTEyNDQxMzIzXX0=
-->