diff --git a/supported_hardware.md b/supported_hardware.md index 36477f0..c11513c 100644 --- a/supported_hardware.md +++ b/supported_hardware.md @@ -113,7 +113,7 @@ ✔️ ✔️ Idle: 0.25w
TXing: 0.4w
Off: 0.025w -Model tested:
TP-LINK TL-WN725N V2 +Model tested:
TP-LINK TL-WN725N V2: working
TP-Link TL-WR722N V4: working (v2, v3 should be identical) rtl8188ru @@ -260,7 +260,7 @@ ✔️ ✔️ Idle: 0.739w - +Tested:
Genbasic RF 2A4M1: working mt76x0u diff --git a/usb_config.md b/usb_config.md index 595515e..b9af438 100644 --- a/usb_config.md +++ b/usb_config.md @@ -23,14 +23,14 @@ Configurable settings are:

Instructions

The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only - log will not be saved to drive) or ext4 partition. Add a file named femtofox-config.txt and whichever of the the following lines you want to set, keeping in mind this is CaSe sEnSiTiVe:

-
	wifi_ssid="Your SSID name"
-	wifi_psk="wifipassword"
-	wifi_country="US"
-	timezone="America/New_York"
-	meshtastic_lora_radio="ebyte-e22-900m30s"
-	meshtastic_url="https://meshtastic.org/e/#CgMSAQESCAgBOAFAA0gB"
-	meshtastic_admin_key="base64:T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ="
-	meshtastic_legacy_admin="true"
+
wifi_ssid="Your SSID name"
+wifi_psk="wifipassword"
+wifi_country="US"
+timezone="America/New_York"
+meshtastic_lora_radio="ebyte-e22-900m30s"
+meshtastic_url="https://meshtastic.org/e/#CgMSAQESCAgBOAFAA0gB"
+meshtastic_admin_key="base64:T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ="
+meshtastic_legacy_admin="true"
 

[!NOTE]
@@ -76,7 +76,7 @@ A log (femtofox-config.log) is saved to /home/femto an -

⚠️
_____________
1 very long blink, lasting 4 seconds
+
⚠️
________________
1 very long blink, lasting 5 seconds
Failed to mount USB drive. Ignoring.
  • Invalid filesystem
  • Corrupted partition table
  • Defective USB drive
  • Defective USB OTG adapter
  • Use a supported partition (FAT32, exFAT, NTFS, ext4)
  • Repair partition table
  • Try another USB drive
  • Try another USB OTG adapter