diff --git a/environment-setup/femtofox.chroot b/environment-setup/femtofox.chroot
index 6168a8c..e45fae5 100644
--- a/environment-setup/femtofox.chroot
+++ b/environment-setup/femtofox.chroot
@@ -53,7 +53,12 @@ echo "femtofox" | tee /etc/hostname > /dev/null
echo "Configuring autostart of systemd services..."
systemctl enable button
+systemctl enable meshtasticd
+systemctl enable femto-runonce.service
+systemctl enable femto-usb-config-tool.service
+systemctl enable femto-boot-complete.service
systemctl enable wifi-mesh-control
+
systemctl disable NetworkManager
systemctl disable NetworkManager-dispatcher
systemctl disable NetworkManager-wait-online
diff --git a/foxbuntu/project/cfg/BoardConfig_IPC/overlay/overlay-luckfox-ubuntu/etc/rc.local b/foxbuntu/project/cfg/BoardConfig_IPC/overlay/overlay-luckfox-ubuntu/etc/rc.local
index 067210a..4e7b166 100755
--- a/foxbuntu/project/cfg/BoardConfig_IPC/overlay/overlay-luckfox-ubuntu/etc/rc.local
+++ b/foxbuntu/project/cfg/BoardConfig_IPC/overlay/overlay-luckfox-ubuntu/etc/rc.local
@@ -4,14 +4,12 @@
#/etc/init.d/S50usbdevice start
#run only on first boot
-if [ -e "/etc/.firstboot" ]; then
- /usr/local/bin/femto-runonce.sh
-fi
+#if [ -e "/etc/.firstboot" ]; then
+# /usr/local/bin/femto-runonce.sh
+#fi
luckfox-config load
-systemctl restart meshtasticd #TEMPORARY bugfix
-
# try enable RTC
echo 'ds1307 0x68' | sudo tee /sys/class/i2c-adapter/i2c-3/new_device > /dev/null 2>&1
@@ -25,21 +23,21 @@ echo 34 > /sys/class/gpio/export && echo out > /sys/class/gpio/gpio34/direction
#(sleep 5 && cpufreq-set -u 408000 && echo "Boot complete, setting CPU frequency to 408mhz.") &
# run USB automount and config tool
-/usr/local/bin/femto-usb-config-tool.sh
+#/usr/local/bin/femto-usb-config-tool.sh
# boot complete
-(
- echo "Disabling ACT LED..."
- echo "none" > /sys/class/leds/work/trigger &
- sleep 1
-
- # blink successful boot code
- for i in $(seq 1 5); do
- echo 1 > /sys/class/gpio/gpio34/value;
- sleep 0.5;
- echo 0 > /sys/class/gpio/gpio34/value;
- sleep 0.5;
- done
-) &
+#(
+# echo "Disabling ACT LED..."
+# echo "none" > /sys/class/leds/work/trigger &
+# sleep 1
+#
+# # blink successful boot code
+# for i in $(seq 1 5); do
+# echo 1 > /sys/class/gpio/gpio34/value;
+# sleep 0.5;
+# echo 0 > /sys/class/gpio/gpio34/value;
+# sleep 0.5;
+# done
+#) &
exit 0
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/avahi/services/meshtasticd.service b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/avahi/services/meshtasticd.service
index e0e3ece..8240266 100644
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/avahi/services/meshtasticd.service
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/avahi/services/meshtasticd.service
@@ -3,7 +3,7 @@
Meshtastic
- _meshtastic._tcp
- 4403
+ _http._tcp
+ 80
-
\ No newline at end of file
+
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-boot-complete.service b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-boot-complete.service
new file mode 100644
index 0000000..ae450b3
--- /dev/null
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-boot-complete.service
@@ -0,0 +1,14 @@
+[Unit]
+Description=Boot Complete
+After=serial-getty@ttyFIQ0.service
+DefaultDependencies=no
+
+[Service]
+ExecStart=/usr/local/bin/femto-boot-complete.sh
+Type=oneshot
+Restart=no
+StandardOutput=journal+console
+StandardError=journal+console
+
+[Install]
+WantedBy=default.target
\ No newline at end of file
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-runonce.service b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-runonce.service
new file mode 100644
index 0000000..d5692f4
--- /dev/null
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-runonce.service
@@ -0,0 +1,16 @@
+[Unit]
+Description=Foxbuntu First Boot
+After=meshtasticd.service
+Before=serial-getty@ttyFIQ0.service
+DefaultDependencies=no
+
+[Service]
+ExecStart=/usr/local/bin/femto-runonce.sh
+Type=oneshot
+Restart=no
+StandardOutput=journal+console
+StandardError=journal+console
+
+[Install]
+WantedBy=default.target
+
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-usb-config-tool.service b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-usb-config-tool.service
new file mode 100644
index 0000000..679b722
--- /dev/null
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/femto-usb-config-tool.service
@@ -0,0 +1,16 @@
+[Unit]
+Description=Foxbuntu USB Configuration Tool
+After=meshtasticd.service
+Before=serial-getty@ttyFIQ0.service
+DefaultDependencies=no
+
+[Service]
+ExecStart=/usr/local/bin/femto-usb-config-tool.sh
+Type=oneshot
+Restart=no
+StandardOutput=journal+console
+StandardError=journal+console
+
+[Install]
+WantedBy=default.target
+
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/meshtasticd.service.d/override.conf b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/meshtasticd.service.d/override.conf
index 9afc90b..4016f36 100644
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/meshtasticd.service.d/override.conf
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/etc/systemd/system/meshtasticd.service.d/override.conf
@@ -1,3 +1,9 @@
[Service]
-ExecStartPost=/bin/sh -c 'renice -n -20 -p $(pgrep meshtasticd)'
+ExecStart=
+ExecStart=/bin/sh -c '/usr/sbin/meshtasticd -h $(sed -n "/Serial/ s/^.*: \(.*\)$/\U\1/p" /proc/cpuinfo | bc | tail -c 9)'
+Nice=-20
+[Unit]
+After=rc-local.service
+Wants=rc-local.service
+After=network-online.target
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/lib/systemd/system/wifi-mesh-control.service b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/lib/systemd/system/wifi-mesh-control.service
index d07e1c7..3860f53 100644
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/lib/systemd/system/wifi-mesh-control.service
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/lib/systemd/system/wifi-mesh-control.service
@@ -1,6 +1,7 @@
[Unit]
Description=Meshtastic control of wifi
-After=network.target
+After=meshtasticd.service
+Requires=meshtasticd.service
[Service]
ExecStart=/usr/local/bin/wifi-mesh-control.sh
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-boot-complete.sh b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-boot-complete.sh
new file mode 100755
index 0000000..2875bc7
--- /dev/null
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-boot-complete.sh
@@ -0,0 +1,15 @@
+#!/bin/bash
+echo "Boot complete"
+
+echo "Disabling ACT LED..."
+echo "none" > /sys/class/leds/work/trigger &
+sleep 1
+
+# blink successful boot code
+for i in $(seq 1 5); do
+ echo 1 > /sys/class/gpio/gpio34/value;
+ sleep 0.5;
+ echo 0 > /sys/class/gpio/gpio34/value;
+ sleep 0.5;
+done
+exit 0
\ No newline at end of file
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-network-config.sh b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-network-config.sh
index aae75e8..50140c2 100755
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-network-config.sh
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-network-config.sh
@@ -155,7 +155,7 @@ done
if [ "$updated_wifi" = true ]; then
ip link set wlan0 up
- systemctl restart wpa_supplicant
+ #systemctl restart wpa_supplicant
wpa_cli -i wlan0 reconfigure # <-------- add watch for FAIL response, error out
- timeout 30s dhclient -v
+ #timeout 30s dhclient -v
fi
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-runonce.sh b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-runonce.sh
index 4891e8e..2d78e45 100755
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-runonce.sh
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-runonce.sh
@@ -5,13 +5,16 @@ log_message() {
}
if [ ! -e "/etc/.firstboot" ]; then
+
+ who | grep -q . || exit 0
+
# prevents weirdness over tty
export NCURSES_NO_UTF8_ACS=1
export TERM=xterm-256color
export LANG=C.UTF-8
dialog --title "Femtofox run once utility" --yesno "\
This does not appear to be this system's first boot.\n\
-Re-running this script will restore RTC support, set the Meshtastic nodeid and eth0 MAC address to be derivative of the CPU serial number, set the Meshtastic wifi status to \`enabled\` and then reboot.\n\
+Re-running this script will resize the filesystem to fit the SD card, allocate a swap file, add RTC support, add terminal type to .bashrc, set the eth0 MAC address to be derivative of the CPU serial number and then reboot.\n\
\n\
Re-running this script after first boot should not cause any harm, but may not work as expected.\n\
\n\
@@ -21,6 +24,9 @@ Proceed?" 14 60
fi
fi
+# Disable LED to prevent boot codes from showing during this boot
+echo 34 > /sys/class/gpio/unexport
+
# Perform filesystem resize
log_message "Resizing filesystem. This can take up to 10 minutes, depending on microSD card size and speed"
sudo resize2fs /dev/mmcblk1p5
@@ -28,13 +34,13 @@ fi
sudo resize2fs /dev/mmcblk1p7
# allocate swap file
-if [ ! -f /etc/.filesystem_swap ]; then # check if swap file already exists
+if [ ! -f /swapfile ]; then # check if swap file already exists
sudo fallocate -l 1G /swapfile
sudo chmod 600 /swapfile
sudo mkswap /swapfile > /dev/null
sudo swapon /swapfile > /dev/null
echo '/swapfile none swap sw 0 0' | tee -a /etc/fstab > /dev/null
- touch /etc/.filesystem_swap
+# touch /etc/.filesystem_swap # no longer used
log_message "Swap file allocated."
else
log_message "Swap file already allocated, skipping."
@@ -61,9 +67,7 @@ fi
lines="export NCURSES_NO_UTF8_ACS=1
export TERM=xterm-256color
export LANG=C.UTF-8"
-
-# Check if the lines are already in .bashrc
-if ! grep -Fxq "$lines" /home/femto/.bashrc; then
+if ! grep -Fxq "$lines" /home/femto/.bashrc; then # Check if the lines are already in .bashrc
echo "$lines" >> /home/femto/.bashrc
echo "Added TERM, LANG and NCURSES_NO_UTF8_ACS to .bashrc"
else
@@ -71,16 +75,16 @@ else
fi
# set meshtastic nodeid to derivative of CPU serial number (unique to this board)
-seed=$(sed -n '/Serial/ s/^.*: \(.*\)$/\U\1/p' /proc/cpuinfo | bc | tail -c 9)
+#seed=$(sed -n '/Serial/ s/^.*: \(.*\)$/\U\1/p' /proc/cpuinfo | bc | tail -c 9)
#seed=$((0x$(awk '/Serial/ {print $3}' /proc/cpuinfo) & 0x3B9AC9FF)) #alternate method for generating seed - not in use
-sed -i "s|^ExecStart=/usr/sbin/meshtasticd.*|ExecStart=/usr/sbin/meshtasticd -h $seed|" /usr/lib/systemd/system/meshtasticd.service
-log_message "Using Luckfox CPU S/N to generate nodeid for Meshtastic."
-systemctl daemon-reload
-systemctl enable meshtasticd
-systemctl restart meshtasticd
+#sed -i "s|^ExecStart=/usr/sbin/meshtasticd.*|ExecStart=/usr/sbin/meshtasticd -h $seed|" /usr/lib/systemd/system/meshtasticd.service
+#log_message "Using Luckfox CPU S/N to generate nodeid for Meshtastic."
+#systemctl daemon-reload
+#systemctl enable meshtasticd
+#systemctl restart meshtasticd
# remove first boot flag
rm /etc/.firstboot
log_message "Removing first boot flag and rebooting in 5 seconds..."
sleep 5
-reboot
\ No newline at end of file
+reboot
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-usb-config-tool.sh b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-usb-config-tool.sh
index e76f999..18e7d62 100755
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-usb-config-tool.sh
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-usb-config-tool.sh
@@ -1,4 +1,11 @@
#!/bin/bash
+
+if [ -e "/etc/.firstboot" ]; then
+ echo "First boot, skipping USB Configuration Tool."
+ logger "First boot, skipping USB Configuration Tool."
+ exit 0
+fi
+
mount_point="/mnt/usb" # Set the mount point
# Function to log to screen, syslog and logfile to be saved to usb drive
@@ -8,6 +15,12 @@ log_message() {
echo "$(date +"%Y-%m-%d %H:%M:%S") $1" >> /tmp/femtofox-config.log
}
+if [ -e "/etc/.firstboot" ]; then
+ echo "First boot, skipping USB Configuration Tool."
+ logger "First boot, skipping USB Configuration Tool."
+ exit 0
+fi
+
exit_script() {
if [ ! -z "$usb_path" ]; then #if usb path is populated
if ! df -T /mnt/usb 2>/dev/null | grep -qw 'ntfs'; then
@@ -146,7 +159,8 @@ if [ -f "$mount_point/femtofox-config.txt" ]; then
if [[ -n "$wifi_psk" ]]; then
# Update the psk in the network block
wifi_command="$wifi_command -p \"$wifi_psk\""
- log_message "Updating Wi-Fi PSK in wpa_supplicant.conf to \`$wifi_psk\`."
+ #log_message "Updating Wi-Fi PSK in wpa_supplicant.conf to \`$wifi_psk\`."
+ log_message "Updating Wi-Fi PSK in wpa_supplicant.conf to *HIDDEN*."
found_config="true"
update_wifi="true"
fi
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/wifi-mesh-control.sh b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/wifi-mesh-control.sh
index 0ff79a6..9192e03 100755
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/wifi-mesh-control.sh
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/wifi-mesh-control.sh
@@ -67,8 +67,8 @@ monitor_changes() {
while true; do
PID=$(ps -C meshtasticd -o pid= | tr -d ' ')
- if [[ -n "$PID" ]] && sudo lsof /dev/spidev0.0 | grep -q "$PID"; then
- #if sudo lsof /dev/spidev0.0 | grep -q "meshtasticd"; then
+ #if [[ -n "$PID" ]] && sudo lsof /dev/spidev0.0 | grep -q "$PID"; then
+ if [[ -n "$PID" ]] && sudo lsof /dev/spidev0.0 | grep -q "$PID" && [[ -d /sys/class/net/wlan0 ]]; then
local current_mobile_state current_wlan_state
current_mobile_state=$(get_mobile_wifi_state)
current_wlan_state=$(cat /sys/class/net/wlan0/operstate)
diff --git a/foxbuntu/sysdrv/source/kernel/arch/arm/boot/dts/rv1106g-luckfox-pico-ultra-w.dts b/foxbuntu/sysdrv/source/kernel/arch/arm/boot/dts/rv1106g-luckfox-pico-ultra-w.dts
new file mode 100644
index 0000000..2465807
--- /dev/null
+++ b/foxbuntu/sysdrv/source/kernel/arch/arm/boot/dts/rv1106g-luckfox-pico-ultra-w.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1106.dtsi"
+#include "rv1106-luckfox-pico-ultra-ipc.dtsi"
+#include
+#include
+
+/ {
+ model = "Luckfox Pico Ultra W";
+ compatible = "rockchip,rv1103g-38x38-ipc-v10", "rockchip,rv1106g3";
+
+ restart-poweroff {
+ compatible = "restart-poweroff";
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless_bluetooth: wireless-bluetooth {
+ compatible = "bluetooth-platdata";
+ uart_rts_gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "rts_gpio";
+ pinctrl-0 = <&uart1m0_rtsn>;
+ pinctrl-1 = <&uart1_gpios>;
+ BT,wake_gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ BT,wake_host_irq = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+};
+
+/**********CRU**********/
+//&cru {
+// assigned-clocks =
+// <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+// <&cru ARMCLK>,
+// <&cru ACLK_PERI_ROOT>, <&cru HCLK_PERI_ROOT>,
+// <&cru PCLK_PERI_ROOT>, <&cru ACLK_BUS_ROOT>,
+// <&cru PCLK_TOP_ROOT>, <&cru PCLK_PMU_ROOT>,
+// <&cru HCLK_PMU_ROOT>, <&cru CLK_500M_SRC>;
+// assigned-clock-rates =
+// <1188000000>, <700000000>,
+// <1104000000>,
+// <400000000>, <200000000>,
+// <100000000>, <300000000>,
+// <100000000>, <100000000>,
+// <200000000>, <700000000>;
+//};
+
+/**********NPU**********/
+//&npu {
+// assigned-clock-rates = <700000000>;
+//};
+
+/**********EMMC**********/
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ non-removable;
+ // mmc-hs200-1_8v;
+ rockchip,default-sample-phase = <90>;
+ no-sdio;
+ no-sd;
+ memory-region-ecsd = <&mmc_ecsd>;
+ post-power-on-delay-ms = <0>;
+ status = "okay";
+};
+
+&fiq_debugger {
+ rockchip,irq-mode-enable = <1>;
+ status = "okay";
+};
+
+/**********SDIO-WIFI**********/
+&sdmmc {
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ non-removable;
+ rockchip,default-sample-phase = <90>;
+ // no-sd;
+ // no-mmc;
+ supports-sdio;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+ status = "okay";
+};
+
+&pinctrl{
+ sdmmc0{
+ sdmmc0_det: sdmmc0-det {
+ rockchip,pins =
+ /* sdmmc0_det */
+ <3 RK_PA1 1 &pcfg_pull_down>;
+ };
+ };
+};
+
+
+/**********ETH**********/
+&gmac {
+ status = "okay";
+};
+
+/**********USB**********/
+&usbdrd_dwc3 {
+ status = "okay";
+ dr_mode = "host";
+ #dr_mode = "host";
+};
+
+/**********RTC**********/
+&rtc {
+ status = "okay";
+};
+
+/**********BT**********/
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+};
+
+&pinctrl {
+ wireless-bluetooth {
+ uart1_gpios: uart1-gpios {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+/**********SPI**********/
+&spi0 {
+ status = "okay";
+ spidev@0 {
+ spi-max-frequency = <50000000>;
+ };
+};
diff --git a/foxbuntu/sysdrv/source/kernel/arch/arm/boot/dts/rv1106g-luckfox-pico-ultra.dts b/foxbuntu/sysdrv/source/kernel/arch/arm/boot/dts/rv1106g-luckfox-pico-ultra.dts
new file mode 100644
index 0000000..c988795
--- /dev/null
+++ b/foxbuntu/sysdrv/source/kernel/arch/arm/boot/dts/rv1106g-luckfox-pico-ultra.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1106.dtsi"
+#include "rv1106-luckfox-pico-ultra-ipc.dtsi"
+#include
+#include
+
+/ {
+ model = "Luckfox Pico Ultra";
+ compatible = "rockchip,rv1103g-38x38-ipc-v10", "rockchip,rv1106g3";
+};
+
+/**********CRU**********/
+//&cru {
+// assigned-clocks =
+// <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+// <&cru ARMCLK>,
+// <&cru ACLK_PERI_ROOT>, <&cru HCLK_PERI_ROOT>,
+// <&cru PCLK_PERI_ROOT>, <&cru ACLK_BUS_ROOT>,
+// <&cru PCLK_TOP_ROOT>, <&cru PCLK_PMU_ROOT>,
+// <&cru HCLK_PMU_ROOT>, <&cru CLK_500M_SRC>;
+// assigned-clock-rates =
+// <1188000000>, <700000000>,
+// <1104000000>,
+// <400000000>, <200000000>,
+// <100000000>, <300000000>,
+// <100000000>, <100000000>,
+// <200000000>, <700000000>;
+//};
+
+/**********NPU**********/
+//&npu {
+// assigned-clock-rates = <700000000>;
+//};
+
+/**********EMMC**********/
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ non-removable;
+ // mmc-hs200-1_8v;
+ rockchip,default-sample-phase = <90>;
+ no-sdio;
+ no-sd;
+ memory-region-ecsd = <&mmc_ecsd>;
+ post-power-on-delay-ms = <0>;
+ status = "okay";
+};
+
+&fiq_debugger {
+ rockchip,irq-mode-enable = <1>;
+ status = "okay";
+};
+
+/**********ETH**********/
+&gmac {
+ status = "okay";
+};
+
+/**********USB**********/
+&usbdrd_dwc3 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+/**********RTC**********/
+&rtc {
+ status = "okay";
+};
+
+/**********SPI**********/
+&spi0 {
+ status = "okay";
+ spidev@0 {
+ spi-max-frequency = <50000000>;
+ };
+};