From f35c7ba17f892fdde4bd78c8da3e9d740c796511 Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Tue, 10 Dec 2024 17:55:36 +0200 Subject: [PATCH 1/4] usb_config.md updated from https://stackedit.io/ --- usb_config.md | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/usb_config.md b/usb_config.md index b9af438..c408cc1 100644 --- a/usb_config.md +++ b/usb_config.md @@ -41,14 +41,14 @@ Enter as many or as few settings as you like.

For meshtastic_lora_radio, choose your radio from the supported hardware list.
Options are:

Important: You cannot set URL and security settings in the same operation - if you must set both, set the URL first, then edit the femtofox-config.txt file on the USB drive to remove the URL and add in your security settings.

To add a meshtastic_admin_key, copy it from the app and add base64: to the beginning (meshtastic_admin_key="base64:T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ=").

From 3dd1ff27166c9fb01aa291bfb88f04fa6e761865 Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Tue, 10 Dec 2024 17:56:00 +0200 Subject: [PATCH 2/4] usb_config.md updated from https://stackedit.io/ --- usb_config.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/usb_config.md b/usb_config.md index c408cc1..9842544 100644 --- a/usb_config.md +++ b/usb_config.md @@ -100,7 +100,7 @@ A log (femtofox-config.log) is saved to /home/femto an
  • Try again.
  • Check configuration file contents as described above.
  • Check the log.

    This pattern may flash before other patterns. The pattern will repeat once for each failed setting.
  • -
    ✅
    . . . . . . . . . .
    10 very fast blinks, each lasting 1/8th of a second
    +
    ✅
    . . . . . . . . . .
    10 very fast blinks, each lasting 1/8th of a second
    USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. This does not mean that the information in the config file is correct - only that it was readable.
    Note that the “success” boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. From 138d7924e97e6852a526de421fc5e37693c3b694 Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Tue, 10 Dec 2024 18:35:14 +0200 Subject: [PATCH 3/4] supported_hardware.md updated from https://stackedit.io/ --- supported_hardware.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/supported_hardware.md b/supported_hardware.md index c11513c..8a890b2 100644 --- a/supported_hardware.md +++ b/supported_hardware.md @@ -112,7 +112,7 @@ rtl8188eu, rtl8188eus ✔️ ✔️ -Idle: 0.25w
    TXing: 0.4w
    Off: 0.025w +Idle: 0.25w
    TXing: 0.4w
    Off: 0.026w Model tested:
    TP-LINK TL-WN725N V2: working
    TP-Link TL-WR722N V4: working (v2, v3 should be identical) From f5a4d696453e1c275340f04e0d0f5b2da5b02f66 Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Tue, 10 Dec 2024 20:15:22 +0200 Subject: [PATCH 4/4] supported_hardware.md updated from https://stackedit.io/ --- supported_hardware.md | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/supported_hardware.md b/supported_hardware.md index 8a890b2..6ddc1e1 100644 --- a/supported_hardware.md +++ b/supported_hardware.md @@ -235,6 +235,13 @@ +rtl8821au +✔️ +❌ + +Tested:
    TP-Link Archer T2U Plus: NOT working + + rtl8xxx other