From c6ec052fd74ccda50fe899f90687c7e5fce21ba5 Mon Sep 17 00:00:00 2001 From: noon92 <40807970+noon92@users.noreply.github.com> Date: Fri, 24 Jan 2025 16:59:02 +0200 Subject: [PATCH] Update usb_config.md --- usb_config.md | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/usb_config.md b/usb_config.md index 887b5b3..ebf596c 100644 --- a/usb_config.md +++ b/usb_config.md @@ -7,9 +7,12 @@ Configurable settings are: - Wifi PSK (password) - Wifi country - Timezone + - Activity LED (blinky light - disable for minor power savings) - Meshtastic: - LoRa radio model - [URL](https://meshtastic.org/docs/software/python/cli/#--seturl-seturl) (used to configure LoRa settings and channels) + - Security: public key + - Security: private key - Security: Add Admin Key - Security: Clear Admin Key List - Security: [Legacy Admin Channel](https://meshtastic.org/docs/configuration/radio/security/#admin-channel-enabled) enable/disable @@ -23,9 +26,12 @@ wifi_ssid="Your SSID name" wifi_psk="wifipassword" wifi_country="US" timezone="America/New_York" +act_led="enable" meshtastic_lora_radio="ebyte-e22-900m30s" meshtastic_url="https://meshtastic.org/e/#CgMSAQESCAgBOAFAA0gB" -meshtastic_admin_key="T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ=" +#meshtastic_public_key="XX=" +#meshtastic_private_key="XX=" +meshtastic_admin_key="XX=" meshtastic_legacy_admin="true" dont_run_if_log_exists="true" ``` @@ -56,7 +62,7 @@ dont_run_if_log_exists="true" > [!NOTE] > `dont_run_if_log_exists="true"` will prevent the USB configuration tool from working if there's a log present on the USB drive, indicating it has already been run. There is also an LED boot code for this, described below. -**To apply your configuration, reboot the Femtofox with the USB drive plugged in. No other USB drives can be plugged in at the same time.** +**To apply your configuration, reboot the Femtofox with the USB drive plugged in, or run `sudo femto-config` -> `Utilites` -> `Run USB configuration tool`. No other USB drives can be plugged in at the same time.** A log (`femtofox-config.log`) is saved to `/home/femto` and the USB drive (except on NTFS, which is read only).
### Boot codes @@ -74,6 +80,3 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in > [!NOTE] > Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete. - \ No newline at end of file