diff --git a/foxbuntu_install.md b/foxbuntu_install.md index cfd4390..add4de2 100644 --- a/foxbuntu_install.md +++ b/foxbuntu_install.md @@ -20,9 +20,6 @@ To install Foxbuntu, you'll need the following: * On Femtofox Pro, connect the *Power USB-C port* to your PC with a cable, and open a serial console application such as PuTTY for windows. Select your the Femtofox's COM port (find the correct COM port in Windows hitting WIN+R and entering `cmd /k wmic path Win32_SerialPort get DeviceID, Description && pause`. The port should be named "USB-SERIAL CH340". * Use a USB UART serial adapter to connect to UART2 (serial debug pins). * Use an ethernet cable and SSH in. Femtofox's default hostname is femtofox.local. -5. Connect the Femtofox to power, either via the *power USB-C port* (Pro model only, on the same side as the ethernet port) or via the power-in JST power plug. +5. Connect the Femtofox to power, either via the *power USB-C port* (Pro model only, on the same side as the ethernet port) or via the power-in JST power plug. Using the USB-C port on the Luckfox is possible, but will prevent usage of USB peripherals. 6. The Femtofox will perform its first boot. This can take up to 5 minutes (subsequent boots ~40 seconds). When boot is complete, the USR LED will blink 5 times, 1/2 a second each. 7. Default username and password is `femto`:`femto`. You are required to change the password on first login. - \ No newline at end of file