mirror of
https://github.com/femtofox/femtofox.git
synced 2026-11-20 06:56:29 -05:00
usb_config.md updated from https://stackedit.io/
This commit is contained in:
parent
c548b4f78d
commit
d32bc35bb8
1 changed files with 5 additions and 5 deletions
|
|
@ -71,11 +71,11 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in
|
|||

|
||||
| LED blink pattern | Meaning | Possible causes | Solutions |
|
||||
|--|--|--|--|
|
||||
| <p align="center">⚠️<br>**──────────**<br>1 very long blink, lasting 5 seconds</center>| • Failed to mount USB drive. Ignoring.| Invalid filesystem<br>•Corrupted partition table<br>• Defective USB drive<br>• Defective USB OTG adapter | • Use a supported partition (FAT32, exFAT, NTFS, ext4)<br>• Repair partition table<br>• Try another USB drive<br>• Try another USB OTG adapter |
|
||||
| <p align="center">⚠️<br>**─── ───**<br>2 long blinks, each lasting 1.5 seconds</center> |femtofox-config.txt is configured to skip if log exists. | femtofox-config.txt is configured to skip if USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt |
|
||||
| <p align="center">⚠️<br>**─── ─── ───**<br>3 long blinks, each lasting 1.5 seconds</center> blinks, each lasting 1. | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. |
|
||||
| <p align="center">⚠️<br>**──────────**<br>1 very long blink, lasting 5 seconds</center>| • Failed to mount USB drive. Ignoring.| Invalid filesystem<br>•Corrupted partition table<br>• Defective USB drive<br>• Defective USB OTG adapter| • Use a supported partition (FAT32, exFAT, NTFS, ext4)<br>• Repair partition table<br>• Try another USB drive<br>• Try another USB OTG adapter|
|
||||
| <p align="center">⚠️<br>**─── ───**<br>2 long blinks, each lasting 1.5 seconds</center>|femtofox-config.txt is configured to skip if log exists.| femtofox-config.txt is configured to skip if USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring.| Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt |
|
||||
| <p align="center">⚠️<br>**─── ─── ───**<br>3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring.| Config file missing.| Create configuration file as described above.|
|
||||
| <p align="center">⚠️<br>**─── ─── ─── ─── ───**<br>5 long blinks, each lasting 1.5 seconds</center> | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. |
|
||||
| <p align="center">⚠️<br>**── ── - -**<br>2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. | • The error may be transient.<br>• >Configuration file may contain improper data. | • Try again.<br>• >Check configuration file contents as described above.<br>• >Check the log.<br><br>This pattern may flash before other patterns. The pattern will repeat once for each failed setting. |
|
||||
| <p align="center">⚠️<br>**── ── - -**<br>2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. | • The error may be transient.<br>• Configuration file may contain improper data. | • Try again.<br>• Check configuration file contents as described above.<br>• Check the log.<br><br>This pattern may flash before other patterns. The pattern will repeat once for each failed setting. |
|
||||
| <p align="center">✅<br>**· · · · · · · · · ·**<br>10 very fast blinks, each lasting 1/8th of a second</center> | USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.<br>Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. | |
|
||||
| <p align="center">✅<br>**─ ─ ─ ─ ─**<br> 5 medium blinks, each lasting 0.5 seconds</center> | Boot complete. Appears on every successful boot and always appears last.| | Hooray! |
|
||||
> \[!NOTE\]
|
||||
|
|
@ -86,5 +86,5 @@ eyJoaXN0b3J5IjpbLTE5OTAxODA3OSwtMjYyOTMyNDldfQ==
|
|||
> \[!NOTE\]
|
||||
> Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete.
|
||||
<!--stackedit_data:
|
||||
eyJoaXN0b3J5IjpbMTExNDg5MzE5NF19
|
||||
eyJoaXN0b3J5IjpbLTE5MzkwMTkyOTFdfQ==
|
||||
-->
|
||||
Loading…
Add table
Add a link
Reference in a new issue