diff --git a/usb_config.md b/usb_config.md index e8d30e2..3bb9182 100644 --- a/usb_config.md +++ b/usb_config.md @@ -20,7 +20,7 @@ Configurable settings are: ### Instructions The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only - log will not be saved to drive) or ext4 partition. Add a file named `femtofox-config.txt` and whichever settings you would like to change (CaSe sEnSiTiVe). -     **[Get an example USB configuration file here](assets/femtofox-config.txt) +         **[Get an example USB configuration file here](assets/femtofox-config.txt) ``` wifi_ssid="Your SSID name" wifi_psk="wifipassword" @@ -42,7 +42,7 @@ dont_run_if_log_exists="true" > > Use a timezone as it appears in [the tz database](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones). > ->   **Meshtastic** +>     **Meshtastic** > For `meshtastic_lora_radio`, choose your radio from the supported hardware list. > Options are: > `ebyte-e22-900m30s` @@ -76,7 +76,7 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in |

⚠️
**───\_\_\_\_\_  \_\_\_\_\_ ─── \_\_\_\_\_  ───\_\_\_\_\_   ───   ───**\_\_\_\_\_
5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | | Check configuration file contents as described above. | |

⚠️
**──\_\_\_  \_\_\_  \_  \_ ── \_\_\_  -\_\_\_  \_ -** \_
2 longcenter>⚠️
nbspnbsnbspnspnbspnbspnbspnbsp
long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. |

  • The error may be transient.<>Configuration file may contain improper data.
  • Try again.<>Check configuration file contents as described above.<>Check the log.
    This pattern may flash before other patterns. The pattern will repeat once for each failed setting. | +|center">⚠️
    **──\_\_\_  \_\_\_  \_n  \_ ── \_\_\_  -\_\_\_  \_ -** \_
    2 longcenter>⚠️
    nbspnbsnbspnspnbspnbspnbspnbsp
    long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. |
  • The error may be transient.<>Configuration file may contain improper data. |
  • Try again.<>Check configuration file contents as described above.<>Check the log.
    This pattern may flash before other patterns. The pattern will repeat once for each failed setting. | |

    ✅
    **. . . . . . . . . .**
    10 very fast blinks, each lasting 1/8th of a second
    | USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.
    Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. | | |

    ✅
    **─\_\_  \_\_ ─ \_\_  ─   ─   ─**
    5 medium blinks, each lasting 0.5 seconds | Boot complete. Appears on every successful boot and always appears last. | | | @@ -176,5 +176,5 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in > \[!NOTE\] > Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete. \ No newline at end of file