diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-pinout.sh b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-pinout.sh
new file mode 100644
index 0000000..6aab26d
--- /dev/null
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femto-pinout.sh
@@ -0,0 +1,83 @@
+#!/bin/bash
+
+help=$(cat <<EOF
+Options are:
+-h             This message
+-a             Display all pinouts
+-l             Luckfox pinout
+-f             Femtofox pinout
+-z             Femtofox Smol/Zero pinout
+-t             Femtofox Tiny pinout
+EOF
+)
+
+if [ $# -eq 0 ]; then
+  echo "No arguments provided."
+  echo -e "$help"
+  exit 1
+fi
+
+luckfox="\
+|Pin #|Pin ID |Function      | Luckfox |Pin #|Pin ID |Function      |\n\
+|-----|-------|--------------|---------|-----|-------|--------------|\n\
+|1    |VBus   |5V in/out     |   USB   |22   |1V8    |1.8V out      |\n\
+|2    |GND    |              |         |21   |GND    |              |\n\
+|3    |3V3    |3.3V out      |         |20   |4C1    |1v8 IO, SARADC|\n\
+|4/42 |1B2    |Debug UART2-TX|         |19   |4C0    |1v8 IO, SARADC|\n\
+|5/43 |1B3    |Debug UART2-RX|     [b] |18/4 |0A4    |3v3 IO        |\n\
+|6/48 |1C0    |CS0, IO       |         |17/55|1C7    |IRQ, IO       |\n\
+|7/49 |1C1    |CLK, IO       |         |16/54|1C6    |BUSY, IO      |\n\
+|8/50 |1C2    |MOSI, IO      |         |15/59|1D3    |i2c SCL       |\n\
+|9/51 |1C3    |MISO, IO      |         |14/58|1D2    |i2c SDA       |\n\
+|10/52|1C4    |UART4-TX      |         |13/57|1D1    |UART3-RX, NRST|\n\
+|11/53|1C5    |UART4-RX      |   ETH   |12/56|1D0    |UART3-TX, RXEN|\n\
+|-----|-------|--------------|---------|-----|-------|--------------|\n\
+                              R R G T T\n\
+                              X X N X X\n\
+                              - + D - +"
+
+femtofox="coming soon"
+
+femtofox_zero="coming soon"
+
+femtofox_tiny="coming soon"
+
+
+# Parse options
+while getopts "halfzt" opt; do
+  case ${opt} in
+    h) # Option -h (help)
+      echo -e "$help"
+      ;;
+    a)  # Option -s (ssid)
+      echo "$luckfox"
+      echo "\n"
+      echo "$femtofox"
+      echo "\n"
+      echo "$femtofox_zero"
+      echo "\n"
+      echo "$femtofox_tiny"
+      ;;
+    l)  # Option -p (psk)
+      sed -i "/psk=/s/\".*\"/\"$OPTARG\"/" "$wpa_supplicant_conf"
+      echo "Setting PSK to $OPTARG."
+      updated_wifi="true"
+      ;;
+    f) # Option -c (country)
+      sed -i "/country=/s/=[^ ]*/=$OPTARG/" "/etc/wpa_supplicant/wpa_supplicant.conf"
+      echo "Setting country to $OPTARG."
+      updated_wifi="true"
+      ;;
+    z) # Option -r (restart wifi)
+      updated_wifi="true"
+      ;;
+    t) # Option -r (restart wifi)
+      updated_wifi="true"
+      ;;
+    \?)  # Invalid option
+      echo "Invalid option: -$OPTARG"
+      echo -e "$help"
+      exit 1
+      ;;
+  esac
+done
\ No newline at end of file
diff --git a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femtofox-config b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femtofox-config
index 854c495..0b0257f 100755
--- a/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femtofox-config
+++ b/foxbuntu/sysdrv/out/rootfs_uclibc_rv1106/usr/local/bin/femtofox-config
@@ -91,8 +91,10 @@ misc_settings() {
     option=$(dialog --menu "Misc Settings" 15 40 4 \
       1 "Set system timezone" \
       2 "Ham radio support" \
-      3 "blah" \
-    4 "Back to Main Menu" 3>&1 1>&2 2>&3)
+      3 "Re-run first-boot script" \
+      4 "Display pinout" \
+      5 "Run OEM luckfox-config" \
+      6 "Back to Main Menu" 3>&1 1>&2 2>&3)
     
     exit_status=$? # This line checks the exit status of the dialog command
     if [ $exit_status -ne 0 ]; then # Exit the loop if the user selects "Cancel" or closes the dialog
@@ -145,9 +147,20 @@ then \`depmod\` will be run. To remove support, those modules will be deleted.\n
         depmod -a 5.10.160
       ;;
       3)
-        dialog --msgbox "Node info retrieved successfully!" 8 40
+        dialog --title "$title" --yesno "Rerunning the first-boot script will add support for RTC (real time clock), \
+set the eth0 MAC address and Meshtastic nodeID to a derivative of the CPU serial number and enable wifi in Meshtastic settings. \
+Rerunning the script will not cause any issues if these things are already in place. Femtofox will reboot after execution.\n\nConfirm?" 12 60
+         if [ $? -eq 0 ]; then #unless cancel/no
+          runonce.sh
+        fi
       ;;
       4)
+        dialog --title "$title" --msgbox "$(femto-pinout.sh -a | sed 's/|n/\\n/g')" 0 0
+      ;;
+      5)
+        luckfox-config
+      ;;
+      6)
         return
       ;;
     esac
@@ -158,7 +171,7 @@ then \`depmod\` will be run. To remove support, those modules will be deleted.\n
 set_lora_radio() {
   while true; do
     local option=""
-    option=$(dialog --menu "Misc Settings" 0 0 10 \
+    option=$(dialog --menu "Misc" 0 0 10 \
       1 "ebyte-e22-900m30s" \
       2 "ebyte-e22-900m22s" \
       3 "ebyte-e80-900m22s" \
@@ -250,6 +263,7 @@ meshtasticd_settings() {
     case $option in
       1) #Get current configuration URL & QR code)
         femto-meshtasticd-config.sh -g
+        pause
       ;;
       2)
         newurl=$(dialog --title "Meshtastic URL" --inputbox "New Meshtasticd URL (SHIFT+INS to paste):" 8 50 3>&1 1>&2 2>&3)
@@ -329,9 +343,8 @@ while true; do
     2 "Meshtasticd" \
     3 "Misc" \
     4 "Software" \
-    5 "Run OEM luckfox-config" \
-    6 "Help" \
-  7 "Exit" 3>&1 1>&2 2>&3)
+    5 "Help" \
+    6 "Exit" 3>&1 1>&2 2>&3)
   
   exit_status=$? # This line checks the exit status of the dialog command
   
@@ -344,9 +357,8 @@ while true; do
     2) meshtasticd_settings ;;
     3) misc_settings ;;
     4) software_settings ;;
-    5) luckfox-config ;;
-    6) femto_help ;;
-    7) break ;;
+    5) femto_help ;;
+    6) break ;;
     *) dialog --msgbox "Invalid choice, please try again." 8 40 ;;
   esac
 done