The Luckfox Pico Mini is a compact and power efficient (~0.25w) Linux capable board, ideal for running TC2 Meshtastic BBS (or anything else).
Advantages:
@@ -18,7 +39,7 @@
By default, no simple way to get online (no built in wifi/BLE/ethernet). Ethernet can be easily added - wifi still work in progress - see Networking below)
Annoying SDK for building firmware images
No simple way to compile drivers (no available Linux headers - if anyone manages to compile the headers, please let me know)
-
USB seems very power limited - highest observed current is low - just 0.08a at 5v (0.4w). It seems that if power draw exceeds this limit, the device will bootloop or hard crash.
+
USB seems very power limited - highest observed current is low - just 0.08a at 5v (0.4w). It seems that if power draw exceeds this limit, the device will bootloop or hard crash
Accomplished:
@@ -29,7 +50,7 @@
Meshtastic native client controlling a LoRa radio (see supported hardware below)
USB mass storage
Real time clock (RTC) support (see supported hardware below)
-
Activity LED disabled. User LED will blink for 5 seconds when boot is complete.
+
Activity LED disabled. User LED will blink for 5 seconds when boot is complete
Issues / to do / in progress:
@@ -38,11 +59,12 @@
Custom carrier PCB with LoRa radio (in progress)
Custom PCB for USB, with power injection and GPIO/i2c control (in progress)
Prevent hanging on boot when no network ("[ ***] A start job is running for Raise network interfaces (2min 10s / 5min 6s") - probably solved
+
Test power consumption with LoRa radio attached to figure out what size solar panel will be required
Project goals:
-
A solar-deployable Meshtastic node running Linux, without needing a giant solar panel or battery.
-
Wifi capabilities.
+
A solar-deployable Meshtastic node running Linux, without needing a giant solar panel / battery.
+
Wifi capabilities (with ability to disable/enable wifi via mesh for power savings.
I’ve built three Ubuntu 22.04.5 LTS images with Luckfox’s SDK: