diff --git a/usbconfig.md b/usbconfig.md index 93f63da..04d2f91 100644 --- a/usbconfig.md +++ b/usbconfig.md @@ -10,23 +10,36 @@ Configurable settings are:
The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only) or ext4 partition. Add a file named femtofox-config.txt and add the following lines, keeping in mind this is CaSe sEnSiTiVe:
The USB drive must be formatted with a single FAT32, exFAT, NTFS (read only) or ext4 partition. Add a file named femtofox-config.txt and whichever of the the following lines you want to set, keeping in mind this is CaSe sEnSiTiVe:
wifi_ssid="Your SSID name"
wifi_psk="wifipassword"
wifi_country="US"
- lora_radio="ebyte-e22-900m30s"
timezone="America/New_York"
+ meshtastic_lora_radio="ebyte-e22-900m30s"
+ meshtastic_url="https://meshtastic.org/e/#CgMSAQESCAgBOAFAA0gB"
+ meshtastic_admin_key="**base64:**T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ="
+ meshtastic_legacy_admin="true"
-[!NOTE]
Enter as many or as few settings as you like.For wifi country, insert your country’s two letter code (such as CA or IN) in capital letters.
-For LoRa radio, choose your radio from the supported hardware list.
+Use a timezone as it appears in the tz database.
+Meshtastic
+For LoRa radio, choose your radio from the supported hardware list.
Options are:-
- ebyte-e22-900m30sm
@@ -36,10 +49,12 @@ Options are:- seeed-wio-sx1262
- waveshare-sx126x-xxxm
- ai-thinker-ra-01sh
+- none (for simradio)
For timezone, use a timezone as it appears in the tz database.
+You cannot set URL and security settings in the same operation - if you must set both, set the URL first, then edit the femtofox-config.txt file on the USB drive to remove the URL and add in your security settings.
+Clearing the admin key list: The admin key list can contain up to three keys - if more are added they will be ignored. The USB configuration tool supports clearing the admin key list, after which you will need to re-add your admin key/s in a second operation.
To apply your configuration, reboot the Femtofox with the USB drive plugged in. No other USB drives can be plugged in at the same time.
+
To apply your configuration, reboot the Femtofox with the USB drive plugged in. No other USB drives can be plugged in at the same time.
When the Femtofox is finished booting, it will blink its User LED (see below) in a pattern which can be used to gather info on its status or help diagnose issues.