diff --git a/foxbuntu_install.md b/foxbuntu_install.md index bb86aac..2f22aaa 100644 --- a/foxbuntu_install.md +++ b/foxbuntu_install.md @@ -5,10 +5,10 @@ To install Foxbuntu, you'll need the following: 1. microSD card. You can select one from [supported hardware](supported_hardware.md), but any card over 8gb and supporting UHS-I *should* work 2. microSD card reader for your computer 3. A method to configure the Fox: - * With any model, a USB OTG adapter (USB-C to USB-A) and a USB flash drive, OR - * With a Femtofox Pro, a USB-C cable to connect the Fox to your computer, OR - * With any model, a USB UART serial adapter to connect to UART2 (serial debug pins), OR - * With any model with an ethernet port, an ethernet cable + * USB OTG adapter (USB-C to USB-A) and a USB flash drive, OR + * USB-C cable to connect the Fox to your computer (Femtofox Pro only), OR + * USB UART serial adapter connected to UART2 (serial debug pins), OR + * An ethernet cable (models with ethernet port) 4. A Femtofox (duh!) ### Installation instructions @@ -17,7 +17,7 @@ To install Foxbuntu, you'll need the following: 3. Insert the microSD card into the Luckfox Pico Mini. The microSD slot is on the back of the board. 4. Configure the Femtofox using one of the following methods: * For USB config, following the instructions on the [USB Configuration Tool](usb_config.md) page, prepare your USB flash drive with your desired settings. Using a USB OTG adapter, plug the USB flash drive into the *data* USB port (the port on the Luckfox. - * On Femtofox Pro, connect the *Power USB-C port* to your PC with a cable, and open a serial console application such as PuTTY for windows. Select your the Femtofox's COM port (find the correct COM port in Windows hitting WIN+R and entering `cmd /k wmic path Win32_SerialPort get DeviceID, Description && pause`. The port should be named + * On Femtofox Pro, connect the *Power USB-C port* to your PC with a cable, and open a serial console application such as PuTTY for windows. Select your the Femtofox's COM port (find the correct COM port in Windows hitting WIN+R and entering `cmd /k wmic path Win32_SerialPort get DeviceID, Description && pause`. The port should be named "USB-SERIAL CH340". * Use a USB UART serial adapter to connect to UART2 (serial debug pins). * Use an ethernet cable and SSH in. Femtofox's default hostname is femtofox.local. 5. Connect the Femtofox to power, either via the *power USB-C port* (Pro model only, on the same side as the ethernet port) or via the power-in JST power plug. @@ -26,5 +26,5 @@ To install Foxbuntu, you'll need the following: * Username: `femto` * Password: `fox` \ No newline at end of file