From f0df3a3a349dbcbc2c1c0634b309e683d1133a72 Mon Sep 17 00:00:00 2001
From: noon92 <40807970+noon92@users.noreply.github.com>
Date: Fri, 24 Jan 2025 18:31:00 +0200
Subject: [PATCH] foxbuntu_install.md updated from https://stackedit.io/
---
foxbuntu_install.md | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/foxbuntu_install.md b/foxbuntu_install.md
index bb86aac..2f22aaa 100644
--- a/foxbuntu_install.md
+++ b/foxbuntu_install.md
@@ -5,10 +5,10 @@ To install Foxbuntu, you'll need the following:
1. microSD card. You can select one from [supported hardware](supported_hardware.md), but any card over 8gb and supporting UHS-I *should* work
2. microSD card reader for your computer
3. A method to configure the Fox:
- * With any model, a USB OTG adapter (USB-C to USB-A) and a USB flash drive, OR
- * With a Femtofox Pro, a USB-C cable to connect the Fox to your computer, OR
- * With any model, a USB UART serial adapter to connect to UART2 (serial debug pins), OR
- * With any model with an ethernet port, an ethernet cable
+ * USB OTG adapter (USB-C to USB-A) and a USB flash drive, OR
+ * USB-C cable to connect the Fox to your computer (Femtofox Pro only), OR
+ * USB UART serial adapter connected to UART2 (serial debug pins), OR
+ * An ethernet cable (models with ethernet port)
4. A Femtofox (duh!)
### Installation instructions
@@ -17,7 +17,7 @@ To install Foxbuntu, you'll need the following:
3. Insert the microSD card into the Luckfox Pico Mini. The microSD slot is on the back of the board.
4. Configure the Femtofox using one of the following methods:
* For USB config, following the instructions on the [USB Configuration Tool](usb_config.md) page, prepare your USB flash drive with your desired settings. Using a USB OTG adapter, plug the USB flash drive into the *data* USB port (the port on the Luckfox.
- * On Femtofox Pro, connect the *Power USB-C port* to your PC with a cable, and open a serial console application such as PuTTY for windows. Select your the Femtofox's COM port (find the correct COM port in Windows hitting WIN+R and entering `cmd /k wmic path Win32_SerialPort get DeviceID, Description && pause`. The port should be named
+ * On Femtofox Pro, connect the *Power USB-C port* to your PC with a cable, and open a serial console application such as PuTTY for windows. Select your the Femtofox's COM port (find the correct COM port in Windows hitting WIN+R and entering `cmd /k wmic path Win32_SerialPort get DeviceID, Description && pause`. The port should be named "USB-SERIAL CH340".
* Use a USB UART serial adapter to connect to UART2 (serial debug pins).
* Use an ethernet cable and SSH in. Femtofox's default hostname is femtofox.local.
5. Connect the Femtofox to power, either via the *power USB-C port* (Pro model only, on the same side as the ethernet port) or via the power-in JST power plug.
@@ -26,5 +26,5 @@ To install Foxbuntu, you'll need the following:
* Username: `femto`
* Password: `fox`
\ No newline at end of file