From f6752c875b5a48745cd7d9e317b331f6180c03c0 Mon Sep 17 00:00:00 2001 From: "holocron.so" Date: Fri, 24 Jan 2025 15:50:44 +0000 Subject: [PATCH] Update `usb_config.md` --- usb_config.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/usb_config.md b/usb_config.md index 89fae3f..fce93e9 100644 --- a/usb_config.md +++ b/usb_config.md @@ -80,9 +80,9 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in | LED blink pattern | Meaning | Possible causes | Solutions | | ------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | |
⚠️
\_______________\_
1 very long blink, lasting 5 seconds | Failed to mount USB drive. Ignoring. |
  • Invalid filesystem
  • Corrupted partition table
  • Defective USB drive
  • Defective USB OTG adapter |
  • Use a supported partition (FAT32, exFAT, NTFS, ext4)
  • Repair partition table
  • Try another USB drive
  • Try another USB OTG adapter | -|
    ⚠️
    \____\_  \____\_
    2 long blinks, each lasting 1.5 seconds | femtofox-config.txt is configured to skip if log exists. | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt | -|
    ⚠️
    \____\_  \____\_  \____\_
    3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. | -|
    ⚠️
    \____\_  \____\_  \____\_  \____\_  \____\_
    5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. | +|
    ⚠️
    \_**_\_  \__**\_
    2 long blinks, each lasting 1.5 seconds | femtofox-config.txt is configured to skip if log exists. | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt | +|
    ⚠️
    \_**_\_  \__**\_  \____\_
    3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring. | Config file missing. | Create configuration file as described above. | +|
    ⚠️
    \_**_\_  \__**\_  \_**_\_  \__**\_  \____\_
    5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring. | Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. | |
    ⚠️
    \__\_  \__\_  \_  \_  \__\_  \__\_  \_  \_
    2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully. |
  • The error may be transient.
  • Configuration file may contain improper data. |
  • Try again.
  • Check configuration file contents as described above.
  • Check the log.

    This pattern may flash before other patterns. The pattern will repeat once for each failed setting. | |
    ✅
    . . . . . . . . . .
    10 very fast blinks, each lasting 1/8th of a second | USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive. | This does not mean that the information in the config file is correct - only that it was readable.
    Note that the "success" boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully. | | |
    ✅
    \_\_  \_\_  \_\_  \_\_  \_\_
    5 medium blinks, each lasting 0.5 seconds | Boot complete. Appears on every successful boot and always appears last. | | |