From fe72a7e70dd00f8fdf747a07e47b5a112d98310a Mon Sep 17 00:00:00 2001
From: noon92 <40807970+noon92@users.noreply.github.com>
Date: Tue, 26 Nov 2024 00:22:13 +0200
Subject: [PATCH] README.md updated from https://stackedit.io/
---
README.md | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/README.md b/README.md
index e23a348..1469ab2 100644
--- a/README.md
+++ b/README.md
@@ -65,7 +65,7 @@
Reboot timing is set in crontab. Time logic is in /etc/rc.local.
-Networking
+Networking:
There are four methods to get online:
- Ethernet over USB - most adapters should be supported, but I’ve only tested the RTL8152 chipset.
@@ -73,7 +73,7 @@
- USB wifi - still a work in progress, but working with a couple different chipsets so far. Note we’re using wpa_supplicant, as networkmanager (nmcli) caused hard crashes.
- RDNIS via usb - see this guide. Note that in the preconfigured images USB is set to host mode, so you’ll have to switch back to peripheral with
sudo luckfox-config. This is not really recommended, but can be used in a pinch.
-Installation - connection to Meshtastic node via UART or USB
+Installation - connection to Meshtastic node via UART or USB:
Choosing a MicroSD card: Any reasonably fast MicroSD card of 32gb or higher should work, but ideally use a card that supports UHS-1 or higher, and is rated for high endurance.
- Uncompress the 7z file - will require ~29gb of space. In Windows, use 7-zip.
@@ -105,7 +105,7 @@
- It should Just Work.
- You can connect to the Luckfox via ethernet or UART serial as described here.
-Pinout
+Pinout: