diff --git a/mkdocs/docs/faq/configuration_and_policies.md b/mkdocs/docs/faq/configuration_and_policies.md
index 6bfba4d1..c7e6156c 100644
--- a/mkdocs/docs/faq/configuration_and_policies.md
+++ b/mkdocs/docs/faq/configuration_and_policies.md
@@ -18,6 +18,12 @@ mergerfs [does not impact](usage_and_functionality.md) the underlying
 filesystems and can be added or removed without any impact it is
 extremely easy to test and experiment with different settings.
 
+[mergerfs-webui](../tooling.md#mergerfs-webui) provides a browser-based
+way to inspect and change settings, branches, and policies on Linux,
+and edit startup configuration. It does not replace understanding
+what the options do or choosing policies suited to your use case.
+Runtime changes alone do not persist across remounts.
+
 Additional reading:
 
 * [Config/Options](../config/options.md)
diff --git a/mkdocs/docs/faq/downsides.md b/mkdocs/docs/faq/downsides.md
new file mode 100644
index 00000000..8233d52f
--- /dev/null
+++ b/mkdocs/docs/faq/downsides.md
@@ -0,0 +1,218 @@
+# Downsides
+
+## What are the downsides of using mergerfs?
+
+mergerfs trades the features of an integrated storage system for the
+flexibility of pooling independent filesystems. It is a filesystem
+proxy, not RAID or a replacement for the underlying filesystems.
+
+Some limitations are inherent to that design; others matter only for
+particular workloads, configurations, or applications. Many can be
+mitigated with appropriate settings or separate tools. The following
+is a checklist of tradeoffs to evaluate, not a list of problems every
+installation will experience.
+
+### No built-in data protection or storage management
+
+mergerfs does not provide redundancy, parity, integrity checks,
+snapshots, or file versioning. If a drive fails, mergerfs cannot
+recover the files on it. The other drives retain their independent
+filesystems, but that failure isolation is not redundancy or a backup.
+Protection must come from the underlying storage or separate tools,
+such as [SnapRAID](https://www.snapraid.it) or
+[NonRAID](https://github.com/qvr/nonraid).
+
+It also does not automatically rebalance existing files when a branch
+is added or space usage changes. If redistribution is needed, it must
+be done separately.
+
+See [Non-features](../index.md#non-features), [Project
+Comparisons](../project_comparisons.md), and [How can I balance files
+across the pool?](configuration_and_policies.md#how-can-i-balance-files-across-the-pool).
+
+### No striping or contiguous pooled space
+
+Each file lives entirely on one branch. Adding drives does not make a
+single-file transfer faster, and a file must fit on one eligible
+branch even if the pool reports enough total free space. For example,
+two filesystems with 6GiB free each cannot hold one 10GiB file.
+Concurrent access to different branches can still provide aggregate
+throughput.
+
+See [Project Comparisons](../project_comparisons.md#raid0-jbod-span-drive-concatenation-striping)
+and [Performance](../performance.md#understanding-mergerfs-io-performance).
+
+### Performance overhead
+
+Filesystem requests generally pass through FUSE and the mergerfs
+process before reaching the underlying filesystem. This adds latency
+and CPU overhead compared to direct access. Directory listings and
+other metadata operations can require work across multiple branches,
+so their cost can grow as the pool grows. Page caching can also result
+in data being cached both through mergerfs and on the underlying
+filesystem.
+
+[IO passthrough](../config/passthrough.md) can reduce data IO overhead,
+but does not eliminate the work of combining branches. Databases, VM
+images, and other latency-sensitive workloads should be benchmarked
+with the intended configuration rather than assumed to perform like
+direct access.
+
+There is also memory overhead beyond page caching: request buffers,
+temporary directory buffers, and FUSE node bookkeeping. Usage depends
+on concurrency, buffer sizes, and the workload. Exporting the pool
+over NFS requires retaining nodes with `never-forget-nodes=true`,
+which can increase memory usage as more entries are accessed. This is
+worth considering on memory-constrained systems or large NFS exports.
+See [Resource Usage](../resource_usage.md) and [NFS exporting
+mergerfs](../remote_filesystems.md#nfs-exporting-mergerfs).
+
+See [Understanding mergerfs IO
+Performance](../performance.md#understanding-mergerfs-io-performance),
+[Benchmarking](../benchmarking.md), and [Why use
+FUSE?](technical_behavior_and_limitations.md#why-use-fuse-why-not-a-kernel-based-solution).
+
+### Placement and filesystem semantics need attention
+
+A single mount point does not make the branches one filesystem.
+[Policies](../config/functions_categories_policies.md) determine where
+new files go and which copy is used when the same path exists on
+multiple branches. Path-preserving policies and
+[minfreespace](../config/minfreespace.md) can exclude branches from file
+creation even while the pool has free space. mergerfs cannot know a
+file's final size when it is created.
+
+Hard links and renames still have underlying filesystem constraints.
+Depending on the layout and policies, an operation can return `EXDEV`
+(cross-device link) even within the pool. Applications which do not
+handle that error may fail rather than fall back to copying.
+
+Directory metadata is also selected by policy rather than necessarily
+aggregated. With the default `getattr` policy of `ff`, a directory's
+timestamp comes from the first matching branch. A media scanner which
+uses that timestamp to skip unchanged directories can miss updates on
+another branch. `func.getattr=newest` can help with timestamp-based
+scans, but changes which branch supplies metadata; it does not change
+which file other operations select.
+
+Corresponding directories on different branches can have different
+ownership or permissions. Since access uses the caller's credentials,
+this can result in unexpected access errors or missing entries.
+Keeping those permissions consistent and auditing with
+`fsck.mergerfs` helps. Container UID/GID mappings and non-POSIX
+branches may need additional attention; mergerfs does not bypass
+their access restrictions.
+
+See [Configuration and Policies](configuration_and_policies.md),
+[rename and link](../config/rename_and_link.md), [Tips and
+Notes](../tips_notes.md), and [How does mergerfs interact with user
+namespaces?](compatibility_and_integration.md#how-does-mergerfs-interact-with-user-namespaces).
+
+### Keeping drives spun down can be harder
+
+Directory listings and file searches can query multiple branches,
+potentially waking drives beyond the one containing the requested
+file. If keeping disks asleep is important, this can increase power
+usage, noise, and access latency. It is not a concern for SSDs or
+drives which are kept spinning.
+
+Caching and reducing background scans can limit some branch access,
+but mergerfs alone cannot guarantee that unused disks stay asleep.
+See [Limiting drive spinup](limit_drive_spinup.md) for the tradeoffs
+and possible approaches.
+
+### Direct branch changes and cached views
+
+Using the underlying filesystems directly is supported, but changes
+made outside the mergerfs mount are not forwarded as `inotify` or
+`fanotify` events to applications watching the pool. Changes made
+through the pool do generate notifications. If files are added
+directly to branches, applications such as media servers may need
+periodic scans, explicit refreshes, or watches on the branches
+themselves.
+
+Metadata caching introduces a separate visibility tradeoff: direct
+branch changes may not appear through the pool until cached entries
+expire. Longer cache durations can reduce filesystem queries at the
+cost of less immediate visibility. Shorter durations or disabling the
+relevant caches can help if direct branch changes are common. Avoid
+uncoordinated writes to the same file through both paths, especially
+when file caching is enabled.
+
+See [Does inotify and fanotify
+work?](compatibility_and_integration.md#does-inotify-and-fanotify-work),
+[Can filesystems still be used
+directly?](usage_and_functionality.md#can-filesystems-still-be-used-directly-outside-of-mergerfs-while-pooled),
+and [Caching](../config/cache.md).
+
+### Branch paths do not guarantee a particular disk is mounted
+
+mergerfs works on paths and does not require each branch to be a
+mount point. If an intended branch filesystem is not mounted but its
+mount-point directory still exists, mergerfs can use that directory
+on the filesystem beneath it. If writable and selected for creation,
+new files can land there instead of on the intended disk, potentially
+filling the root filesystem.
+
+This is a deployment concern when pooling mounted filesystems, not a
+problem with intentionally using ordinary directories as branches.
+Configure mount dependencies or
+`branches-mount-timeout` with `branches-mount-timeout-fail=true` if
+startup should fail when branches are not ready. These are startup
+safeguards, not continuous checks that the intended disks remain
+mounted at runtime.
+
+See [branches-mount-timeout](../config/branches-mount-timeout.md) and
+[What happens if a filesystem disappears at
+runtime?](usage_and_functionality.md#what-happens-if-a-filesystem-disappears-at-runtime).
+
+### Dependence on branch responsiveness
+
+mergerfs cannot make an unresponsive disk or remote filesystem
+responsive. A request to a blocked branch blocks the thread handling
+it. If enough threads are blocked, the pool can stop responding as
+well. Independent on-disk filesystems do not guarantee that a failing
+branch has no effect on access through the pool.
+
+See [What happens if a branch filesystem
+blocks?](technical_behavior_and_limitations.md#what-happens-if-a-branch-filesystem-blocks).
+
+### Compatibility limitations
+
+Some filesystem features are unavailable through FUSE or require
+particular kernel versions and settings. For example, reflink requests
+(`FICLONE` / `FICLONERANGE`) are not supported through the mergerfs
+mount. Applications using `mmap` need page caching; older Linux or
+mergerfs versions require it to be explicitly enabled.
+
+Advisory locks taken through the pool are not forwarded to the
+underlying branches. Local applications using only the mergerfs mount
+still have kernel-managed locks, but those locks do not coordinate
+with direct branch access or other hosts accessing a remote branch.
+
+Inode identity also has tradeoffs when presenting multiple filesystems
+as one. Most applications do not need special settings, but backup or
+deduplication tools and NFS can be sensitive to inode values changing
+when files move between branches or a policy selects a different
+copy. [inodecalc](../config/inodecalc.md) offers different strategies:
+for example, `path-hash` stabilizes identity by path for NFS, but
+prevents applications from recognizing hard links by inode equality.
+The hard links themselves still work.
+
+On SELinux systems, per-file relabeling is unavailable through the
+FUSE mount, so container bind-mount options `:z` and `:Z` do not
+perform their usual relabeling. This does not mean containers cannot
+use the pool: an appropriate SELinux policy or a mount-wide context
+can allow access. A mount-wide context is not a substitute for
+distinct per-file labels if the application requires them. See [Does
+mergerfs work with SELinux
+relabeling?](compatibility_and_integration.md#does-mergerfs-work-with-selinux-relabeling).
+
+See [Technical Behavior and
+Limitations](technical_behavior_and_limitations.md) and [Known Issues
+and Bugs](../known_issues_bugs.md).
+
+These tradeoffs do not require migrating data into a special format.
+The underlying filesystems remain usable without mergerfs, and
+mergerfs can be [removed without changing their
+data](usage_and_functionality.md#can-mergerfs-be-removed-without-affecting-the-data).
diff --git a/mkdocs/docs/faq/why_isnt_it_working.md b/mkdocs/docs/faq/why_isnt_it_working.md
index bc4f46b8..0d1560bf 100644
--- a/mkdocs/docs/faq/why_isnt_it_working.md
+++ b/mkdocs/docs/faq/why_isnt_it_working.md
@@ -119,7 +119,7 @@ may be able to read some files and directories on one filesystem but
 not another resulting in an incomplete set. And if one of the branches
 it can access is empty then it will return an empty list.
 
-Try using [mergerfs.fsck](https://github.com/trapexit/mergerfs-tools)
+Try using [fsck.mergerfs](../tooling.md#fsckmergerfs)
 tool to check for and fix inconsistencies in permissions. If you
 aren't seeing anything at all be sure that the basic permissions are
 correct. The user and group values are correct and that directories
diff --git a/mkdocs/docs/quickstart.md b/mkdocs/docs/quickstart.md
index 374d97c8..a406795c 100644
--- a/mkdocs/docs/quickstart.md
+++ b/mkdocs/docs/quickstart.md
@@ -62,6 +62,17 @@ For some suggestions on branch setup see [the page on
 branches](config/branches.md#branch-setup).
 
 
+### Web UI
+
+[mergerfs-webui](tooling.md#mergerfs-webui) provides a browser-based
+alternative for creating and managing mounts on Linux. It can edit
+startup configuration and inspect and change settings on running
+mounts. See the
+[mergerfs-webui documentation](https://github.com/trapexit/mergerfs-webui#readme)
+for installation and secure access guidance. Runtime changes alone do
+not persist across remounts.
+
+
 ### Command Line
 
 ```
diff --git a/mkdocs/docs/related_projects.md b/mkdocs/docs/related_projects.md
index f40bb768..139e8cda 100644
--- a/mkdocs/docs/related_projects.md
+++ b/mkdocs/docs/related_projects.md
@@ -23,6 +23,9 @@
 
 ## Software and services commonly used with mergerfs
 
+* [mergerfs-webui](tooling.md#mergerfs-webui): a browser-based tool for
+  managing mergerfs mounts, runtime settings, and startup configuration
+  on Linux.
 * [snapraid](https://www.snapraid.it): a backup program designed for
   disk arrays, storing parity information for data recovery in the
   event of up to six disk failures.
diff --git a/mkdocs/docs/runtime_interface.md b/mkdocs/docs/runtime_interface.md
index 3230cbf4..8e1bf9df 100644
--- a/mkdocs/docs/runtime_interface.md
+++ b/mkdocs/docs/runtime_interface.md
@@ -14,6 +14,11 @@ getting and setting config and issuing certain commands. The other are
 files found on the filesystem for querying certain `mergerfs` specific
 information about them.
 
+For a browser-based interface to inspect and change runtime settings,
+manage branches and policies, and issue commands, see
+[mergerfs-webui](tooling.md#mergerfs-webui). Runtime changes still need
+to be saved in startup configuration if they should persist.
+
 
 ## .mergerfs pseudo file
 
diff --git a/mkdocs/docs/tips_notes.md b/mkdocs/docs/tips_notes.md
index 289f8a61..3faf5509 100644
--- a/mkdocs/docs/tips_notes.md
+++ b/mkdocs/docs/tips_notes.md
@@ -14,7 +14,8 @@
 * If you do not see some directories and files you expect, policies
   seem to skip branches, you get strange permission errors, etc. be
   sure the underlying filesystems' permissions are all the same. Use
-  `mergerfs.fsck` to audit the filesystem for out of sync permissions.
+  [fsck.mergerfs](tooling.md#fsckmergerfs) to audit the filesystem for
+  out of sync permissions.
 * If you still have permission issues be sure you are using POSIX
   compliant filesystems. mergerfs doesn't generally make exceptions
   for FAT, NTFS, or other non-POSIX filesystem.
diff --git a/mkdocs/docs/tooling.md b/mkdocs/docs/tooling.md
index f83a0c8c..0f5d0e93 100644
--- a/mkdocs/docs/tooling.md
+++ b/mkdocs/docs/tooling.md
@@ -1,5 +1,28 @@
 # Tooling
 
+## mergerfs-webui
+
+[mergerfs-webui](https://github.com/trapexit/mergerfs-webui) is a
+browser-based tool for viewing and managing mergerfs mounts on Linux.
+It is a separate project with a single executable containing both the
+web server and the web page.
+
+It can:
+
+* Install mergerfs and create mounts through `/etc/fstab` or systemd
+  `.mount` units.
+* Discover running mounts, mount and unmount them, and inspect and
+  change their runtime settings, branches, and policies.
+* Edit startup configuration in `/etc/fstab`, systemd `.mount` units,
+  and referenced mergerfs ini files, with previews of structured
+  changes before saving.
+* Issue runtime commands and set up the web UI as a systemd service.
+
+[Runtime changes](runtime_interface.md) are not automatically
+persistent; startup configuration must also be updated if changes
+should survive a remount.
+
+
 ## mergerfs.collect-info
 
 A tool included in recent releases of `mergerfs` which collects
@@ -161,8 +184,6 @@ Environment=LD_PRELOAD=/usr/lib/mergerfs/preload.so
       behaviors that can be build on top of mergerfs. They may not
       have all the features you are looking for.**
     * mergerfs.ctl: A tool to make it easier to query and configure mergerfs at runtime
-    * mergerfs.fsck: Provides permissions and ownership auditing and
-      the ability to fix them (should use `fsck.mergerfs` instead)
     * mergerfs.dedup: Will help identify and optionally remove duplicate files
     * mergerfs.dup: Ensure there are at least N copies of a file across the pool
     * mergerfs.balance: Rebalance files across filesystems by moving them from the most filled to the least filled
diff --git a/mkdocs/mkdocs.yml b/mkdocs/mkdocs.yml
index a8fc518c..82242318 100644
--- a/mkdocs/mkdocs.yml
+++ b/mkdocs/mkdocs.yml
@@ -115,6 +115,7 @@ nav:
   - faq/compatibility_and_integration.md
   - faq/technical_behavior_and_limitations.md
   - faq/have_you_considered.md
+  - faq/downsides.md
   - faq/limit_drive_spinup.md
 - Related Projects: related_projects.md
 - Media and Publicity: media_and_publicity.md