ⓘ To use the I2P interface, you must have an I2P router running on your system. When the I2P Interface is added for the first time Reticulum will generate a new I2P address for the interface and begin listening for inbound traffic.
Selected Frequency: {{ formattedFrequency }}
ⓘ The RNode Multi Interface is used for custom devices with multiple LoRa transceivers such as the openCom XL.
ⓘ Enables AX.25 Framing
ⓘ Using this interface, Reticulum can use any program as an interface via stdin and stdout. This can be usedto easily create virtual interfaces, or to interface with custom hardware or other systems.
Optional AutoInterface Settings
Optional TCPClientInterface Settings
Enable this when connecting to software that uses KISS framing such as packet radio sound modems. For KISS connections through serial hardware select "KISS Interface" as the interface type.
Enables tunnelling through an I2P Connection using the TCPClientInterface
Optional {{ newInterfaceType }} settings
Binds the interface to a specific network interface
Binds the TCP Server Interface to an IPv6 address
Optional RNodeInterface Settings
Calculated On-Air RNode Bitrate & Link Budget
ⓘ A stub or PCB antenna might have around 1 dBi of gain, where a directional Yagi might have 5 dBi of gain.
On-Air Calculations
Sensitivity
{{ RNodeInterfaceLoRaParameters.sensitivity }}
Data Rate
{{ RNodeInterfaceLoRaParameters.dataRate }}
Link Budget
{{ RNodeInterfaceLoRaParameters.linkBudget }}
Common Interface Settings
IFAC Settings
Interface Access Code settings are used for creating private networks and can be configured on the interface level.