Add support for custom smartctl info options using a [info: ...] tag

HISTORY

@@ -41,6 +41,11 @@ SnapRAID HISTORY
    non-FHS systems.
  * Removed the 512 TiB limitation on hard disk size (when using the
    default 128 KiB blocks).
+ * Added support for a custom info options tag `[info: ...]` in the
+   `smartctl` configuration option. This allows replacing the default
+   `-a` command line argument used to retrieve SMART attributes with a
+   customized set of arguments, enabling better support for RAID
+   controllers and USB enclosures.
 
 14.10 2026/08
 =============

cmdline/app.h

@@ -289,7 +289,7 @@ extern int exit_sync_needed;
 /**
  * SMART max attribute length.
  */
-#define SMART_MAX 64
+#define SMART_MAX 128
 
 /**
  * Value for unassigned SMART attribute.
@@ -330,7 +330,8 @@ struct devinfo_struct {
 	uint64_t device; /**< Device ID. */
 	char name[PATH_MAX]; /**< Name of the disk combined with the split index if any */
 	char mount[PATH_MAX]; /**< Mount point or other contained directory. */
-	char smartctl[PATH_MAX]; /**< Options for smartctl. */
+	char smartctl[SMART_MAX]; /**< Custom option for smartctl. Empty means auto. */
+	char smartctl_info[SMART_MAX]; /* Info options for smartctl. Empty means -a. */
 	int smartignore[SMART_IGNORE_MAX]; /**< Attribues to ignore */
 	char file[PATH_MAX]; /**< File device. */
 #ifdef _WIN32

cmdline/device.c

@@ -1051,6 +1051,7 @@ int state_device(struct snapraid_state* state, int operation, tommy_list* filter
 		device_name_set(entry, disk->name, 0);
 		pathcpy(entry->mount, sizeof(entry->mount), disk->dir);
 		pathcpy(entry->smartctl, sizeof(entry->smartctl), disk->smartctl);
+		pathcpy(entry->smartctl_info, sizeof(entry->smartctl_info), disk->smartctl_info);
 		memcpy(entry->smartignore, disk->smartignore, sizeof(entry->smartignore));
 
 		tommy_list_insert_tail(&high, &entry->node, entry);
@@ -1078,6 +1079,7 @@ int state_device(struct snapraid_state* state, int operation, tommy_list* filter
 			device_name_set(entry, lev_config_name(j), s);
 			pathcpy(entry->mount, sizeof(entry->mount), state->parity[j].split_map[s].path);
 			pathcpy(entry->smartctl, sizeof(entry->smartctl), state->parity[j].smartctl);
+			pathcpy(entry->smartctl_info, sizeof(entry->smartctl_info), state->parity[j].smartctl_info);
 			memcpy(entry->smartignore, state->parity[j].smartignore, sizeof(entry->smartignore));
 			pathcut(entry->mount); /* remove the parity file */
 
@@ -1109,7 +1111,8 @@ int state_device(struct snapraid_state* state, int operation, tommy_list* filter
 			device_name_set(entry, extra->name, 0);
 			pathcpy(entry->mount, sizeof(entry->mount), extra->dir);
 			pathcpy(entry->smartctl, sizeof(entry->smartctl), extra->smartctl);
-			memcpy(entry->smartignore, extra->smartignore, sizeof(extra->smartignore));
+			pathcpy(entry->smartctl_info, sizeof(entry->smartctl_info), extra->smartctl_info);
+			memcpy(entry->smartignore, extra->smartignore, sizeof(entry->smartignore));
 
 			tommy_list_insert_tail(&high, &entry->node, entry);
 		}

cmdline/elem.c

@@ -843,6 +843,7 @@ struct snapraid_disk* disk_alloc(const char* name, const char* dir, uint64_t dev
 #endif
 
 	disk->smartctl[0] = 0;
+	disk->smartctl_info[0] = 0;
 	for (i = 0; i < SMART_IGNORE_MAX; ++i)
 		disk->smartignore[i] = 0;
 	disk->fstype[0] = 0;
@@ -915,6 +916,7 @@ struct snapraid_extra* extra_alloc(const char* name, const char* dir, uint64_t d
 	pathslash(extra->dir, sizeof(extra->dir));
 
 	extra->smartctl[0] = 0;
+	extra->smartctl_info[0] = 0;
 	for (i = 0; i < SMART_IGNORE_MAX; ++i)
 		extra->smartignore[i] = 0;
 	extra->fstype[0] = 0;

cmdline/elem.h

@@ -343,7 +343,8 @@ struct snapraid_extent {
 struct snapraid_extra {
 	char name[PATH_MAX]; /**< Name of the disk. */
 	char dir[PATH_MAX]; /**< Mount point of the disk. It always terminates with /. */
-	char smartctl[PATH_MAX]; /**< Custom command for smartctl. Empty means auto. */
+	char smartctl[SMART_MAX]; /**< Custom option for smartctl. Empty means auto. */
+	char smartctl_info[SMART_MAX]; /* Info options for smartctl. Empty means -a. */
 	int smartignore[SMART_IGNORE_MAX]; /**< Smart attributes to ignore for this device. */
 	char uuid[UUID_MAX]; /**< UUID of the disk. They are probed during the config reading. */
 	char fstype[FSINFO_MAX]; /**< Filesystem type */
@@ -381,7 +382,8 @@ struct snapraid_disk {
 	 */
 	struct fssnapshot_struct fss;
 
-	char smartctl[PATH_MAX]; /**< Custom command for smartctl. Empty means auto. */
+	char smartctl[SMART_MAX]; /**< Custom option for smartctl. Empty means auto. */
+	char smartctl_info[SMART_MAX]; /* Info options for smartctl. Empty means -a. */
 	int smartignore[SMART_IGNORE_MAX]; /**< Smart attributes to ignore for this device. */
 	char uuid[UUID_MAX]; /**< UUID of the disk. They are probed during the config reading. */
 	char fstype[FSINFO_MAX]; /**< Filesystem type */
@@ -534,7 +536,8 @@ struct snapraid_split {
 struct snapraid_parity {
 	struct snapraid_split split_map[SPLIT_MAX]; /**< Parity splits. */
 	unsigned split_mac; /**< Number of parity splits. */
-	char smartctl[PATH_MAX]; /**< Custom command for smartctl. Empty means auto. */
+	char smartctl[SMART_MAX]; /**< Custom option for smartctl. Empty means auto. */
+	char smartctl_info[SMART_MAX]; /* Info options for smartctl. Empty means -a. */
 	int smartignore[SMART_IGNORE_MAX]; /**< Smart attributes to ignore for this device. */
 	block_off_t total_blocks; /**< Number of total blocks. */
 	block_off_t free_blocks; /**< Number of free blocks at the last sync. */

cmdline/mingwapp.c

@@ -241,10 +241,10 @@ static int devstat(uint64_t device, const char* name, const char* wfile, uint64_
 /**
  * Get SMART attributes.
  */
-static int devsmart(uint64_t device, const char* name, const char* smartctl, struct smart_attr* smart, uint64_t* info, char* serial, char* family, char* model, char* inter)
+static int devsmart(uint64_t device, const char* name, const char* smartctl, const char* smartctl_info, struct smart_attr* smart, uint64_t* info, char* serial, char* family, char* model, char* inter)
 {
 	char conv_buf[CONV_MAX];
-	WCHAR cmd[PATH_MAX + 128];
+	WCHAR cmd[PATH_MAX + SMART_MAX];
 	char file[128];
 	FILE* f;
 	int ret;
@@ -252,13 +252,15 @@ static int devsmart(uint64_t device, const char* name, const char* smartctl, str
 
 	snprintf(file, sizeof(file), "/dev/pd%" PRIu64, device);
 
+	const char* info_opts = smartctl_info[0] ? smartctl_info : "-a";
+
 	/* if there is a custom smartctl command */
 	if (smartctl[0]) {
-		char option[128];
+		char option[SMART_MAX];
 		snprintf(option, sizeof(option), smartctl, file);
-		snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" -a %s", windows_exedir(), option);
+		snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" %s %s", windows_exedir(), info_opts, option);
 	} else {
-		snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" -a %s", windows_exedir(), file);
+		snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" %s %s", windows_exedir(), info_opts, file);
 	}
 
 	count = 0;
@@ -314,7 +316,7 @@ retry:
 			&& info[INFO_ROTATION_RATE] == SMART_UNASSIGNED
 		) {
 			/* retry using the "sat" type */
-			snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" -a -d sat %s", windows_exedir(), file);
+			snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" %s -d sat %s", windows_exedir(), info_opts, file);
 
 			++count;
 			goto retry;
@@ -563,10 +565,10 @@ static int devpower(uint64_t device, const char* name, const char* wfile)
 /**
  * Get POWER state
  */
-static int devprobe(uint64_t device, const char* name, const char* smartctl, int* power, struct smart_attr* smart, uint64_t* info, char* serial, char* family, char* model, char* interf)
+static int devprobe(uint64_t device, const char* name, const char* smartctl, const char* smartctl_info, int* power, struct smart_attr* smart, uint64_t* info, char* serial, char* family, char* model, char* interf)
 {
 	char conv_buf[CONV_MAX];
-	WCHAR cmd[PATH_MAX + 128];
+	WCHAR cmd[PATH_MAX + SMART_MAX];
 	char file[128];
 	FILE* f;
 	int ret;
@@ -574,13 +576,15 @@ static int devprobe(uint64_t device, const char* name, const char* smartctl, int
 
 	snprintf(file, sizeof(file), "/dev/pd%" PRIu64, device);
 
+	const char* info_opts = smartctl_info[0] ? smartctl_info : "-a";
+
 	/* if there is a custom smartctl command */
 	if (smartctl[0]) {
-		char option[128];
+		char option[SMART_MAX];
 		snprintf(option, sizeof(option), smartctl, file);
-		snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" -n standby,3 -a %s", windows_exedir(), option);
+		snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" -n standby,3 %s %s", windows_exedir(), info_opts, option);
 	} else {
-		snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" -n standby,3 -a %s", windows_exedir(), file);
+		snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" -n standby,3 %s %s", windows_exedir(), info_opts, file);
 	}
 
 	count = 0;
@@ -629,7 +633,7 @@ retry:
 		 */
 		if (ret == 2) {
 			/* retry using the "sat" type */
-			snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" -n standby,3 -a -d sat %s", windows_exedir(), file);
+			snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" -n standby,3 %s -d sat %s", windows_exedir(), info_opts, file);
 
 			++count;
 			goto retry;
@@ -657,7 +661,7 @@ retry:
 static int devdown(uint64_t device, const char* name, const char* smartctl)
 {
 	char conv_buf[CONV_MAX];
-	WCHAR cmd[PATH_MAX + 128];
+	WCHAR cmd[PATH_MAX + SMART_MAX];
 	char file[128];
 	FILE* f;
 	int ret;
@@ -667,7 +671,7 @@ static int devdown(uint64_t device, const char* name, const char* smartctl)
 
 	/* if there is a custom smartctl command */
 	if (smartctl[0]) {
-		char option[128];
+		char option[SMART_MAX];
 		snprintf(option, sizeof(option), smartctl, file);
 		snwprintf(cmd, sizeof(cmd), L"\"%lssmartctl.exe\" -s standby,now %s", windows_exedir(), option);
 	} else {
@@ -743,11 +747,11 @@ retry:
 /**
  * Spin down a specific device if it's up
  */
-static int devdownifup(uint64_t device, const char* name, const char* smartctl, int* power)
+static int devdownifup(uint64_t device, const char* name, const char* smartctl, const char* smartctl_info, int* power)
 {
 	*power = POWER_UNKNOWN;
 
-	if (devprobe(device, name, smartctl, power, 0, 0, 0, 0, 0, 0) != 0)
+	if (devprobe(device, name, smartctl, smartctl_info, power, 0, 0, 0, 0, 0, 0) != 0)
 		return -1;
 
 	if (*power == POWER_ACTIVE)
@@ -847,7 +851,7 @@ static void* thread_spinup(void* arg)
 	msg_status("Spunup device '%s' for disk '%s' in %" PRIu64 " ms.\n", devinfo->file, devinfo->name, os_tick_ms() - start);
 
 	/* after the spin up, get SMART info */
-	if (devsmart(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
+	if (devsmart(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smartctl_info, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
 		/* LCOV_EXCL_START */
 		return (void*)-1;
 		/* LCOV_EXCL_STOP */
@@ -900,7 +904,7 @@ static void* thread_spindownifup(void* arg)
 
 	start = os_tick_ms();
 
-	if (devdownifup(devinfo->device, devinfo->name, devinfo->smartctl, &power) != 0) {
+	if (devdownifup(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smartctl_info, &power) != 0) {
 		/* LCOV_EXCL_START */
 		return (void*)-1;
 		/* LCOV_EXCL_STOP */
@@ -919,7 +923,7 @@ static void* thread_smart(void* arg)
 {
 	devinfo_t* devinfo = arg;
 
-	if (devsmart(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
+	if (devsmart(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smartctl_info, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
 		/* LCOV_EXCL_START */
 		return (void*)-1;
 		/* LCOV_EXCL_STOP */
@@ -943,7 +947,7 @@ static void* thread_probe(void* arg)
 {
 	devinfo_t* devinfo = arg;
 
-	if (devprobe(devinfo->device, devinfo->name, devinfo->smartctl, &devinfo->power, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
+	if (devprobe(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smartctl_info, &devinfo->power, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
 		/* LCOV_EXCL_START */
 		return (void*)-1;
 		/* LCOV_EXCL_STOP */

cmdline/os.h

@@ -87,12 +87,10 @@ typedef struct OS_FILE {
  *
  * @param argv  A NULL-terminated array of strings representing the argument vector.
  *              argv[0] must contain the absolute path to the verified executable.
- * @param extra_args A mutable string containing additional arguments separated by
- *                   spaces, or NULL if no extra arguments are needed.
  * @return A pointer to an initialized OS_FILE structure on success, or NULL on failure.
  *         On failure, errno is set appropriately.
  */
-OS_FILE* os_popen(const char** argv, char* extra_args);
+OS_FILE* os_popen(const char** argv);
 
 /**
  * Reads a line from an OS execution stream.

cmdline/selftest.c

@@ -841,6 +841,97 @@ static void test_wnmatch(void)
 	}
 }
 
+static void test_parse_smartctl(void)
+{
+	char smartctl[SMART_MAX];
+	char smartctl_info[SMART_MAX];
+
+	/* empty default case */
+	if (parse_smartctl("smartctl d1 %s", smartctl, sizeof(smartctl), smartctl_info, sizeof(smartctl_info)) != 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl empty test 1\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+	if (strcmp(smartctl, "smartctl d1 %s") != 0 || smartctl_info[0] != 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl empty test 2\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+
+	if (parse_smartctl("smartctl d1 /dev/sda", smartctl, sizeof(smartctl), smartctl_info, sizeof(smartctl_info)) != 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl empty test 3\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+	if (strcmp(smartctl, "smartctl d1 /dev/sda") != 0 || smartctl_info[0] != 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl empty test 4\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+
+	/* basic default case */
+	if (parse_smartctl("smartctl d1 -d sat %s", smartctl, sizeof(smartctl), smartctl_info, sizeof(smartctl_info)) != 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl basic test 1\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+	if (strcmp(smartctl, "smartctl d1 -d sat %s") != 0 || smartctl_info[0] != 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl basic test 2\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+
+	/* case with [info: xxx] tag */
+	if (parse_smartctl("smartctl d1 [info: -H -i -A] -d sat %s", smartctl, sizeof(smartctl), smartctl_info, sizeof(smartctl_info)) != 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl info test 1\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+	if (strcmp(smartctl, "smartctl d1  -d sat %s") != 0 || strcmp(smartctl_info, "-H -i -A") != 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl info test 2\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+
+	/* case with spaces in tag */
+	if (parse_smartctl("smartctl d2 [info:  -H -I ] -d sat", smartctl, sizeof(smartctl), smartctl_info, sizeof(smartctl_info)) != 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl space test 1\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+	if (strcmp(smartctl, "smartctl d2  -d sat") != 0 || strcmp(smartctl_info, "-H -I") != 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl space test 2\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+
+	/* invalid case: multiple info tags */
+	if (parse_smartctl("smartctl [info: -H] [info: -i] %s", smartctl, sizeof(smartctl), smartctl_info, sizeof(smartctl_info)) == 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl multiple tags test\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+
+	/* invalid case: missing closing bracket */
+	if (parse_smartctl("smartctl [info: -H %s", smartctl, sizeof(smartctl), smartctl_info, sizeof(smartctl_info)) == 0) {
+		/* LCOV_EXCL_START */
+		log_fatal(EINTERNAL, "Failed parse_smartctl missing bracket test\n");
+		exit(EXIT_FAILURE);
+		/* LCOV_EXCL_STOP */
+	}
+}
+
 void selftest(void)
 {
 	log_tag("selftest:\n");
@@ -866,6 +957,7 @@ void selftest(void)
 	test_crc32c();
 	test_tommy();
 	test_wnmatch();
+	test_parse_smartctl();
 	if (raid_selftest() != 0) {
 		/* LCOV_EXCL_START */
 		log_fatal(EINTERNAL, "Failed SELF test\n");

cmdline/state.c

@@ -145,6 +145,7 @@ void state_init(struct snapraid_state* state)
 			state->parity[l].split_map[s].device = 0;
 		}
 		state->parity[l].smartctl[0] = 0;
+		state->parity[l].smartctl_info[0] = 0;
 		for (i = 0; i < SMART_IGNORE_MAX; ++i)
 			state->parity[l].smartignore[i] = 0;
 		state->parity[l].total_blocks = 0;
@@ -517,15 +518,75 @@ static void state_config_check(struct snapraid_state* state, const char* path, t
 }
 
 /**
- * Validate the smartctl command.
+ * Parse the smartctl command.
  *
- * It must contains only one %s string, and not other % chars.
+ * It extracts the optional [info: xxx] tag, validates, and returns
+ * the cleaned smartctl command and smartctl_info options.
  */
-static int validate_smartctl(const char* custom)
+int parse_smartctl(const char* custom, char* smartctl, size_t smartctl_size, char* smartctl_info, size_t smartctl_info_size)
 {
-	const char* s = custom;
+	const char* s;
+	const char* info_start = 0;
+	size_t info_len = 0;
+	size_t smartctl_len = 0;
 	int arg = 0;
 
+	/* initialize output buffers */
+	smartctl[0] = 0;
+	smartctl_info[0] = 0;
+
+	/* look for "[info:" */
+	s = custom;
+	while (*s) {
+		if (strncmp(s, "[info:", 6) == 0) {
+			if (info_start) {
+				/* multiple info tags not allowed */
+				return -1;
+			}
+
+			info_start = s;
+			s += 6;
+
+			/* skip spaces inside bracket */
+			while (isspace((unsigned char)*s))
+				++s;
+
+			/* find matching ']' */
+			const char* val_start = s;
+			while (*s && *s != ']')
+				++s;
+			if (*s != ']') {
+				/* missing closing bracket */
+				return -1;
+			}
+
+			/* trim trailing spaces inside bracket */
+			const char* val_end = s;
+			while (val_end > val_start && isspace((unsigned char)val_end[-1]))
+				--val_end;
+			info_len = val_end - val_start;
+			if (info_len >= smartctl_info_size) {
+				/* info string too long */
+				return -1;
+			}
+
+			memcpy(smartctl_info, val_start, info_len);
+			smartctl_info[info_len] = 0;
+			++s; /* skip ']' */
+		} else {
+			if (smartctl_len + 1 >= smartctl_size) {
+				return -1;
+			}
+			smartctl[smartctl_len++] = *s++;
+		}
+	}
+	smartctl[smartctl_len] = 0;
+
+	/* trim extra spaces from the smartctl options */
+	strtrim(smartctl);
+
+	/* validate the cleaned smartctl command */
+	s = smartctl;
 	while (*s) {
 		if (s[0] == '%' && s[1] == 's') {
 			if (arg) {
@@ -534,12 +595,23 @@ static int validate_smartctl(const char* custom)
 				/* LCOV_EXCL_STOP */
 			}
 			arg = 1;
+			++s;
 		} else if (s[0] == '%') {
 			/* LCOV_EXCL_START */
 			return -1;
 			/* LCOV_EXCL_STOP */
 		}
+		++s;
+	}
 
+	/* validate the smartctl_info command */
+	s = smartctl_info;
+	while (*s) {
+		if (s[0] == '%') {
+			/* LCOV_EXCL_START */
+			return -1;
+			/* LCOV_EXCL_STOP */
+		}
 		++s;
 	}
 
@@ -1094,6 +1166,8 @@ void state_config(struct snapraid_state* state, const char* path, const char* co
 			tommy_list_insert_tail(&state->extralist, &extra->node, extra);
 		} else if (strcmp(tag, "smartctl") == 0) {
 			char custom[PATH_MAX];
+			char parsed_smartctl[SMART_MAX];
+			char parsed_smartctl_info[SMART_MAX];
 
 			ret = sgettok(f, buffer, sizeof(buffer));
 			if (ret < 0) {
@@ -1127,7 +1201,7 @@ void state_config(struct snapraid_state* state, const char* path, const char* co
 				/* LCOV_EXCL_STOP */
 			}
 
-			if (validate_smartctl(custom) != 0) {
+			if (parse_smartctl(custom, parsed_smartctl, sizeof(parsed_smartctl), parsed_smartctl_info, sizeof(parsed_smartctl_info)) != 0) {
 				/* LCOV_EXCL_START */
 				log_fatal(EUSER, "Invalid 'smartctl' option in '%s' at line %u\n", path, line);
 				exit(EXIT_FAILURE);
@@ -1143,7 +1217,8 @@ void state_config(struct snapraid_state* state, const char* path, const char* co
 					/* LCOV_EXCL_STOP */
 				}
 
-				pathcpy(state->parity[level].smartctl, sizeof(state->parity[level].smartctl), custom);
+				pathcpy(state->parity[level].smartctl, sizeof(state->parity[level].smartctl), parsed_smartctl);
+				pathcpy(state->parity[level].smartctl_info, sizeof(state->parity[level].smartctl_info), parsed_smartctl_info);
 			} else {
 				/* search the disk */
 				struct snapraid_disk* found_disk = 0;
@@ -1170,7 +1245,8 @@ void state_config(struct snapraid_state* state, const char* path, const char* co
 						/* LCOV_EXCL_STOP */
 					}
 
-					pathcpy(found_disk->smartctl, sizeof(found_disk->smartctl), custom);
+					pathcpy(found_disk->smartctl, sizeof(found_disk->smartctl), parsed_smartctl);
+					pathcpy(found_disk->smartctl_info, sizeof(found_disk->smartctl_info), parsed_smartctl_info);
 				} else if (found_extra) {
 					if (found_extra->smartctl[0] != 0) {
 						/* LCOV_EXCL_START */
@@ -1179,7 +1255,8 @@ void state_config(struct snapraid_state* state, const char* path, const char* co
 						/* LCOV_EXCL_STOP */
 					}
 
-					pathcpy(found_extra->smartctl, sizeof(found_extra->smartctl), custom);
+					pathcpy(found_extra->smartctl, sizeof(found_extra->smartctl), parsed_smartctl);
+					pathcpy(found_extra->smartctl_info, sizeof(found_extra->smartctl_info), parsed_smartctl_info);
 				} else {
 					/* LCOV_EXCL_START */
 					log_fatal(EUSER, "Unknown 'smartctl' name '%s' at line %u\n", buffer, line);

cmdline/state.h

@@ -460,5 +460,10 @@ void state_snapshot_cleanup(struct snapraid_state* state);
  */
 void generate_configuration(const char* content);
 
+/**
+ * Parse smartctl command.
+ */
+int parse_smartctl(const char* custom, char* smartctl, size_t smartctl_size, char* smartctl_info, size_t smartctl_info_size);
+
 #endif
 

cmdline/unix.c

@@ -598,30 +598,10 @@ int os_spawn_and_wait(const char** argv)
 	return -1;
 }
 
-#define ARGV_MAX 64
+OS_FILE* os_popen(const char** argv)
-
-OS_FILE* os_popen(const char** argv, char* extra_args)
 {
-	const char* combined_argv[ARGV_MAX];
-
-	unsigned argc = 0;
-	while (argv[argc] && argc < ARGV_MAX) {
-		combined_argv[argc] = argv[argc];
-		++argc;
-	}
-
-	if (extra_args)
-		argc += argsplit(combined_argv + argc, ARGV_MAX - argc, extra_args);
-
-	if (argc >= ARGV_MAX) {
-		errno = E2BIG;
-		return NULL;
-	}
-
-	combined_argv[argc] = 0;
-
 	int stdout_fd = -1;
-	pid_t pid = os_spawn_stdout(combined_argv, &stdout_fd);
+	pid_t pid = os_spawn_stdout(argv, &stdout_fd);
 	if (pid < 0) {
 		return 0;
 	}

cmdline/unixapp.c

@@ -839,7 +839,7 @@ static int extract_zfs(const char* dir, char* dataset, size_t dataset_size, char
 		0
 	};
 
-	OS_FILE* fp = os_popen(argv, 0);
+	OS_FILE* fp = os_popen(argv);
 	if (!fp) {
 		/* LCOV_EXCL_START */
 		return -1;
@@ -922,7 +922,7 @@ static int devdereference_zfs(uint64_t device, const char* dir, tommy_list* devl
 		0
 	};
 
-	OS_FILE* fp = os_popen(argv, 0);
+	OS_FILE* fp = os_popen(argv);
 	if (!fp) {
 		/* LCOV_EXCL_START */
 		return -1;
@@ -2769,6 +2769,7 @@ static int devtree(devinfo_t* parent, dev_t device, tommy_list* list)
 		devinfo->device = device;
 		pathcpy(devinfo->name, sizeof(devinfo->name), parent->name);
 		pathcpy(devinfo->smartctl, sizeof(devinfo->smartctl), parent->smartctl);
+		pathcpy(devinfo->smartctl_info, sizeof(devinfo->smartctl_info), parent->smartctl_info);
 		memcpy(devinfo->smartignore, parent->smartignore, sizeof(devinfo->smartignore));
 		pathcpy(devinfo->file, sizeof(devinfo->file), path);
 		devinfo->parent = parent;
@@ -2857,17 +2858,22 @@ static int devstat(dev_t device, uint64_t* count)
 }
 #endif
 
+/**
+ * Max number of arguments supported.
+ */
+#define ARGS_MAX 64
+
 /**
  * Get SMART attributes.
  */
 #if HAVE_LINUX_DEVICE
-static int devsmart(dev_t device, const char* name, const char* smartctl, struct smart_attr* smart, uint64_t* info, char* serial, char* family, char* model, char* interface)
+static int devsmart(dev_t device, const char* name, const char* smartctl, const char* smartctl_info, struct smart_attr* smart, uint64_t* info, char* serial, char* family, char* model, char* interface)
 {
-	char extra_args[PATH_MAX];
 	char file[PATH_MAX];
 	OS_FILE* f;
 	int ret;
 	const char* x;
+	const char* info_opts = smartctl_info[0] ? smartctl_info : "-a";
 
 	x = find_smartctl();
 	if (!x) {
@@ -2884,32 +2890,33 @@ static int devsmart(dev_t device, const char* name, const char* smartctl, struct
 		/* LCOV_EXCL_STOP */
 	}
 
-	/* if there is a custom smartctl command */
+	const char* argv[ARGS_MAX];
-	const char* args = "-a";
+	unsigned argc = 0;
+	argv[argc++] = x;
+
+	char info_buf[SMART_MAX];
+	pathcpy(info_buf, sizeof(info_buf), info_opts);
+	argc += argsplit(argv + argc, ARGS_MAX - argc - 1, info_buf);
+
+	char extra_args[PATH_MAX];
 	if (smartctl[0]) {
 		pathprint(extra_args, sizeof(extra_args), smartctl, file);
-		const char* argv[] = {
+		argc += argsplit(argv + argc, ARGS_MAX - argc - 1, extra_args);
-			x,
+		log_tag("smartctl:%s:%s:run: %s [info: %s] %s\n", file, name, x, info_opts, extra_args);
-			"-a",
-			0
-		};
-		log_tag("smartctl:%s:%s:run: %s %s %s\n", file, name, x, args, extra_args);
-		f = os_popen(argv, extra_args);
 	} else {
-		pathprint(extra_args, sizeof(extra_args), "%s", file);
+		argv[argc++] = file;
-		const char* argv[] = {
+		log_tag("smartctl:%s:%s:run: %s [info: %s] %s\n", file, name, x, info_opts, file);
-			x,
-			"-a",
-			file,
-			0
-		};
-		log_tag("smartctl:%s:%s:run: %s %s %s\n", file, name, x, args, extra_args);
-		f = os_popen(argv, 0);
 	}
+	argv[argc++] = 0;
+
+	f = os_popen(argv);
 	if (!f) {
 		/* LCOV_EXCL_START */
 		log_tag("device:%s:%s:spawn\n", file, name);
-		log_fatal(EEXTERNAL, "Failed to run '%s %s %s'.\n", x, args, extra_args);
+		if (smartctl[0])
+			log_fatal(EEXTERNAL, "Failed to run '%s %s %s'.\n", x, info_opts, extra_args);
+		else
+			log_fatal(EEXTERNAL, "Failed to run '%s %s %s'.\n", x, info_opts, file);
 		return -1;
 		/* LCOV_EXCL_STOP */
 	}
@@ -2929,7 +2936,10 @@ static int devsmart(dev_t device, const char* name, const char* smartctl, struct
 	if (!WIFEXITED(ret)) {
 		/* LCOV_EXCL_START */
 		log_tag("device:%s:%s:abort\n", file, name);
-		log_fatal(EEXTERNAL, "Failed to run '%s %s %s' (not exited).\n", x, args, extra_args);
+		if (smartctl[0])
+			log_fatal(EEXTERNAL, "Failed to run '%s %s %s' (not exited).\n", x, info_opts, extra_args);
+		else
+			log_fatal(EEXTERNAL, "Failed to run '%s %s %s' (not exited).\n", x, info_opts, file);
 		return -1;
 		/* LCOV_EXCL_STOP */
 	}
@@ -3014,13 +3024,13 @@ static void devattr(dev_t device, uint64_t* info, char* serial, char* family, ch
  * Get POWER state.
  */
 #if HAVE_LINUX_DEVICE
-static int devprobe(dev_t device, const char* name, const char* smartctl, int* power, struct smart_attr* smart, uint64_t* info, char* serial, char* family, char* model, char* interface)
+static int devprobe(dev_t device, const char* name, const char* smartctl, const char* smartctl_info, int* power, struct smart_attr* smart, uint64_t* info, char* serial, char* family, char* model, char* interface)
 {
-	char extra_args[PATH_MAX];
 	char file[PATH_MAX];
 	OS_FILE* f;
 	int ret;
 	const char* x;
+	const char* info_opts = smartctl_info[0] ? smartctl_info : "-a";
 
 	x = find_smartctl();
 	if (!x) {
@@ -3037,36 +3047,35 @@ static int devprobe(dev_t device, const char* name, const char* smartctl, int* p
 		/* LCOV_EXCL_STOP */
 	}
 
-	/* if there is a custom smartctl command */
+	const char* argv[ARGS_MAX];
-	const char* args = "-n standby,3 -a";
+	unsigned argc = 0;
+	argv[argc++] = x;
+	argv[argc++] = "-n";
+	argv[argc++] = "standby,3";
+
+	char info_buf[SMART_MAX];
+	pathcpy(info_buf, sizeof(info_buf), info_opts);
+	argc += argsplit(argv + argc, ARGS_MAX - argc - 1, info_buf);
+
+	char extra_args[PATH_MAX];
 	if (smartctl[0]) {
 		pathprint(extra_args, sizeof(extra_args), smartctl, file);
-		const char* argv[] = {
+		argc += argsplit(argv + argc, ARGS_MAX - argc - 1, extra_args);
-			x,
+		log_tag("smartctl:%s:%s:run: %s -n standby,3 [info: %s] %s\n", file, name, x, info_opts, extra_args);
-			"-n",
-			"standby,3",
-			"-a",
-			0
-		};
-		log_tag("smartctl:%s:%s:run: %s %s %s\n", file, name, x, args, extra_args);
-		f = os_popen(argv, extra_args);
 	} else {
-		pathprint(extra_args, sizeof(extra_args), "%s", file);
+		argv[argc++] = file;
-		const char* argv[] = {
+		log_tag("smartctl:%s:%s:run: %s -n standby,3 [info: %s] %s\n", file, name, x, info_opts, file);
-			x,
-			"-n",
-			"standby,3",
-			"-a",
-			file,
-			0
-		};
-		log_tag("smartctl:%s:%s:run: %s %s %s\n", file, name, x, args, extra_args);
-		f = os_popen(argv, 0);
 	}
+	argv[argc++] = 0;
+
+	f = os_popen(argv);
 	if (!f) {
 		/* LCOV_EXCL_START */
 		log_tag("device:%s:%s:spawn\n", file, name);
-		log_fatal(EEXTERNAL, "Failed to run '%s %s %s'.\n", x, args, extra_args);
+		if (smartctl[0])
+			log_fatal(EEXTERNAL, "Failed to run '%s -n standby,3 %s %s'.\n", x, info_opts, extra_args);
+		else
+			log_fatal(EEXTERNAL, "Failed to run '%s -n standby,3 %s %s'.\n", x, info_opts, file);
 		return -1;
 		/* LCOV_EXCL_STOP */
 	}
@@ -3086,7 +3095,10 @@ static int devprobe(dev_t device, const char* name, const char* smartctl, int* p
 	if (!WIFEXITED(ret)) {
 		/* LCOV_EXCL_START */
 		log_tag("device:%s:%s:abort\n", file, name);
-		log_fatal(EEXTERNAL, "Failed to run '%s %s %s' (not exited).\n", x, args, extra_args);
+		if (smartctl[0])
+			log_fatal(EEXTERNAL, "Failed to run '%s -n standby,3 %s %s' (not exited).\n", x, info_opts, extra_args);
+		else
+			log_fatal(EEXTERNAL, "Failed to run '%s -n standby,3 %s %s' (not exited).\n", x, info_opts, file);
 		return -1;
 		/* LCOV_EXCL_STOP */
 	}
@@ -3134,34 +3146,30 @@ static int devdown(dev_t device, const char* name, const char* smartctl)
 		/* LCOV_EXCL_STOP */
 	}
 
-	/* if there is a custom smartctl command */
+	const char* argv[ARGS_MAX];
-	const char* args = "-s standby,now";
+	unsigned argc = 0;
+	argv[argc++] = x;
+	argv[argc++] = "-s";
+	argv[argc++] = "standby,now";
+
 	if (smartctl[0]) {
 		pathprint(extra_args, sizeof(extra_args), smartctl, file);
-		const char* argv[] = {
+		argc += argsplit(argv + argc, ARGS_MAX - argc - 1, extra_args);
-			x,
+		log_tag("smartctl:%s:%s:run: %s -s standby,now %s\n", file, name, x, extra_args);
-			"-s",
-			"standby,now",
-			0
-		};
-		log_tag("smartctl:%s:%s:run: %s %s %s\n", file, name, x, args, extra_args);
-		f = os_popen(argv, extra_args);
 	} else {
-		pathprint(extra_args, sizeof(extra_args), "%s", file);
+		argv[argc++] = file;
-		const char* argv[] = {
+		log_tag("smartctl:%s:%s:run: %s -s standby,now %s\n", file, name, x, file);
-			x,
-			"-s",
-			"standby,now",
-			file,
-			0
-		};
-		log_tag("smartctl:%s:%s:run: %s %s %s\n", file, name, x, args, extra_args);
-		f = os_popen(argv, 0);
 	}
+	argv[argc++] = 0;
+
+	f = os_popen(argv);
 	if (!f) {
 		/* LCOV_EXCL_START */
 		log_tag("device:%s:%s:spawn\n", file, name);
-		log_fatal(EEXTERNAL, "Failed to run '%s %s %s'.\n", x, args, extra_args);
+		if (smartctl[0])
+			log_fatal(EEXTERNAL, "Failed to run '%s -s standby,now %s'.\n", x, extra_args);
+		else
+			log_fatal(EEXTERNAL, "Failed to run '%s -s standby,now %s'.\n", x, file);
 		return -1;
 		/* LCOV_EXCL_STOP */
 	}
@@ -3181,7 +3189,10 @@ static int devdown(dev_t device, const char* name, const char* smartctl)
 	if (!WIFEXITED(ret)) {
 		/* LCOV_EXCL_START */
 		log_tag("device:%s:%s:abort\n", file, name);
-		log_fatal(EEXTERNAL, "Failed to run '%s %s %s' (not exited).\n", x, args, extra_args);
+		if (smartctl[0])
+			log_fatal(EEXTERNAL, "Failed to run '%s -s standby,now %s' (not exited).\n", x, extra_args);
+		else
+			log_fatal(EEXTERNAL, "Failed to run '%s -s standby,now %s' (not exited).\n", x, file);
 		return -1;
 		/* LCOV_EXCL_STOP */
 	}
@@ -3189,7 +3200,10 @@ static int devdown(dev_t device, const char* name, const char* smartctl)
 	if (WEXITSTATUS(ret) != 0) {
 		/* LCOV_EXCL_START */
 		log_tag("device:%s:%s:exit:%d\n", file, name, WEXITSTATUS(ret));
-		log_fatal(EEXTERNAL, "Failed to run '%s %s %s' with return code %xh.\n", x, args, extra_args, WEXITSTATUS(ret));
+		if (smartctl[0])
+			log_fatal(EEXTERNAL, "Failed to run '%s -s standby,now %s' with return code %xh.\n", x, extra_args, WEXITSTATUS(ret));
+		else
+			log_fatal(EEXTERNAL, "Failed to run '%s -s standby,now %s' with return code %xh.\n", x, file, WEXITSTATUS(ret));
 		return -1;
 		/* LCOV_EXCL_STOP */
 	}
@@ -3204,11 +3218,11 @@ static int devdown(dev_t device, const char* name, const char* smartctl)
  * Spin down a specific device if it's up.
  */
 #if HAVE_LINUX_DEVICE
-static int devdownifup(dev_t device, const char* name, const char* smartctl, int* power)
+static int devdownifup(dev_t device, const char* name, const char* smartctl, const char* smartctl_info, int* power)
 {
 	*power = POWER_UNKNOWN;
 
-	if (devprobe(device, name, smartctl, power, 0, 0, 0, 0, 0, 0) != 0)
+	if (devprobe(device, name, smartctl, smartctl_info, power, 0, 0, 0, 0, 0, 0) != 0)
 		return -1;
 
 	if (*power == POWER_ACTIVE)
@@ -3372,7 +3386,7 @@ static void* thread_spinup(void* arg)
 	msg_status("Spunup device '%s' for disk '%s' in %" PRIu64 " ms.\n", devinfo->file, devinfo->name, os_tick_ms() - start);
 
 	/* after the spin up, get SMART info */
-	if (devsmart(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
+	if (devsmart(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smartctl_info, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
 		/* LCOV_EXCL_START */
 		return (void*)-1;
 		/* LCOV_EXCL_STOP */
@@ -3435,7 +3449,7 @@ static void* thread_spindownifup(void* arg)
 
 	start = os_tick_ms();
 
-	if (devdownifup(devinfo->device, devinfo->name, devinfo->smartctl, &power) != 0) {
+	if (devdownifup(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smartctl_info, &power) != 0) {
 		/* LCOV_EXCL_START */
 		return (void*)-1;
 		/* LCOV_EXCL_STOP */
@@ -3459,7 +3473,7 @@ static void* thread_smart(void* arg)
 #if HAVE_LINUX_DEVICE
 	devinfo_t* devinfo = arg;
 
-	if (devsmart(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
+	if (devsmart(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smartctl_info, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
 		/* LCOV_EXCL_START */
 		return (void*)-1;
 		/* LCOV_EXCL_STOP */
@@ -3488,7 +3502,7 @@ static void* thread_probe(void* arg)
 #if HAVE_LINUX_DEVICE
 	devinfo_t* devinfo = arg;
 
-	if (devprobe(devinfo->device, devinfo->name, devinfo->smartctl, &devinfo->power, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
+	if (devprobe(devinfo->device, devinfo->name, devinfo->smartctl, devinfo->smartctl_info, &devinfo->power, devinfo->smart, devinfo->info, devinfo->serial, devinfo->family, devinfo->model, devinfo->interf) != 0) {
 		/* LCOV_EXCL_START */
 		return (void*)-1;
 		/* LCOV_EXCL_STOP */

doc/snapraid-de.1

@@ -1762,6 +1762,9 @@ In den angegebenen OPTIONS wird die Zeichenfolge \`%s\` durch den
 Gerätenamen ersetzt. Bei RAID\-Controllern ist das Gerät
 wahrscheinlich fest, und Sie müssen \`%s\` möglicherweise nicht verwenden.
 .PP
+Sie können auch eine benutzerdefinierte Info\-Optionszeichenfolge mit dem
+Tag \`[info: ...]\` angeben, um die Standardoption \`\-a\` zu ersetzen.
+.PP
 Weitere mögliche Optionen finden Sie in der smartmontools\-Dokumentation:
 .PP
 .RS 4
@@ -1777,6 +1780,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 Zum Beispiel:
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1845,7 +1852,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-de.d

@@ -1465,6 +1465,9 @@ Configuration
 	Gerätenamen ersetzt. Bei RAID-Controllern ist das Gerät
 	wahrscheinlich fest, und Sie müssen `%s` möglicherweise nicht verwenden.
 
+	Sie können auch eine benutzerdefinierte Info-Optionszeichenfolge mit dem
+	Tag `[info: ...]` angeben, um die Standardoption `-a` zu ersetzen.
+
 	Weitere mögliche Optionen finden Sie in der smartmontools-Dokumentation:
 
 		:https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1472,6 +1475,7 @@ Configuration
 
 	Zum Beispiel:
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1506,7 +1510,7 @@ Configuration
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0

doc/snapraid-de.txt

@@ -1563,6 +1563,9 @@ In den angegebenen OPTIONS wird die Zeichenfolge `%s` durch den
 Gerätenamen ersetzt. Bei RAID-Controllern ist das Gerät
 wahrscheinlich fest, und Sie müssen `%s` möglicherweise nicht verwenden.
 
+Sie können auch eine benutzerdefinierte Info-Optionszeichenfolge mit dem
+Tag `[info: ...]` angeben, um die Standardoption `-a` zu ersetzen.
+
 Weitere mögliche Optionen finden Sie in der smartmontools-Dokumentation:
 
     https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1570,6 +1573,7 @@ Weitere mögliche Optionen finden Sie in der smartmontools-Dokumentation:
 
 Zum Beispiel:
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1608,7 +1612,7 @@ Ein Beispiel für eine typische Konfiguration für Unix ist:
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0

doc/snapraid-es.1

@@ -1714,6 +1714,10 @@ En las OPCIONES especificadas, la cadena \`%s\` se reemplaza por
 el nombre del dispositivo. Para los controladores RAID, el dispositivo
 es probable que sea fijo y es posible que no necesite usar \`%s\`.
 .PP
+También puede especificar una cadena de opciones de información
+personalizada mediante la etiqueta \`[info: ...]\` para sustituir
+la opción \`\-a\` predeterminada.
+.PP
 Consulte la documentación de smartmontools para conocer las posibles
 opciones:
 .PP
@@ -1730,6 +1734,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 Por ejemplo:
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1797,7 +1805,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1853,7 +1861,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-es.d

@@ -1428,6 +1428,10 @@ Configuration
 	el nombre del dispositivo. Para los controladores RAID, el dispositivo
 	es probable que sea fijo y es posible que no necesite usar `%s`.
 
+	También puede especificar una cadena de opciones de información
+	personalizada mediante la etiqueta `[info: ...]` para sustituir
+	la opción `-a` predeterminada.
+
 	Consulte la documentación de smartmontools para conocer las posibles
 	opciones:
 
@@ -1436,6 +1440,7 @@ Configuration
 
 	Por ejemplo:
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1469,7 +1474,7 @@ Configuration
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1485,7 +1490,7 @@ Configuration
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-es.txt

@@ -1526,6 +1526,10 @@ En las OPCIONES especificadas, la cadena `%s` se reemplaza por
 el nombre del dispositivo. Para los controladores RAID, el dispositivo
 es probable que sea fijo y es posible que no necesite usar `%s`.
 
+También puede especificar una cadena de opciones de información
+personalizada mediante la etiqueta `[info: ...]` para sustituir
+la opción `-a` predeterminada.
+
 Consulte la documentación de smartmontools para conocer las posibles
 opciones:
 
@@ -1534,6 +1538,7 @@ opciones:
 
 Por ejemplo:
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1571,7 +1576,7 @@ Un ejemplo de una configuración típica para Unix es:
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1587,7 +1592,7 @@ Un ejemplo de una configuración típica para Windows es:
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-fr.1

@@ -1747,6 +1747,10 @@ Dans les OPTIONS spécifiées, la chaîne \`%s\` est remplacée par le
 nom du périphérique. Pour les contrôleurs RAID, le périphérique est
 probablement fixe, et vous n\'aurez peut\-être pas besoin d\'utiliser \`%s\`.
 .PP
+Vous pouvez également spécifier une chaîne d\'options d\'information
+personnalisée à l\'aide de la balise \`[info: ...]\` pour remplacer
+l\'option \`\-a\` par défaut.
+.PP
 Consultez la documentation smartmontools pour les options possibles :
 .PP
 .RS 4
@@ -1762,6 +1766,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 Par exemple :
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1829,7 +1837,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1885,7 +1893,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-fr.d

@@ -1464,6 +1464,10 @@ Configuration
 	nom du périphérique. Pour les contrôleurs RAID, le périphérique est
 	probablement fixe, et vous n'aurez peut-être pas besoin d'utiliser `%s`.
 
+	Vous pouvez également spécifier une chaîne d'options d'information
+	personnalisée à l'aide de la balise `[info: ...]` pour remplacer
+	l'option `-a` par défaut.
+
 	Consultez la documentation smartmontools pour les options possibles :
 
 		:https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1471,6 +1475,7 @@ Configuration
 
 	Par exemple :
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISQUE/PARITÉ ATTR [ATTR...]
@@ -1504,7 +1509,7 @@ Configuration
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1520,7 +1525,7 @@ Configuration
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-fr.txt

@@ -1562,6 +1562,10 @@ Dans les OPTIONS spécifiées, la chaîne `%s` est remplacée par le
 nom du périphérique. Pour les contrôleurs RAID, le périphérique est
 probablement fixe, et vous n'aurez peut-être pas besoin d'utiliser `%s`.
 
+Vous pouvez également spécifier une chaîne d'options d'information
+personnalisée à l'aide de la balise `[info: ...]` pour remplacer
+l'option `-a` par défaut.
+
 Consultez la documentation smartmontools pour les options possibles :
 
     https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1569,6 +1573,7 @@ Consultez la documentation smartmontools pour les options possibles :
 
 Par exemple :
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISQUE/PARITÉ ATTR [ATTR...]
@@ -1606,7 +1611,7 @@ Un exemple de configuration typique pour Unix est :
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1622,7 +1627,7 @@ Un exemple de configuration typique pour Windows est :
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-it.1

@@ -1737,6 +1737,10 @@ Nelle OPTIONS specificate, la stringa \`%s\` viene sostituita dal
 nome del dispositivo. Per i controller RAID, il dispositivo è
 probabilmente fisso e potrebbe non essere necessario utilizzare \`%s\`.
 .PP
+È inoltre possibile specificare una stringa di opzioni di informazioni
+personalizzate tramite il tag \`[info: ...]\` per sostituire l\'opzione
+\`\-a\` predefinita.
+.PP
 Fare riferimento alla documentazione di smartmontools per le possibili
 opzioni:
 .PP
@@ -1753,6 +1757,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 Ad esempio:
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1820,7 +1828,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1876,7 +1884,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-it.d

@@ -1440,6 +1440,10 @@ Configurazione
 	nome del dispositivo. Per i controller RAID, il dispositivo è
 	probabilmente fisso e potrebbe non essere necessario utilizzare `%s`.
 
+	È inoltre possibile specificare una stringa di opzioni di informazioni
+	personalizzate tramite il tag `[info: ...]` per sostituire l'opzione
+	`-a` predefinita.
+
 	Fare riferimento alla documentazione di smartmontools per le possibili
 	opzioni:
 
@@ -1448,6 +1452,7 @@ Configurazione
 
 	Ad esempio:
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1481,7 +1486,7 @@ Configurazione
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1497,7 +1502,7 @@ Configurazione
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-it.txt

@@ -1538,6 +1538,10 @@ Nelle OPTIONS specificate, la stringa `%s` viene sostituita dal
 nome del dispositivo. Per i controller RAID, il dispositivo è
 probabilmente fisso e potrebbe non essere necessario utilizzare `%s`.
 
+È inoltre possibile specificare una stringa di opzioni di informazioni
+personalizzate tramite il tag `[info: ...]` per sostituire l'opzione
+`-a` predefinita.
+
 Fare riferimento alla documentazione di smartmontools per le possibili
 opzioni:
 
@@ -1546,6 +1550,7 @@ opzioni:
 
 Ad esempio:
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1583,7 +1588,7 @@ Un esempio di configurazione tipica per Unix è:
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1599,7 +1604,7 @@ Un esempio di configurazione tipica per Windows è:
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-ja.1

@@ -1546,6 +1546,9 @@ PARITY はパリティ名のいずれかです：\`parity\`、\`2\-parity\`、\`
 RAIDコントローラーの場合、デバイスは固定されている可能性が高いため、
 \`%s\` を使用する必要はないかもしれません。
 .PP
+デフォルトの \`\-a\` オプションを置き換えるために、\`[info: ...]\` タグを使用して
+カスタム情報オプション文字列を指定することもできます。
+.PP
 使用可能なオプションについては、smartmontoolsのドキュメントを参照してください。
 .PP
 .RS 4
@@ -1561,6 +1564,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 例：
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1626,7 +1633,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1682,7 +1689,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-ja.d

@@ -1260,6 +1260,9 @@ Configuration
 	RAIDコントローラーの場合、デバイスは固定されている可能性が高いため、
 	`%s` を使用する必要はないかもしれません。
 
+	デフォルトの `-a` オプションを置き換えるために、`[info: ...]` タグを使用して
+	カスタム情報オプション文字列を指定することもできます。
+
 	使用可能なオプションについては、smartmontoolsのドキュメントを参照してください。
 
 		:https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1267,6 +1270,7 @@ Configuration
 
 	例：
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1298,7 +1302,7 @@ Configuration
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1314,7 +1318,7 @@ Configuration
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-ja.txt

@@ -1358,6 +1358,9 @@ PARITY はパリティ名のいずれかです：`parity`、`2-parity`、`3-pari
 RAIDコントローラーの場合、デバイスは固定されている可能性が高いため、
 `%s` を使用する必要はないかもしれません。
 
+デフォルトの `-a` オプションを置き換えるために、`[info: ...]` タグを使用して
+カスタム情報オプション文字列を指定することもできます。
+
 使用可能なオプションについては、smartmontoolsのドキュメントを参照してください。
 
     https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1365,6 +1368,7 @@ RAIDコントローラーの場合、デバイスは固定されている可能
 
 例：
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1400,7 +1404,7 @@ Unixの一般的な構成の例は次のとおりです。
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1416,7 +1420,7 @@ Windowsの一般的な構成の例は次のとおりです。
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-ko.1

@@ -1591,6 +1591,9 @@ PARITY는 \`parity\`, \`2\-parity\`, \`3\-parity\`, \`4\-parity\`, \`5\-parity\`
 RAID 컨트롤러의 경우 장치가 고정되어 있을 가능성이 높으므로
 \`%s\`를 사용할 필요가 없을 수 있습니다.
 .PP
+기본 \`\-a\` 옵션을 대체하기 위해 \`[info: ...]\` 태그를 사용하여
+사용자 정의 정보 옵션 문자열을 지정할 수도 있습니다.
+.PP
 가능한 옵션은 smartmontools 설명서를 참조하십시오:
 .PP
 .RS 4
@@ -1606,6 +1609,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 예:
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1672,7 +1679,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1728,7 +1735,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-ko.d

@@ -1305,6 +1305,9 @@ Configuration
 	RAID 컨트롤러의 경우 장치가 고정되어 있을 가능성이 높으므로
 	`%s`를 사용할 필요가 없을 수 있습니다.
 
+	기본 `-a` 옵션을 대체하기 위해 `[info: ...]` 태그를 사용하여
+	사용자 정의 정보 옵션 문자열을 지정할 수도 있습니다.
+
 	가능한 옵션은 smartmontools 설명서를 참조하십시오:
 
 		:https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1312,6 +1315,7 @@ Configuration
 
 	예:
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1344,7 +1348,7 @@ Configuration
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1360,7 +1364,7 @@ Configuration
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-ko.txt

@@ -1403,6 +1403,9 @@ PARITY는 `parity`, `2-parity`, `3-parity`, `4-parity`, `5-parity`,
 RAID 컨트롤러의 경우 장치가 고정되어 있을 가능성이 높으므로
 `%s`를 사용할 필요가 없을 수 있습니다.
 
+기본 `-a` 옵션을 대체하기 위해 `[info: ...]` 태그를 사용하여
+사용자 정의 정보 옵션 문자열을 지정할 수도 있습니다.
+
 가능한 옵션은 smartmontools 설명서를 참조하십시오:
 
     https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1410,6 +1413,7 @@ RAID 컨트롤러의 경우 장치가 고정되어 있을 가능성이 높으므
 
 예:
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1446,7 +1450,7 @@ Unix의 일반적인 설정 예는 다음과 같습니다:
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1462,7 +1466,7 @@ Windows의 일반적인 설정 예는 다음과 같습니다:
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-pl.1

@@ -1638,6 +1638,9 @@ W określonych OPCJACH ciąg \`%s\` jest zastępowany
 nazwą urządzenia. W przypadku kontrolerów RAID, urządzenie jest
 prawdopodobnie stałe i może nie być konieczne użycie \`%s\`.
 .PP
+Możesz również określić niestandardowy ciąg opcji informacyjnych za pomocą
+znacznika \`[info: ...]\`, aby zastąpić domyślną opcję \`\-a\`.
+.PP
 Zapoznaj się z dokumentacją smartmontools, aby uzyskać możliwe opcje:
 .PP
 .RS 4
@@ -1653,6 +1656,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 Na przykład:
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1719,7 +1726,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1775,7 +1782,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-pl.d

@@ -1352,6 +1352,9 @@ Configuration
 	nazwą urządzenia. W przypadku kontrolerów RAID, urządzenie jest
 	prawdopodobnie stałe i może nie być konieczne użycie `%s`.
 
+	Możesz również określić niestandardowy ciąg opcji informacyjnych za pomocą
+	znacznika `[info: ...]`, aby zastąpić domyślną opcję `-a`.
+
 	Zapoznaj się z dokumentacją smartmontools, aby uzyskać możliwe opcje:
 
 		:https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1359,6 +1362,7 @@ Configuration
 
 	Na przykład:
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1391,7 +1395,7 @@ Configuration
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1407,7 +1411,7 @@ Configuration
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-pl.txt

@@ -1450,6 +1450,9 @@ W określonych OPCJACH ciąg `%s` jest zastępowany
 nazwą urządzenia. W przypadku kontrolerów RAID, urządzenie jest
 prawdopodobnie stałe i może nie być konieczne użycie `%s`.
 
+Możesz również określić niestandardowy ciąg opcji informacyjnych za pomocą
+znacznika `[info: ...]`, aby zastąpić domyślną opcję `-a`.
+
 Zapoznaj się z dokumentacją smartmontools, aby uzyskać możliwe opcje:
 
     https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1457,6 +1460,7 @@ Zapoznaj się z dokumentacją smartmontools, aby uzyskać możliwe opcje:
 
 Na przykład:
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1493,7 +1497,7 @@ Przykład typowej konfiguracji dla systemu Unix:
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1509,7 +1513,7 @@ Przykład typowej konfiguracji dla systemu Windows:
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-pt.1

@@ -1676,6 +1676,9 @@ Nas OPTIONS especificadas, a string \`%s\` é substituída pelo
 nome do dispositivo. Para controladores RAID, o dispositivo é
 provavelmente fixo, e você pode não precisar usar \`%s\`.
 .PP
+Você também pode especificar uma string personalizada de opções de informação
+usando a tag \`[info: ...]\` para substituir a opção padrão \`\-a\`.
+.PP
 Consulte a documentação do smartmontools para possíveis opções:
 .PP
 .RS 4
@@ -1691,6 +1694,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 Por exemplo:
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1757,7 +1764,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1813,7 +1820,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-pt.d

@@ -1390,6 +1390,9 @@ Configuração
 	nome do dispositivo. Para controladores RAID, o dispositivo é
 	provavelmente fixo, e você pode não precisar usar `%s`.
 
+	Você também pode especificar uma string personalizada de opções de informação
+	usando a tag `[info: ...]` para substituir a opção padrão `-a`.
+
 	Consulte a documentação do smartmontools para possíveis opções:
 
 		:https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1397,6 +1400,7 @@ Configuração
 
 	Por exemplo:
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1429,7 +1433,7 @@ Configuração
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1445,7 +1449,7 @@ Configuração
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-pt.txt

@@ -1488,6 +1488,9 @@ Nas OPTIONS especificadas, a string `%s` é substituída pelo
 nome do dispositivo. Para controladores RAID, o dispositivo é
 provavelmente fixo, e você pode não precisar usar `%s`.
 
+Você também pode especificar uma string personalizada de opções de informação
+usando a tag `[info: ...]` para substituir a opção padrão `-a`.
+
 Consulte a documentação do smartmontools para possíveis opções:
 
     https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1495,6 +1498,7 @@ Consulte a documentação do smartmontools para possíveis opções:
 
 Por exemplo:
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1531,7 +1535,7 @@ Um exemplo de uma configuração típica para Unix é:
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1547,7 +1551,7 @@ Um exemplo de uma configuração típica para Windows é:
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-ro.1

@@ -1641,6 +1641,9 @@ PARITY este unul dintre numele de paritate: \`parity\`, \`2\-parity\`, \`3\-pari
 numele dispozitivului. Pentru controlerele RAID, dispozitivul este
 probabil fix și este posibil să nu fie nevoie să utilizați \`%s\`.
 .PP
+De asemenea, puteți specifica un șir de opțiuni de informații personalizate
+utilizând eticheta \`[info: ...]\` pentru a înlocui opțiunea implicită \`\-a\`.
+.PP
 Consultați documentația smartmontools pentru opțiuni posibile:
 .PP
 .RS 4
@@ -1656,6 +1659,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 De exemplu:
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1722,7 +1729,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1778,7 +1785,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-ro.d

@@ -1355,6 +1355,9 @@ Configurare
 	numele dispozitivului. Pentru controlerele RAID, dispozitivul este
 	probabil fix și este posibil să nu fie nevoie să utilizați `%s`.
 
+	De asemenea, puteți specifica un șir de opțiuni de informații personalizate
+	utilizând eticheta `[info: ...]` pentru a înlocui opțiunea implicită `-a`.
+
 	Consultați documentația smartmontools pentru opțiuni posibile:
 
 		:https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1362,6 +1365,7 @@ Configurare
 
 	De exemplu:
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1394,7 +1398,7 @@ Configurare
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1410,7 +1414,7 @@ Configurare
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-ro.txt

@@ -1453,6 +1453,9 @@ PARITY este unul dintre numele de paritate: `parity`, `2-parity`, `3-parity`,
 numele dispozitivului. Pentru controlerele RAID, dispozitivul este
 probabil fix și este posibil să nu fie nevoie să utilizați `%s`.
 
+De asemenea, puteți specifica un șir de opțiuni de informații personalizate
+utilizând eticheta `[info: ...]` pentru a înlocui opțiunea implicită `-a`.
+
 Consultați documentația smartmontools pentru opțiuni posibile:
 
     https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1460,6 +1463,7 @@ Consultați documentația smartmontools pentru opțiuni posibile:
 
 De exemplu:
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1496,7 +1500,7 @@ Un exemplu de configurare tipică pentru Unix este:
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1512,7 +1516,7 @@ Un exemplu de configurare tipică pentru Windows este:
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-ru.1

@@ -1643,6 +1643,9 @@ PARITY — это одно из имен четности: \`parity\`, \`2\-pari
 именем устройства. Для контроллеров RAID устройство,
 вероятно, фиксировано, и вам может не потребоваться использовать \`%s\`.
 .PP
+Вы также можете указать пользовательскую строку параметров информации с помощью
+тега \`[info: ...]\`, чтобы заменить параметр по умолчанию \`\-a\`.
+.PP
 Возможные опции см. в документации smartmontools:
 .PP
 .RS 4
@@ -1658,6 +1661,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 Например:
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1724,7 +1731,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1780,7 +1787,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-ru.d

@@ -1357,6 +1357,9 @@ Configuration
 	именем устройства. Для контроллеров RAID устройство,
 	вероятно, фиксировано, и вам может не потребоваться использовать `%s`.
 
+	Вы также можете указать пользовательскую строку параметров информации с помощью
+	тега `[info: ...]`, чтобы заменить параметр по умолчанию `-a`.
+
 	Возможные опции см. в документации smartmontools:
 
 		:https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1364,6 +1367,7 @@ Configuration
 
 	Например:
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1396,7 +1400,7 @@ Configuration
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1412,7 +1416,7 @@ Configuration
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-ru.txt

@@ -1455,6 +1455,9 @@ PARITY — это одно из имен четности: `parity`, `2-parity`,
 именем устройства. Для контроллеров RAID устройство,
 вероятно, фиксировано, и вам может не потребоваться использовать `%s`.
 
+Вы также можете указать пользовательскую строку параметров информации с помощью
+тега `[info: ...]`, чтобы заменить параметр по умолчанию `-a`.
+
 Возможные опции см. в документации smartmontools:
 
     https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1462,6 +1465,7 @@ PARITY — это одно из имен четности: `parity`, `2-parity`,
 
 Например:
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1498,7 +1502,7 @@ PARITY — это одно из имен четности: `parity`, `2-parity`,
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1514,7 +1518,7 @@ PARITY — это одно из имен четности: `parity`, `2-parity`,
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-sv.1

@@ -1642,6 +1642,9 @@ I de specificerade ALTERNATIVEN ersätts strängen \`%s\` med
 enhetens namn. För RAID\-kontroller är enheten
 sannolikt fixerad, och du kanske inte behöver använda \`%s\`.
 .PP
+Du kan också specificera en anpassad sträng för informationsalternativ med
+hjälp av taggen \`[info: ...]\` för att ersätta standardalternativet \`\-a\`.
+.PP
 Se smartmontools dokumentation för möjliga alternativ:
 .PP
 .RS 4
@@ -1657,6 +1660,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 Till exempel:
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1723,7 +1730,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1779,7 +1786,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-sv.d

@@ -1356,6 +1356,9 @@ Konfiguration
 	enhetens namn. För RAID-kontroller är enheten
 	sannolikt fixerad, och du kanske inte behöver använda `%s`.
 
+	Du kan också specificera en anpassad sträng för informationsalternativ med
+	hjälp av taggen `[info: ...]` för att ersätta standardalternativet `-a`.
+
 	Se smartmontools dokumentation för möjliga alternativ:
 
 		:https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1363,6 +1366,7 @@ Konfiguration
 
 	Till exempel:
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1395,7 +1399,7 @@ Konfiguration
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1411,7 +1415,7 @@ Konfiguration
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-sv.txt

@@ -1454,6 +1454,9 @@ I de specificerade ALTERNATIVEN ersätts strängen `%s` med
 enhetens namn. För RAID-kontroller är enheten
 sannolikt fixerad, och du kanske inte behöver använda `%s`.
 
+Du kan också specificera en anpassad sträng för informationsalternativ med
+hjälp av taggen `[info: ...]` för att ersätta standardalternativet `-a`.
+
 Se smartmontools dokumentation för möjliga alternativ:
 
     https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1461,6 +1464,7 @@ Se smartmontools dokumentation för möjliga alternativ:
 
 Till exempel:
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1497,7 +1501,7 @@ Ett exempel på en typisk konfiguration för Unix är:
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1513,7 +1517,7 @@ Ett exempel på en typisk konfiguration för Windows är:
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-uk.1

@@ -1811,6 +1811,9 @@ PARITY — це одне з імен парності: \`parity\`,
 ймовірно фіксований, і вам може не знадобитися
 використовувати \`%s\`.
 .PP
+Ви також можете вказати користувацький рядок параметрів інформації за допомогою
+тега \`[info: ...]\`, щоб замінити параметр за замовчуванням \`\-a\`.
+.PP
 Зверніться до документації smartmontools
 для можливих опцій:
 .PP
@@ -1827,6 +1830,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 Наприклад:
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1896,7 +1903,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1952,7 +1959,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-uk.d

@@ -1514,6 +1514,9 @@ Name{number}
 	ймовірно фіксований, і вам може не знадобитися
 	використовувати `%s`.
 
+	Ви також можете вказати користувацький рядок параметрів інформації за допомогою
+	тега `[info: ...]`, щоб замінити параметр за замовчуванням `-a`.
+
 	Зверніться до документації smartmontools
 	для можливих опцій:
 
@@ -1522,6 +1525,7 @@ Name{number}
 
 	Наприклад:
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1557,7 +1561,7 @@ Name{number}
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1573,7 +1577,7 @@ Name{number}
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-uk.txt

@@ -1612,6 +1612,9 @@ PARITY — це одне з імен парності: `parity`,
 ймовірно фіксований, і вам може не знадобитися
 використовувати `%s`.
 
+Ви також можете вказати користувацький рядок параметрів інформації за допомогою
+тега `[info: ...]`, щоб замінити параметр за замовчуванням `-a`.
+
 Зверніться до документації smartmontools
 для можливих опцій:
 
@@ -1620,6 +1623,7 @@ PARITY — це одне з імен парності: `parity`,
 
 Наприклад:
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1659,7 +1663,7 @@ PARITY — це одне з імен парності: `parity`,
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1675,7 +1679,7 @@ PARITY — це одне з імен парності: `parity`,
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-zh.1

@@ -1476,6 +1476,8 @@ PARITY 是奇偶校验名称之一：\`parity\`、\`2\-parity\`、\`3\-parity\`
 对于 RAID 控制器，设备可能是固定的，
 您可能不需要使用 \`%s\`。
 .PP
+您还可以使用 \`[info: ...]\` 标记指定自定义信息选项字符串，以替换默认的 \`\-a\` 选项。
+.PP
 请参阅 smartmontools 文档以了解可能的选项：
 .PP
 .RS 4
@@ -1491,6 +1493,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 例如：
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1555,7 +1561,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1611,7 +1617,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid-zh.d

@@ -1190,6 +1190,8 @@ Configuration
 	对于 RAID 控制器，设备可能是固定的，
 	您可能不需要使用 `%s`。
 
+	您还可以使用 `[info: ...]` 标记指定自定义信息选项字符串，以替换默认的 `-a` 选项。
+
 	请参阅 smartmontools 文档以了解可能的选项：
 
 		:https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1197,6 +1199,7 @@ Configuration
 
 	例如：
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1227,7 +1230,7 @@ Configuration
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1243,7 +1246,7 @@ Configuration
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid-zh.txt

@@ -1288,6 +1288,8 @@ PARITY 是奇偶校验名称之一：`parity`、`2-parity`、`3-parity`、
 对于 RAID 控制器，设备可能是固定的，
 您可能不需要使用 `%s`。
 
+您还可以使用 `[info: ...]` 标记指定自定义信息选项字符串，以替换默认的 `-a` 选项。
+
 请参阅 smartmontools 文档以了解可能的选项：
 
     https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1295,6 +1297,7 @@ PARITY 是奇偶校验名称之一：`parity`、`2-parity`、`3-parity`、
 
 例如：
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1329,7 +1332,7 @@ Unix 的典型配置示例如下：
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1345,7 +1348,7 @@ Windows 的典型配置示例如下：
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid.1

@@ -1643,6 +1643,9 @@ In the specified OPTIONS, the \`%s\` string is replaced by the
 device name. For RAID controllers, the device is
 likely fixed, and you may not need to use \`%s\`.
 .PP
+You can also specify a custom info options string using the
+\`[info: ...]\` tag to override the default \`\-a\` option.
+.PP
 Refer to the smartmontools documentation for possible options:
 .PP
 .RS 4
@@ -1658,6 +1661,10 @@ https://www.smartmontools.org/wiki/Supported_USB\-Devices
 For example:
 .PP
 .RS 4
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
+.PD 0
+.PP
+.PD
 smartctl parity \-d sat %s
 .PD 0
 .PD
@@ -1724,7 +1731,7 @@ exclude /tmp/
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD
@@ -1780,7 +1787,7 @@ exclude \\System Volume Information
 .PD 0
 .PP
 .PD
-smartctl d1 \-d sat %s
+smartctl d1 [info: \-H \-i \-c \-A] \-d sat %s
 .PD 0
 .PP
 .PD

doc/snapraid.d

@@ -1357,6 +1357,9 @@ Configuration
 	device name. For RAID controllers, the device is
 	likely fixed, and you may not need to use `%s`.
 
+	You can also specify a custom info options string using the
+	`[info: ...]` tag to override the default `-a` option.
+
 	Refer to the smartmontools documentation for possible options:
 
 		:https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1364,6 +1367,7 @@ Configuration
 
 	For example:
 
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl parity -d sat %s
 
   smartignore DISK/PARITY ATTR [ATTR...]
@@ -1396,7 +1400,7 @@ Configuration
 		:data d3 /mnt/disk3/
 		:exclude /lost+found/
 		:exclude /tmp/
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/sg0
 		:smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1412,7 +1416,7 @@ Configuration
 		:exclude Thumbs.db
 		:exclude \$RECYCLE.BIN
 		:exclude \System Volume Information
-		:smartctl d1 -d sat %s
+		:smartctl d1 [info: -H -i -c -A] -d sat %s
 		:smartctl d2 -d usbjmicron %s
 		:smartctl parity -d areca,1/1 /dev/arcmsr0
 		:smartctl 2-parity -d areca,2/1 /dev/arcmsr0

doc/snapraid.txt

@@ -1455,6 +1455,9 @@ In the specified OPTIONS, the `%s` string is replaced by the
 device name. For RAID controllers, the device is
 likely fixed, and you may not need to use `%s`.
 
+You can also specify a custom info options string using the
+`[info: ...]` tag to override the default `-a` option.
+
 Refer to the smartmontools documentation for possible options:
 
     https://www.smartmontools.org/wiki/Supported_RAID-Controllers
@@ -1462,6 +1465,7 @@ Refer to the smartmontools documentation for possible options:
 
 For example:
 
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl parity -d sat %s
 
 7.18 smartignore DISK/PARITY ATTR [ATTR...]
@@ -1498,7 +1502,7 @@ An example of a typical configuration for Unix is:
     data d3 /mnt/disk3/
     exclude /lost+found/
     exclude /tmp/
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/sg0
     smartctl 2-parity -d areca,2/1 /dev/sg0
@@ -1514,7 +1518,7 @@ An example of a typical configuration for Windows is:
     exclude Thumbs.db
     exclude \$RECYCLE.BIN
     exclude \System Volume Information
-    smartctl d1 -d sat %s
+    smartctl d1 [info: -H -i -c -A] -d sat %s
     smartctl d2 -d usbjmicron %s
     smartctl parity -d areca,1/1 /dev/arcmsr0
     smartctl 2-parity -d areca,2/1 /dev/arcmsr0

snapraid.conf.example

@@ -129,11 +129,16 @@ exclude /lost+found/
 # Defines a custom smartctl command to obtain the SMART attributes
 # for each disk. This may be required for RAID controllers and for
 # some USB disk that cannot be autodetected.
+#
 # In the specified options, the "%s" string is replaced by the device name.
+#
 # Refers at the smartmontools documentation about the possible options:
 # RAID -> https://www.smartmontools.org/wiki/Supported_RAID-Controllers
 # USB -> https://www.smartmontools.org/wiki/Supported_USB-Devices
-#smartctl d1 -d sat %s
+#
+# In the custom command, you can also specify a custom info options string
+# using the '[info: ...]' tag to override the default '-a' option.
+#smartctl d1 [info: -H -i -c -A] -d sat %s
 #smartctl d2 -d usbjmicron %s
 #smartctl parity -d areca,1/1 /dev/sg0
 #smartctl 2-parity -d areca,2/1 /dev/sg0

snapraid.conf.example.windows

@@ -144,11 +144,16 @@ exclude \Windows\
 # Defines a custom smartctl command to obtain the SMART attributes
 # for each disk. This may be required for RAID controllers and for
 # some USB disk that cannot be autodetected.
+#
 # In the specified options, the "%s" string is replaced by the device name.
+#
 # Refers at the smartmontools documentation about the possible options:
 # RAID -> https://www.smartmontools.org/wiki/Supported_RAID-Controllers
 # USB -> https://www.smartmontools.org/wiki/Supported_USB-Devices
-#smartctl d1 -d sat %s
+#
+# In the custom command, you can also specify a custom info options string
+# using the '[info: ...]' tag to override the default '-a' option.
+#smartctl d1 [info: -H -i -c -A] -d sat %s
 #smartctl d2 -d usbjmicron %s
 #smartctl parity -d areca,1/1 /dev/arcmsr0
 #smartctl 2-parity -d areca,2/1 /dev/arcmsr0