From 618af56a13b1818e0145191073e843c18487f952 Mon Sep 17 00:00:00 2001 From: Andrea Mazzoleni Date: Tue, 21 Apr 2015 21:13:59 +0200 Subject: [PATCH] Minor changes at the documentation --- HISTORY | 10 +++++----- snapraid.1 | 8 ++++---- snapraid.d | 8 ++++---- snapraid.txt | 8 ++++---- 4 files changed, 17 insertions(+), 17 deletions(-) diff --git a/HISTORY b/HISTORY index 088db439..0547192e 100644 --- a/HISTORY +++ b/HISTORY @@ -13,7 +13,7 @@ SnapRAID HISTORY * The -e, --filter-error option doesn't write anymore fixes to unsynced files. This helps in case you are running it on a not synced array, removing the risk to revert some files to an old state. - * The -e, --filter-error option is now optimal and read only the + * The -e, --filter-error option is now optimal and reads only the minimal amount of data necessary to fix the errors. * The "diff" command returns with an error code if a "sync" is required. @@ -55,7 +55,7 @@ SnapRAID HISTORY timestamp, and then they are recognized also if moved to a different disk. Note that even if there are false positive they are identified checking the hash, so they have not effect, besides making the - process a little slower. To disable this new behaviour you can use + process a little slower. To disable this new behavior you can use the -N, --force-nocopy option. * The -i, --import command now identifies files by timestamp making it very fast in importing directories. @@ -221,7 +221,7 @@ SnapRAID HISTORY 4.1 2013/9 ========== * If the underline filesystem doesn't support the FIEMAP command, - automatically fallback to use FIBMAP for sorting files. + automatically fall back to use FIBMAP for sorting files. * Fixed the import of content files from previous version of SnapRAID that are the result of an incomplete sync. * Added a new -C, --gen-conf option to generate a dummy configuration @@ -389,7 +389,7 @@ SnapRAID HISTORY disks instead than in the parity disks. * Added a checksum at the content file to ensure its integrity. * Using fallocate() instead posix_fallocate() to avoid the very slow - posix_fallocate() fallback of writing the whole file. + posix_fallocate() fall back of writing the whole file. 1.7 2011/11 =========== @@ -425,7 +425,7 @@ SnapRAID HISTORY This avoids parity errors if the sync process is aborted without saving the content file and you made changes at the disk array before another "sync" command was done. - More specifically, deletions or truncations of not yet synched files + More specifically, deletions or truncations of not yet synced files after the aborted sync, and before the next sync command, may have damaged the parity data. New file additions were instead safe. If these conditions may have happened to you a "check" command (also diff --git a/snapraid.1 b/snapraid.1 index 3e1eb33d..7c8e4c58 100644 --- a/snapraid.1 +++ b/snapraid.1 @@ -596,7 +596,7 @@ time you wish. For example, if you have removed files from the array after the last \[dq]sync\[dq], this may result in some other files not recovered. In this case, you can retry the \[dq]fix\[dq] using the \-i, \-\-import option, -specifing where these files are now, to include them again in the +specifying where these files are now, to include them again in the recovering process. .PP If you are satisfied of the recovering, you can now proceed further, @@ -793,7 +793,7 @@ state saved in the last \[dq]sync\[dq]. If a difference is found, it\'s reverted to the stored snapshot. .PP Note that \[dq]fix\[dq] doesn\'t differentiate between errors and intentional -modifications. It inconditionally reverts the file state at the last \[dq]sync\[dq]. +modifications. It unconditionally reverts the file state at the last \[dq]sync\[dq]. .PP If no other option is specified the full array is processed. Use the filter options to select a subset of files or disks to operate on. @@ -870,7 +870,7 @@ The next two columns are the high level device id and path. The latest column if the disk name in the array. .PP In most cases you have one low level device for each disk in the -array, but in some more complex configurations, you may have multple +array, but in some more complex configurations, you may have multiple low level devices used by a single disk in the array. .PP Nothing is modified. @@ -1068,7 +1068,7 @@ you can use respectively \[dq]>&1\[dq] and \[dq]>&2\[dq]. .TP .B \-L, \-\-error\-limit Sets a new error limit before stopping execution. -By default SnapRAID stops if it encouters more than 100 +By default SnapRAID stops if it encounters more than 100 Input/Output errors, meaning that likely a disk is going to die. This options affects \[dq]sync\[dq] and \[dq]scrub\[dq], that are allowed diff --git a/snapraid.d b/snapraid.d index 5c86c424..bb6ea067 100644 --- a/snapraid.d +++ b/snapraid.d @@ -331,7 +331,7 @@ Getting Started For example, if you have removed files from the array after the last "sync", this may result in some other files not recovered. In this case, you can retry the "fix" using the -i, --import option, - specifing where these files are now, to include them again in the + specifying where these files are now, to include them again in the recovering process. If you are satisfied of the recovering, you can now proceed further, @@ -508,7 +508,7 @@ Commands If a difference is found, it's reverted to the stored snapshot. Note that "fix" doesn't differentiate between errors and intentional - modifications. It inconditionally reverts the file state at the last "sync". + modifications. It unconditionally reverts the file state at the last "sync". If no other option is specified the full array is processed. Use the filter options to select a subset of files or disks to operate on. @@ -592,7 +592,7 @@ Commands The latest column if the disk name in the array. In most cases you have one low level device for each disk in the - array, but in some more complex configurations, you may have multple + array, but in some more complex configurations, you may have multiple low level devices used by a single disk in the array. Nothing is modified. @@ -792,7 +792,7 @@ Options -L, --error-limit Sets a new error limit before stopping execution. - By default SnapRAID stops if it encouters more than 100 + By default SnapRAID stops if it encounters more than 100 Input/Output errors, meaning that likely a disk is going to die. This options affects "sync" and "scrub", that are allowed diff --git a/snapraid.txt b/snapraid.txt index 57023035..a110da35 100644 --- a/snapraid.txt +++ b/snapraid.txt @@ -352,7 +352,7 @@ time you wish. For example, if you have removed files from the array after the last "sync", this may result in some other files not recovered. In this case, you can retry the "fix" using the -i, --import option, -specifing where these files are now, to include them again in the +specifying where these files are now, to include them again in the recovering process. If you are satisfied of the recovering, you can now proceed further, @@ -548,7 +548,7 @@ state saved in the last "sync". If a difference is found, it's reverted to the stored snapshot. Note that "fix" doesn't differentiate between errors and intentional -modifications. It inconditionally reverts the file state at the last "sync". +modifications. It unconditionally reverts the file state at the last "sync". If no other option is specified the full array is processed. Use the filter options to select a subset of files or disks to operate on. @@ -646,7 +646,7 @@ The next two columns are the high level device id and path. The latest column if the disk name in the array. In most cases you have one low level device for each disk in the -array, but in some more complex configurations, you may have multple +array, but in some more complex configurations, you may have multiple low level devices used by a single disk in the array. Nothing is modified. @@ -851,7 +851,7 @@ SnapRAID provides the following options: -L, --error-limit Sets a new error limit before stopping execution. - By default SnapRAID stops if it encouters more than 100 + By default SnapRAID stops if it encounters more than 100 Input/Output errors, meaning that likely a disk is going to die. This options affects "sync" and "scrub", that are allowed