Andrea Mazzoleni
a79052baa6
Add a new --test-no-warnings option
...
It disables annoying warnings that expert user don't
want to see.
2015-11-24 18:49:20 +01:00
Andrea Mazzoleni
40265401d3
Rename the --percentage option to --plan
...
The old --percentage is still supported, but not documented anymore.
2015-11-10 19:37:23 +01:00
Andrea Mazzoleni
1917814d2d
Restore the default scrub behaviour of the previous version
...
If the user like to scrub new blocks, he can now use the -p new
option, and then call again scrub with a percentage to scrub the
old blocks.
Scrubbing old and new blocks are two different operations, and make
sense to keep them separated. Mixing them could instead raise
problematic issues, like not being able to predict the time required
for a full scrub cycle, as it depends also on the amount of synced
data.
2015-11-09 23:34:41 +01:00
Andrea Mazzoleni
104c47d106
Add a proper signal handling
...
The most common signals are now intercepted with SA_RESTART
to allow a clean interruption.
2015-10-26 19:32:41 +01:00
Andrea Mazzoleni
2b69cfa073
Extend the disk filtering to parity disk
...
You can now fix a specific parity disk,
without touching the others.
2015-10-17 17:36:40 +02:00
Andrea Mazzoleni
3e83b15bbb
Extend --force-device to ignore more erroneous conditions
...
We want to allow fix also if some disk is unaccessible,
and content files not present.
2015-10-16 23:17:38 +02:00
Andrea Mazzoleni
fb759fec84
Rename some shadow variables
...
This removes some warnings in gcc 4.6 version.
2015-10-08 22:33:41 +02:00
Andrea Mazzoleni
aa34b76203
Add a new test-read command for speed measurement
2015-10-08 19:00:55 +02:00
Andrea Mazzoleni
9bc5f9e5ce
Change the internal mapping to a tree of chunk
...
This is intended to save memory as now we can use a fixed
block of 17 bytes to store the block information, compared
to the previous 28/36 bytes.
2015-10-04 23:17:13 +02:00
Andrea Mazzoleni
23983d6e9c
Drop text file support
2015-10-01 23:24:44 +02:00
Andrea Mazzoleni
0407c945db
Change the interface for parity allocation
...
This will allow a more compact representation
of the parity allocation
2015-10-01 23:24:06 +02:00
Andrea Mazzoleni
2555248645
Extend the -p option with bad/sync/full arguments
2015-09-13 15:48:05 +02:00
Andrea Mazzoleni
aef11798b0
Clarify why filters could be rejected with a proper message
2015-05-30 13:18:16 +02:00
Andrea Mazzoleni
5c5e80a239
Change the return code for 'diff' if a sync is required
2015-04-28 19:15:16 +02:00
Andrea Mazzoleni
de0c437bd2
Put a clear separation between log and msg functions
2015-04-20 22:07:42 +02:00
Andrea Mazzoleni
adbc74f862
Suppress missing file warnings if -m is specified
2015-04-19 21:21:49 +02:00
Andrea Mazzoleni
55ad36d1a5
Add the "devices" command as an official one
2015-04-06 17:11:27 +02:00
Andrea Mazzoleni
3dde106f6d
Add extra testing for the new 'smart' command
2015-03-31 23:47:34 +02:00
Andrea Mazzoleni
3a4ce0b1e2
Use GB instead of GiB to be more consistent with HD size.
2015-03-29 22:18:21 +02:00
Andrea Mazzoleni
eb5ac437b2
Review manpage about memory size
2015-03-13 19:34:45 +01:00
Andrea Mazzoleni
83d967e2c0
Change "diff" to return an error if a "sync" is required
2015-03-02 23:01:15 +01:00
Andrea Mazzoleni
e56de653da
Introduce a new messaging system
2015-02-22 14:31:03 +01:00
Andrea Mazzoleni
2ac751b6d9
Put all the stdout output also in stdlog
2015-02-03 19:35:43 +01:00
Andrea Mazzoleni
7954e9405f
Disable stdlog if log file is not specified
2015-02-03 18:30:32 +01:00
Andrea Mazzoleni
798de7ca99
Change the flush logic for streams
...
Now stdout and stderr are always line buffered, and stdlog only
flushed on request.
2015-02-03 18:29:11 +01:00
Andrea Mazzoleni
b5ce575981
Change the log and output handling
...
Now the log file contains all the errors messages,
and all the tag lines.
2015-02-02 23:39:46 +01:00
Andrea Mazzoleni
a2a70f3e89
Fix a typo in a message
2015-01-31 09:33:05 +01:00
Andrea Mazzoleni
a435fabf90
Allow the "devices" command during operations
2015-01-26 18:25:52 +01:00
Andrea Mazzoleni
8713e6fa72
Allow to use the "smart" command while running
2015-01-25 15:34:46 +01:00
Andrea Mazzoleni
4a41adc807
Add preliminary SMART support with a new "smart" command.
2015-01-14 22:29:20 +01:00
Andrea Mazzoleni
16b872e30c
Refactors the new spin support with some rename and function splitting.
2015-01-11 17:43:31 +01:00
Andrea Mazzoleni
ffe7f6fa57
Adds new files support.c/h for low level support functions.
2015-01-02 18:52:04 +01:00
Andrea Mazzoleni
b24807704e
Adds preliminary support for spinning up and down commands.
2015-01-02 15:53:15 +01:00
Andrea Mazzoleni
0c4c1f78a4
Adds the new -L, --error-limit options.
...
And also sets the default limit to 100.
2014-12-30 10:44:11 +01:00
Andrea Mazzoleni
3245083ed7
Minor changes at the help message.
2014-12-30 09:38:37 +01:00
Andrea Mazzoleni
5cc16bd4ad
Renames -s and -t to -S and -B.
...
We need some free space in option names and these
ones are anyway intended to be manual ones.
2014-12-29 09:00:14 +01:00
Andrea Mazzoleni
c6c9e9130e
Adds new badonly and synced only options.
...
They are enabled with -e, --filter-error to limit
the operations to only bad blocks and avoiding to
restore not synced files.
2014-12-29 08:50:20 +01:00
Andrea Mazzoleni
8c98864395
Uses the OS random support instead of rand().
2014-12-27 11:56:55 +01:00
Andrea Mazzoleni
b147019224
Allows --filter-error also in dry command.
2014-12-24 09:26:29 +01:00
Andrea Mazzoleni
17db6da4cf
Fixes build issue due typo in recent change.
2014-12-09 21:06:49 +01:00
Andrea Mazzoleni
f200a1f6b8
Refreshes free space info also before first content write.
2014-12-07 00:06:53 +01:00
Andrea Mazzoleni
c647e75885
Adds regression test for autosave.
2014-11-10 23:06:14 +01:00
Andrea Mazzoleni
7e9a5e6a6d
Stores the free space in the content file.
...
This avoids the need to access data and parity disks in
the status command.
Also removed some data disk access, in list, dup and similar
commands that don't need to scan the disks.
2014-11-09 19:14:29 +01:00
Andrea Mazzoleni
7054256c62
Ensures to test also the progress update.
2014-11-04 23:51:45 +01:00
Andrea Mazzoleni
447f1f1294
Makes fix to autodetect moved files and use them in recovering.
2014-10-19 22:25:30 +02:00
Andrea Mazzoleni
e17f12f26b
Changes the import command to use a new timestamp recognition.
...
This avoid the need of prehashing all the data, that could
be very slow.
2014-10-19 21:07:17 +02:00
Andrea Mazzoleni
0f05d40f25
Adds the --test-force-scan-winfind option to use the legacy dir listing.
2014-10-03 21:24:19 +02:00
Andrea Mazzoleni
876bddcf4c
Beautifies the code.
2014-09-27 00:32:39 +02:00
Andrea Mazzoleni
d75baef775
Fixes a typo in the cmdline help.
2014-09-03 22:50:47 +02:00
Andrea Mazzoleni
2652438f6d
More logging info for scrub and commandline.
2014-06-29 10:49:13 +02:00
