From 1a668863dc4001e71b756a921fd2d59123b078dc Mon Sep 17 00:00:00 2001 From: Jonas Schievink Date: Fri, 29 Sep 2017 00:57:09 +0200 Subject: [PATCH] fix typo: isntall -> install --- pooling.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/pooling.md b/pooling.md index 59cb8b4..6b0325e 100644 --- a/pooling.md +++ b/pooling.md @@ -9,7 +9,7 @@ There are two main ways to pool drives in Linux that are favorable to using Snap MHDDFS - This used to be the poorer choice due to not being compiled into the kernel. However it became the better choice when AUFS was removed from the kernel. MHDDFS is very simple. Unlike AUFS which has file allocation abilities such as round robin, and most free space, MHDDFS only uses most free space. Meaning that files will be placed onto the drive with the most free space. This typically works well for SnapRAID as it keeps the parity file about even with the drives. Meaning a full drive doesn't cause the parity files to become too big for their own drive. To setup mhddfs, you must first download it. -`sudo apt-get isntall mhddfs` +`sudo apt-get install mhddfs` Then mount the drives you want to pool to mount points. This works well since SnapRAID can use the same mount points for making the parity files. We're going to assume that sda, sdb, and sdc are three drives in the computer.