From 1d9ea98a84dfcb99c38d7f7ea3acd0c5f4a62e4e Mon Sep 17 00:00:00 2001 From: Roland Date: Mon, 9 Oct 2023 22:08:50 -0600 Subject: [PATCH] Updating Readme with more installation instructions. --- README.md | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/README.md b/README.md index 4225f304..9c0e260b 100644 --- a/README.md +++ b/README.md @@ -97,15 +97,16 @@ Steps necessary to initialize your WROLPi after installing the Debian image from 1. Download and copy a pre-built Debian image from https://wrolpi.org onto a USB thumb-drive (USB 2 recommended) 2. Insert the thumb-drive into the laptop, boot to the thumb-drive - 1. Select "Start Installer" - 2. Install Debian 12 like usual. - 3. - * WROLPi will be installed during the Debian 12 installation without your intervention. -3. Unplug the thumb-drive after the installation has completed, login as the user _you_ created during installation. -4. Switch to the root user: `su -` -5. Initialize the WROLPi databases using the repair script: `/opt/wrolpi/repair.sh` -6. Reboot: `reboot` -7. Browse to http://wrolpi.local or the IP address of your WROLPi! + 1. Select "Start Installer" + 2. Install Debian 12 as you would like. + 1. It is recommended to use the hostname **wrolpi** + 2. (WROLPi will be installed during the installation without your intervention.) +3. Unplug the thumb-drive after the installation has completed +4. Login as the user _you_ created during installation. +5. Switch to the root user: `su -` +6. Initialize the WROLPi databases using the repair script: `/opt/wrolpi/repair.sh` +7. Reboot: `reboot` +8. Browse to http://wrolpi.local or the IP address of your WROLPi! # Raspberry Pi Install @@ -125,7 +126,7 @@ Steps necessary to initialize your WROLPi after installing the Raspberry Pi imag 1. Storage is cheaper than power. 2. Two is one, one is none. -3. In WROL mode, run silently. +3. Run silently. ## Physical properties